To minimize the possibility of scratching the lenses and
reducing light output, avoid wiping with a dry cloth. To
remove road dirt, wash with a mild soap solution followed
by rinsing.
Do not use abrasive cleaning components, solvents, steel
wool or other aggressive material to clean the lenses.
Glass Surfaces
All glass surfaces should be cleaned on a regular basis with
Mopar Glass Cleaner, or any commercial household-type
glass cleaner. Never use an abrasive type cleaner. Use
caution when cleaning the inside rear window equipped
with electric defrosters or windows equipped with radio
antennas. Do not use scrapers or other sharp instrument
that may scratch the elements.
When cleaning the rear view mirror, spray cleaner on the
towel or cloth that you are using. Do not spray cleaner
directly on the mirror.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet soft cloth. A mild soap solution may beused, but do not use high alcohol content or abrasive
cleaners. If soap is used, wipe clean with a clean damp
cloth.
2. Dry with a soft cloth.
7
MAINTAINING YOUR VEHICLE 491
Sliding Rear Window..................... .188
Steering ........................... .353, 354
Take-Off Adapter ........................ .340
Take-Off Operation ...................... .340
Windows ...............................38
Power Seats Down .............................113,114
Forward ............................112,113
Rearward ...........................112,113
Recline ................................113
Tilt...................................113
Up................................113,114
Power Steering Fluid ....................... .510
Pregnant Women And Seat Belts .................52
Pretensioners Seat Belts ...............................52
Programmable Electronic Features ...............231
Programming Key Fobs (Remote Keyless Entry) ......22
PTO (Power Take-Off) ...................... .340
Radial Ply Tires ........................... .384
Radiator Cap (Coolant Pressure Cap) .........477, 479
Radio Frequency General Information ................17, 28, 30, 37
Radio Operation .......................... .278Radio (Sound Systems)
..................... .276
Rain Sensitive Wiper System ...................138
Rear Axle (Differential) ...................482, 483
Rear ParkSense System ...................146, 154
Rear Window Features ...................... .187
Rear Window, Sliding ...................... .188
Reclining Rear Seats .........................118
Recreational Towing ........................ .423
Shifting Into Transfer Case Neutral (N) .........426
Shifting Out Of Transfer Case Neutral (N) .......427
Reformulated Gasoline ...................... .402
Refrigerant ........................... .464, 465
Reminder, Seat Belt ..........................42
Remote Control Starting System ...........................28
Remote Keyless Entry ..................... .22, 23
Programming Additional Key Fobs .............19
Remote Sound System (Radio) Controls ...........277
Remote Starting Uconnect
Customer Programmable Features . .250, 270
Uconnect Settings .....................250, 270
Remote Starting System .......................28
Replacement Keys ...........................19
Replacement Parts ......................... .456
Replacement Tires ......................... .389
10
INDEX 533
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENTSpecial design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
