2017 Ram ProMaster ECO mode

Searching for Stations In Manual Mode
Pushing
orfor more than two seconds displays
the selected radio station frequency. Each time a button
is pushed, the radio station frequency is increased or
decreased according to the default search pattern for the
selected band (100 kHz for FM and 10k Hz for AM).
When the search button is pushed and held, the radio
station frequency will continue to be increased or de-
creased. If the buttons are not pushed for five seconds,
the display will show the message AUTOand manual
search mode will be canceled. When the search is
complete, the display will show the tuned band and
station in the format F1 106.9, or, if the station found
was previously stored in memory, the display will show
the channel where it is stored and the tuned station.
Mute/Pause
Pushing this button mutes the sound. The display will
switch between MUTE ONand the previous display
(3 seconds).
Pushing the button again restores the audio without chang-
ing the original volume setting. The display will show
MUTE OFF for three seconds, and then return to the
previous display mode.
When the
or, Audio, 1, 2, 3, 4, 5, 6, BAND/AS
buttons and SRC are pushed in Mute/Pausedmode,
these will be implemented and the audio will be re-
stored without changing the original volume. 4
UNDERSTANDING YOUR INSTRUMENT PANEL 135

Turn the ROTARY knob to restore the audio and change the
volume to the level selected. The display will show the
settings described in the volume function.
The other buttons should be implemented when pushed,
but the radio will remain inMUTE ONmode.
Storing Stations In Memory
Push and hold the memory buttons (1 through 6) for more
than two seconds to associate the tuned station with the
pushed button. The display will show a message in
MEMO 2 format for three seconds to confirm that the
station has been tuned in. The CH signal is then activated
and the display will show the preset number and station
frequency for three seconds 2 106.9. The display will then
return to the previous view. Accessing Preset Stations
When the preset buttons (1 through 6) are pushed for less
than two seconds the radio will tune in to the station
associated with that particular memory location. The dis-
play shows the preset number and frequency of the asso-
ciated station for three seconds. The display will then
return to the previous view.
Retuning the band: When the BAND/AS button is pushed
for less than two seconds, the radio will alternate between
bands in the sequence: FM1
FM2FM3AM1
AM2FM1. While changing bands from the FM3
band to
AM1, the display will show AMfor two
seconds and when changing from the AM2 band to
FM1, the display will show FMfor two seconds.
The display will then show the selected band and fre-
quency in the format F1 106.9for two seconds and then
return to the previous view.
136 UNDERSTANDING YOUR INSTRUMENT PANEL

Auto Switch
This function changes the on/off sequence of the radio as
described in the section:Turning the device on and off. To
enable it, turn the ROTARY knob clockwise. The display
will show AUTO ON. To disable it, turn the ROTARY
knob counterclockwise and the display will show AUTO
OFF.
Beep
With this feature is enabled, the radio will emit a beep
when any knob is activated.
Clock settings
When you select this function, the display will show the
clock. To select the field to be set, push
or. Turn the
ROTARY knob to adjust the selected field. Clock
Pushing the DISP button for more than two seconds
enables or disables the clock display. When this feature is
enabled, the display shows
CLK ONand the clock is
displayed whenever the ignition is switched on, even if the
radio is off. This function takes priority in the display
whenever you access any of the radio functions. If no
buttons are pushed within 10 seconds, the display will go
back to showing the clock. When this function is disabled,
the display shows CLK OFF.
USB Mode (MP3/WMA/AAC)
CAUTION!
To remove devices connected to the USB port, first
select the other audio source. Failure to follow this
procedure can cause damage to the connected device.
Due to the extensive range of makes and models of
storage devices available on the market, not all devices
have compatibility required for proper functioning of
Car Radios. Use only quality USB devices.
138 UNDERSTANDING YOUR INSTRUMENT PANEL

Due to the extensive range of brands and models of storage
devices available on the market, not all devices are com-
patible with proper functioning of the car radio.
NOTE:The car radio is only compatible with USB mass
storage devices that are fully compatible with the USB 2.0
standard. Use quality USB devices only.
In USB mode, the radio plays MP3, WMA and AAC files
stored on the device connected to the USB port that is
located on the lower right side of the steering wheel on the
instrument panel. To enter USB mode, you must push the SRC button. When
you enter USB mode, the display shows
LOADINGwhile
the radio checks whether the connected device is valid.
If there is no USB device, an invalid USB device, or a valid
device that is defective, the display will show ERR USB
for two seconds and the radio remains in TUNER mode. If
a valid device does not contain any playable files (i.e. MP3,
WMA or AAC), the display will show NO MUSICfor two
seconds and the radio remains in TUNER mode.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 139

