2017 Peugeot 208 display

13
QUESTIONRESPONSESOLUTION
There is a difference in sound quality between
the different audio sources (radio, CD, etc.). For optimum sound quality, the audio settings
(volume, bass, treble, ambience, loudness)
can be adapted to the different sound sources,
which may result in audible differences when
changing source (radio, CD, etc.).Check that the audio settings (volume, bass,
treble, ambience, loudness) are adapted to
the sources being listened to. It is advisable to
set the AUDIO functions (bass, treble, front-
rear balance, left-right balance) to the middle
position, select the musical ambience and set
the loudness correction to the "Active" position
in CD mode or to the "Inactive" position in radio
mode.
When changing the settings for treble and bass,
the ambience setting is deselected.
When changing the ambience setting, treble
and bass are reset to zero. Choosing an ambience imposes settings for
treble and bass. Modifying one without the other
is only possible with a personalised ambience.
Modify the treble and bass settings or the
ambience setting to obtain the desired sound
quality.
When changing the balance setting, distribution
is deselected. Choosing the "driver" distribution setting
imposes a balance setting.Modify the balance or distribution settings to
obtain the desired sound quality.
The reception quality of the tuned radio station
gradually deteriorates or the stored stations are
not working (no sound, 87.5
MHz is displayed,
e t c .) . The vehicle is too far from the transmitter of
the station or no transmitter is present in the
geographical area.
Activate the RDS function to enable the system
to check whether there is a more power ful
transmitter in the geographical area.
The surroundings (hills, buildings, tunnels,
underground parking, etc.) are blocking
reception, including in RDS tracking mode. This phenomenon is normal and does not
indicate a failure of the audio equipment.
The aerial is missing or has been damaged (for
example when going through a car wash or into
an underground car park). Have the aerial checked by a PEUGEOT dealer.
.
Audio system / Bluetooth®

14
Sound cut-outs of 1 to 2 seconds in radio mode. During this brief sound cut-out, the RDS
searches for any frequency permitting better
reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
Traffic announcement TA is displayed. I do not
receive any traffic information. The radio station does not broadcast traffic
information.Tune to a radio station which broadcasts traffic
information.
The stored stations are not found (no sound,
87.5
MHz is displayed, etc.). An incorrect waveband is selected.
Press the SRC/ TEL button to return to the
waveband (FM1 or FM2) on which the stations
are stored.
The CD is ejected every time or is not played. The CD is upside down, cannot be read, does not contain audio files or contains audio files
of a format that cannot be played by the audio
system.
The CD is protected by an anti-pirating system
not recognised by the audio system.-

C
heck that the CD is inserted in the player
the right way up.
-

C
heck the condition of the CD: the CD
cannot be played if it is too badly damaged.
-

C
heck the content in the case of a recorded
CD: consult the advice in the "Audio"
section.
-

T
he audio system’s CD player does not play
DVDs.
-

B
ecause of low quality, certain burned CDs
will not be read by the audio system.
The CD sound is of poor quality. The CD used is scratched or of poor quality. Insert good quality CDs and store them in
suitable conditions.
The audio settings (bass, treble, ambiences) are
unsuitable. Return bass and treble settings to 0, without
selecting an ambience.
The Bluetooth connection is cut. The battery of the peripheral may not be
sufficiently charged.Charge the battery of the peripheral device.
Audio system / Bluetooth®

15
The "USB peripheral error" or "Peripheral not
recognised" message appears on the screen.The USB memory stick is not recognised. Use only USB memory sticks formatted to FAT
32 (28 -bit file allocation table).
A telephone connects automatically,
disconnecting another telephone. Automatic connection overrides manual
connection.Modify the telephone settings to remove
automatic connection.
The iPod is not recognised when connecting to
the USB port. The iPod is of a generation that is not
compatible with the USB.
The hard disk or device is not recognised when
connecting to the USB socket. Some hard disks and devices need a power
supply greater than is provided by the audio
system.Connect the peripheral to the 230
V socket, the
12 V socket or an external power supply.
Caution : ensure that the device does not
transmit a voltage greater than 5
V (risk of
destruction of the system).
When streaming, the sound cuts momentarily. Some telephones prioritise connection of the
"hands-free" profile.Delete the "hands-free" connection profile to
improve streaming.
In "Random all" play, not all of the tracks are
played. In "Random all" play, the system can only take
into account up to 999 tracks.
With the engine off, the audio system switches
off after a few minutes of use. When the engine is switched off, the audio
system operating time depends on the battery
charge.
The switch-off is normal: the audio system
switches to economy mode and switches off to
prevent discharging the vehicle's battery.Start the vehicle’s engine to increase the battery
charge.
The message "the audio system is overheated"
appears on the display. In order to protect the installation if the
surrounding temperature is too high, the audio
system switches to an automatic thermal
protection mode leading to a reduction of the
volume or stopping of the playing of the CD.Switch the audio system off for a few minutes to
allow the system to cool.
.
Audio system / Bluetooth®

