233
4008_en_Chap09_caracteristiques-techniques_ed01-2016
Identification markingsVarious visible markings for the identification and tracing of your vehicle.
A.
M
anufacturer's plate.
I
t is riveted to the right-hand centre pillar
and carries the following information:
-
manufacturer,
-
eu type approval number,
-
v
ehicle identification number (VIN),
-
g
ross vehicle weight,
-
g
ross train weight,
-
m
aximum front axle weight,
-
m
aximum rear axle weight.
th
e tyre pressures must be checked
when the tyres are "cold", at least once
a month (vehicle having been stationary
for 1 hour or after a journey of less than
6 miles (10 km) at moderate speed).
If the tyre pressures are too low, this
increases fuel consumption.
B.
T
yre label.
t
h
is label is affixed to the driver's side
centre pillar and carries the following
information:
-
t
yre sizes,
-
t
yre pressures.C.
V
ehicle Identification Number (VIN)
under the bonnet.
t
h
is number is engraved on the bodywork
near the damper support.
th
e original tyres fitted to the vehicle
may have a load index or speed rating
higher than those given on the label;
this has no effect on the inflation
pressures.
9
technical data