name of the folder you are moving to for at least 500 ms
(seek button movements are ignored during this time),
and no longer than three seconds.
When you reach the final song in the last folder and push
again, the radio will advance to the first song in the
first folder on the USB device. When you reach the first
song in the first folder and push
again, the radio will
advance to the final song in the last folder on the USB
device.
Forward/Reverse Along The Track:
When
oris pushed for more than two seconds, the
radio will reverse or forward the music for as long as the
button is held down. The display shows the runtime of
the music in the format 003 01:32(track number and
runtime). When the operation is completed, the display
will continue to display the music runtime for two
seconds. After that it returns to the previous view.
Mute/Pause
Pushing this knob stops music playback and mutes the
sound. The display will switch between PAUSEDand the
current view (three seconds).
Push this button again to resume music playback from the
point where it left off, without changing the original volume level. The display will show
PLAYfor three
seconds. It then returns to the previous mode.
When
or, Audio, 1, 2, and SRC are pushed in
Mute/Paused mode, playback (where applicable) will
resume and the sound will be restored without chang-
ing the original volume level.
Turn the ROTARY knob to resume playing the music and
change the volume accordingly. The display will feature
the information described in the volume function.
Pushing the F-TRACK button will not resume play, but
using the (F-TRK + rotation) function will start or resume
play.
The other buttons should be implemented when pushed,
but the radio will remain in Mute/Pausedmode.
Fast Track: Pushing the F-TRK button activates FAST
TRACK mode and the display will show the name of the
current folder. If the ROTARY knob is not activated, the
radio returns to its previous state.
If the ROTARY knob is turned, the display shows the
TRKyyy message, where yyy is the track number. Turning
the knob clockwise will forwards the tracks and turning it
counterclockwise will reverse the tracks. While this is being
142 UNDERSTANDING YOUR INSTRUMENT PANEL

Shuffle (Random Playback)
Pushing the RND button enables or disables theshuffle
feature. When enabled, the RND indicator is switched on
and the display will show RND ONfor two seconds. The
display will then revert to the previous view.
When you push this button again, the function is disabled,
the RND indicator is turned off and the display will show
RND OFF for two seconds. The display then reverts to the
previous view.
If the RND function is enabled, the music forward/reverse
will be random, both in normal mode and Fast Track mode.
In this case, Buttons 1 and 2 (forward/reverse folder) have
the exact same function as
or(music forward/
reverse), respectively.
Switching Between Display Modes
When you push the DISP button for less than two seconds,
information about the track being played will alternate in
the following sequence: Track
TimeTitleAlbum
ArtistFileFolderTrack. At the first touch of
the button, the display now shows the information type
related to the track being played, for example, if the
current information is track, the display will show
TIME. If you push any other buttons or if the DISP button is not pushed for two seconds, the information
type that is on the display will be selected. When the file
that is being played does not contain the selected
information, the radio will display
NO NAME.
UCONNECT RADIOS
For detailed information about your Uconnect 3.0, and 5.0
radio, refer to your Uconnect Owner ’s Manual Supple-
ment.
UCONNECT SETTINGS
The Uconnect system uses a combination of buttons on the
touchscreen and buttons on the faceplate located on the
center of the instrument panel that allows you to access
and change the customer programmable features. Many
features can vary by vehicle.
CAUTION!
Do NOT attach any object to the touchscreen, doing so
can result in damage to the touchscreen.
144 UNDERSTANDING YOUR INSTRUMENT PANEL

Your Uconnect system may also have a Screen Off and Back
buttons on the faceplate.
Push the Screen Off button on the faceplate to turn off the
Uconnect screen. Push the Screen Off button on the face-
plate a second time to turn the screen on.
Push the Back button on the faceplate to exit out of a Menu
or certain option on the Uconnect system.
Buttons On The Touchscreen
Buttons on the touchscreen are accessible on the Uconnect
display.
Customer Programmable Features/Personal
Settings
Push the Settings button on the faceplate to display the
menu setting screen. In this mode the Uconnect system
allows you to access programmable features that may be
equipped such as Display, Clock & Date, Safety & Driving
Assistance (if equipped), Lights, Doors & Locks, Audio,
Phone/Bluetooth, SiriusXM Setup (if equipped), Restore
Settings and Clear Personal Data.NOTE:
•
Only one category may be selected at a time.
• The Back arrow will change into a Done button if any
changes are made.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting. Once the
setting is complete, either press the Back Arrow button on
the touchscreen or the Back button on the faceplate to
return to the previous menu or press the X button on the
touchscreen to return to the Main Settings screen. Pressing
the Up or Down Arrow buttons on the touchscreen on the
right side of the screen will allow you to toggle up or down
through the available settings.
146 UNDERSTANDING YOUR INSTRUMENT PANEL

IconDescription
Recirculation Button
Press and release this button to change the system between recirculation mode and outside air
mode. Recirculation can be used when outside conditions such as smoke, odors, dust, or high
humidity are present.
NOTE:
•Continuous use of the Recirculation mode may make the inside air stuffy and window fog-
ging may occur. Extended use of this mode is not recommended.
•The use of the Recirculation mode in cold or damp weather could cause windows to fog on
the inside, because of moisture buildup inside the vehicle. Select the outside air position for
maximum defogging.
•Recirculation can be used in all modes except for Defrost.
•The A/C can be deselected manually without disturbing the mode control selection.
Front Defrost Button
Turn the Knob to the Front Defrost position. Air comes from the windshield and side window
demist outlets. When the defrost button is selected, the blower level will increase. Use Defrost
mode with maximum temperature settings for best windshield and side window defrosting and
defogging.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 159