2
First steps
On/Off, volume adjustment.
Select the source:
FM1, FM2, AM, CD, AUX.
Adjust audio settings:
sound ambience, treble, bass,
loudness, left/right balance,
automatic volume.
Automatic search for a lower radio
frequency.
Select the previous CD track.
Scroll in a list.
Press and hold: rewind.
Display the list of stations received,
the CD/MP3 tracks or folders.
Press and hold: update the list of
stations received.
Manual search step by step for a
higher radio frequency.
Select the next MP3 folder.
Scroll in a list.Manual search step by step for a
lower radio frequency.
Select the previous MP3 folder.
Scroll in a list.
Cancel the current operation.
Go up one level (menu or folder).
Automatic search for a higher radio
frequency.
Select the next CD track.
Scroll in a list.
Press and hold: fast for ward.
Access to the main menu.
Select a preset radio station.
Radio, press and hold: store a
station.
Eject CD.
Steering mounted controls
Radio: select the previous / next
preset radio station.
Select the previous / next item in a
menu.
Radio: automatic search for a higher
frequency.
CD / MP3: select the next track.
CD: press and hold: fast for ward.
Change the audio source.
Confirm a selection.
Radio: automatic search for a lower
frequency.
CD / MP3: select the previous track.
CD: press and hold: rewind.
Increase volume.
Decrease volume.
Audio system

3
Mute on: cut the sound by
simultaneously pressing the volume
up and down buttons.
Mute off: press one of the two
volume buttons.Radio
Presetting a station
Press the SRC/BAND button
repeatedly to select the FM1, FM2 or
AM waveband.
Press and hold a button to preset
the station being listened to. The
name of the station is displayed and
an audible signal confirms that it has
been preset.
The external environment (hills, buildings,
tunnels, basement car parks, etc.) may
block reception, including in RDS tracking
mode. This is a normal effect of the way
in which radio waves are transmitted and
does not indicate any failure of the audio
equipment.
Selecting a station
Press a button to listen to the
corresponding preset station.
Managing the list
Press LIST to display the list of
stations received in alphabetical
o r d e r.
Select the desired radio station by
pressing one of the buttons.
Confirm with OK.
Briefly press one of the buttons to
change to the next or previous letter.
Press and hold LIST to build or
update the list of stations; audio
reception is cut momentarily.
.
Audio system

4
Press MENU.
Select " Radio".
Confirm with OK.
Select " RDS".
Confirm with OK. Select "
On" or " Off" to switch RDS
on or off.
Confirm with OK.
Receiving TA messages
The TA (Traffic Announcement) function
gives priority to TA alert messages.
To operate, this function needs good
reception of a radio station transmitting
this type of message. When a traffic
report is transmitted, the current audio
source (radio, CD, etc.) is interrupted
automatically to play the TA message.
Normal playback resumes at the end of
the transmission of the message.
Press MENU .
Select "Radio ".
RDS
RDS, if displayed, allows you to
continue listening to the same station
by automatically retuning to alternative
frequencies. However, in certain
conditions, coverage of an RDS station
may not be assured throughout the entire
country as radio stations do not cover
100% of the territory. This explains the
loss of reception of a station during a
j o u r n ey. Confirm with OK.
Select "
Traffic TA ".
Confirm with OK.
Select " On" or " Off" to activate or
deactivate the reception of traffic
messages.
Confirm with OK.
Displaying RADIO TEXT
Radio Text is information transmitted by
the radio station related to the current
programme or song.
Audio system

5
Press MENU.
Select " Radio".
Confirm with OK.
Select " INFO TEXT ".
Confirm with OK.
Select " On" or " Off" to switch Radio
Text on or off.
Confirm with OK.Media
Auxiliary socket (AUX)
Connect the portable device (MP3 player, etc.)
to the jack socket using an audio cable (not
supplied).
Press the SRC/BAND button
repeatedly until the "AUX" source is
displayed.
First adjust the volume of your portable device
(to a high level). Then adjust the volume of your
audio system. The controls are operated from
the portable device.
CD player
Insert a CD in the player; play begins
automatically.
Insert an MP3 compilation in the CD player.
The audio system searches for all of the music
tracks, which may take anything between a few
seconds and several tens of seconds, before
play begins.
Press the SRC/BAND button
repeatedly to select " CD".
Press one of these buttons to go to
the previous / next track in the list.
Press one of these buttons to select
the previous or next folder in the
order chosen.
Press and hold one of these buttons
for fast for ward or rewind.
.
Audio system

6
Playing a compilation
Press LIST to display the folder
structure of the compilation.
Select a line in the list.
Confirm with " OK".
Jump a page.
Select a folder / Playlist.
Start play of the chosen track.
Go up one level. Go back to the first level to select the track
classification:
-
By Folders : all folders containing audio
files recognised on the peripheral device,
in alphabetical order, ignoring the folder
structure.
-
By Playlist : depending on the playlists
saved.
Play mode
Press MENU .
Select "Media ".
Confirm with OK.
Select the desired play mode.
Confirm with OK to save the
changes. The play modes available are:
-

N
ormal: the tracks are played in order,
depending on the classification of the
selected files.
-
R
andom: the tracks in an album or
folder are played in a random order.
-
R
andom all: all of the tracks saved in
the media are played in random order.
-
R
epeat: the tracks played are only
those from the current album or folder.
Information and advice
The audio system can only play files with
".mp3", ".wma" or ".wav" extensions.
To avoid any playback or display issues, it is
advisable to create file names that have less
than 20 characters and without using any
special characters (e.g. «?.; ù).
In order to be able to play a recorded CDR or
CDRW, it is preferable to select the ISO 9660
level 1, 2 or Joliet standard when recording the
CD.
If the disc is burned in another format, it may
not be played correctly.
Audio system