2017 Peugeot 208 fold seats

41
Boot still open
With the engine running, this is
signalled by:
-

t
his warning lamp coming on,
-

a
n alert message displayed for
a few seconds.
Vehicle moving (speed above 6
mph
(10

km/h)), this is signalled by:
-

t

his warning lamp coming on,
-

a

n alert message displayed for a few
seconds,
-
an

audible signal.
Back-up release
System for mechanically unlocking the boot in
the event of a battery or central locking fault.
Release
F Fold back the rear seats to gain access to the lock from inside the boot. F

I
nsert a small screwdriver into hole A of the
lock to unlock the tailgate.
F
M
ove the latch to the left.
Alarm
The alarm provides the following types of
monitoring:
- Perimeter monitoring
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet, etc.
- Volumetric monitoring
The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle.
- Anti-tilt (GTi version)
The system checks for any change in the
attitude of the vehicle.
The alarm is triggered if the vehicle is lifted,
moved or knocked.
2
Access

52
Armrest
Comfort and storage system for the driver and
front passenger.
Cover with opening lever
F
L
ift the lever to raise the lid.
Storage space in the console
F

P
ull the armrest fully up.
Access to rear seats
(3-door)
Folding the front seat forward
Standard model
F Pull only this control upwards to fold the
backrest and slide the whole seat for ward.
The front seat returns to its original position
when straightening the backrest. Sport model
F
Pull only this control for ward to fold the seat
backrest and move the whole seat for ward.
The front seat returns to its original position
when straightening the backrest.
Ensure that no object or person might
prevent the seat runners returning to their
original position; the return to this position
is necessary to secure the seat.
Ensure that the seat belt has reeled in
correctly so as to not impede passengers'
access to the rear seats.
Ease of use and comfort

53
One-piece rear bench
Bench seat with fixed one-piece cushion and
folding one-piece backrest.
Folding the backrest
F Move the front seats for ward if necessary.
F
P
osition the outer seat belts on the backrest
and buckle them.
F

L
ower the head restraints to the lowest
position. F

R
elease the seat backrest 2 by pressing
controls 1 simultaneously.
F

F
old the seat backrest 2 on to the fixed
cushion.
Raising the seat backrest
F Raise the seat backrest 2 .
F L atch the backrest in place, the red
indicators on each control 1 are no longer
visible.
F

U
nbuckle and return the outer seat belts to
their normal positions ready for use.
2/3 – 1/3 split rear bench
seat
Bench seat with fixed one-piece cushion and
split backrest (left-hand 2/3, right-hand 1/3)
which can be folded individually to adapt the
load space in the boot.
Folding the backrest
F Move the corresponding front seat for wards if necessary.
F

P
osition the corresponding outer seat belt
against the backrest and buckle it.
F

F
ully lower or remove the head restraint.
3
Ease of use and comfort

83
Advice
The driver must ensure that passengers use
the seat belts correctly and that they are all
fastened before setting off.
Wherever you are seated in the vehicle,
always fasten your seat belt, even for short
journeys.
Do not interchange the seat belt buckles as
they will not fulfil their role fully.
The seat belts are fitted with an inertia reel
permitting automatic adjustment of the length
of the strap to your size. The seat belt is
stowed automatically when not in use.
Before and after use, ensure that the seat belt
is reeled in correctly.
The lower part of the strap must be positioned
as low as possible on the pelvis.
The upper part must be positioned in the
hollow of the shoulder.
The inertia reels have an automatic locking
device at the time of a collision, during
sudden braking or if the vehicle turns over.
You can release the device by pulling the
strap firmly and then releasing it so that it reels in slightly.
In order to be effective, a seat belt must:
-

b
e tightened as close to the body as
possible,
-

b
e pulled in front of you with a smooth
movement, checking that it does not twist,
-

b
e used to restrain only one person,
-

n
ot show any signs of cuts or fraying,
-

n
ot be converted or modified to avoid
affecting its performance.
In accordance with current safety regulations,
for all repairs on your vehicle's seat belts, go
to a qualified workshop with the skills and
equipment needed, which a PEUGEOT dealer
is able to provide.
Have your seat belts checked regularly by a
PEUGEOT dealer or a qualified workshop,
particularly if the straps show signs of
damage.
Clean the seat belt straps with soapy water or
a textile cleaning product, sold by PEUGEOT
dealers.
After folding or moving a seat or rear bench
seat, ensure that the seat belt is positioned and reeled in correctly.
Recommendations for children
Use a suitable child seat if the passenger is
less than 12
years old or shorter than one and
a half metres.
Never use the same seat belt to secure more
than one person.
Never allow a child to travel on your lap.
For more information on Child seats , refer to
the corresponding section.
In the event of an impact
Depending on the nature and seriousness
of the impact , the pyrotechnic device may
be deployed before and independently of the
airbags. Deployment of the pretensioners
is accompanied by a slight discharge of
harmless smoke and a noise, due to the
activation of the pyrotechnic cartridge
incorporated in the system.
In all cases, the airbag warning lamp comes
on.
Following an impact, have the seat belts
system checked, and, if necessary, replaced,
by a PEUGEOT dealer or a qualified
workshop.
5
Safety

176
On the rightFuse no.Rating Functions
F01 40 AHeated rear window.
F02 10 AHeated door mirrors.
F03 30 AFront one-touch windows.
F04 -Not used.
F05 30 ARear one-touch windows.
F06 10 AFolding door mirrors.
F07 10 AFolding door mirrors.
F08 -Not used.
F09 15 AFront heated seats.
F10 20 AHi-Fi amplifier.
F11 -Not used.
F12 -Not used.
In the event of a breakdown