2017 NISSAN X-TRAIL engine oil and filter change


> (GLW    0RGHO 7$@
2-24
Instrument sand controls
. Selective Unlock
When thisitem isturned on,and thedoor handle
request switchonthe driver's orfront passenger's
side door ispushed, onlythecorresponding door
is unlocked. Allthe doors canbeunlocked ifthe
door handle request switchispushed againwithin
1 minute. Whenthisitem isturned tooff, allthe
doors willbeunlocked whenthedoor handle
request switchispushed once.FromtheªUn-
lockingº menu,selectªSelective Unlockº.Use the
ENTER buttontoactivate ordeactivate this
function.
. Answer Bk.Horn (ifequipped)
When theanswer backhornison the horn will
chirp andthehazard indicators willflash once
when locking thevehicle withtheIntelligent Key or
remote keyless entryfunction.
Wipers:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. Speed Dependent (ifequipped)
The ªSpeed Dependentº featurecanbeactivated
or deactivated. FromtheªWipersº menu,select
ªSpeed Dependentº .Use theENTER
*
1
to turn
this feature ONorOFF .
. Rain Sensor (ifequipped)
The ªRain sensorº featurecanbeactivated or
deactivated. FromtheªWipersº menu,select
ªRain Sensorº .Use theENTER
*
1
to turn this
feature ONorOFF .
. Reverse Link
The ªReverse Linkºwiper feature canbeset tobe
ON orOFF .From theªWipersº menu,select
ªReverse Linkº.Use theENTER
*
1
to turn this
feature ONorOFF .
. Drip Wipe
The ªDrip Wipeº feature canbeset tobe ON or
OFF .From theªWipersº menu,selectªDripWipeº . Use
theENTER
*
1
to turn thisfeature ONor
OFF .
Maintenance
GUID-641 7F271-F1CE- 47F6-A581-84B3241915 F7
JVI0978X
1. Service
2. Filter (ifequipped)
3. Tyre
4. Other
The maintenance modeallows youtoset alerts forthe
reminding ofmaintenance intervals.To change anitem:
Select ªMaintenanceº usingthe
switch
*
1
and
press ENTER
*
1
.
Service:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forchanging theengine oiland filter. You can
set orreset thedistance forchecking orreplacing
these items. Forscheduled maintenance itemsand
intervals, seeaseparate maintenance booklet. Filter
(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forchanging theoilfilter. You can setorreset
the distance forchecking orreplacing theseitems. For
scheduled maintenance itemsandintervals, seea
separate maintenance booklet.
T yre:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forreplacing tires.You can setorreset the
distance forreplacing tires.
WARNING:
The tirereplacement indicatorisnot asubstitute
for regular tirechecks, including tirepressure
checks. SeeªChanging tiresandwheelsº (P.8-
37) .Many factors including tireinflation, align-
ment, driving habitsandroad conditions affect
tire wear andwhen tiresshould bereplaced.
Setting thetire replacement indicatorfora
certain drivingdistance doesnotmean your
tires willlast that long. Usethetire replacement
indicator asaguide onlyandalways perform
regular tirechecks. Failuretoperform regular
tire checks, including tirepressure checkscould
result intire failure. Serious vehicledamage
could occurandmay lead toacollision, which
could result inserious personal injuryordeath.
Other:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forchecking orreplacing maintenance items
other thantheengine oil,oilfilter andtires. Other
maintenance itemscaninclude suchthings asair filter
or tire rotation. You can setorreset thedistance for
checking orreplacing theitems.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-6
Starting anddriving
from thetire pressure sensors,andthe
TPMS willnotfunction properly.
Some devices andtransmitters maytemporarily inter-
fere with theoperation ofthe TPMS andcause thelow
tire pressure warninglighttoilluminate. Someexam-
ples are:
. Facilities orelectric devices usingsimilar radio
frequencies arenear thevehicle.
. Ifatransmitter settosimilar frequencies isbeing
used inor near thevehicle.
. Ifa computer (orsimilar equipment) oraDC/AC
converter isbeing usedinor near thevehicle.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
TPMS resetting
GUID-F7 6622F1-0B9 8-4141-BFE3 -22038209B548
T o keep theTPMS functioning properly,the reset
operation mustbeperformed inthe following cases.
. when thetirepressure isadjusted
. when atire orawheel isreplaced
. when thetires arerotated
Perform thefollowing procedures toreset theTPMS.
1. Park thevehicle inasafe andlevel place.
2. Apply theparking brakeandplace theshift lever in
the ªPº (Park) position.
3. Adjust thetire pressure onallfour tires tothe
recommended COLDtirepressure shownonthe
tire placard. Useatire pressure gaugetocheck
the tirepressure.
4. Place theignition switchinthe ªONº
position.
JVS0434X
Steering-wheel- mountedcontrols(leftside)
5. Use the
switch
*
1
until ªSettingsº appears,
and press ENTER
*
1
.
6. Use the
switch
*
1
until ªTire Pressuresº is
selected, andpress ENTER
*
1
.
7. Use the
switch
*
1
until ªCalibrateº is
selected, andpress ENTER
*
1
. 8.
Use the
switch
*
1
until ªStartº isselected,
and press ENTER
*
1
to reset theTPMS. When
the TPMS resetting starts,themessage ªTPMS
resettingº willbedisplayed.
9. After resetting theTPMS, drivethevehicle for
several minutes atspeeds above25km/h (16
MPH) .
If the low tirepressure warninglightilluminates after
the resetting operation, itmay indicate thattheTPMS
is not functioning properly.Have thesystem checked
by aNISSAN dealer.
For information regardingthelow tirepressure warning
light, seeªLow tirepressure warninglightº(P.2-14) .
DIESEL PARTICULA TEFILTER (DPF) (if
equipped)
GUID-5A9 CD1A0-AAA1 -48F8-8DC8-EB7CA86C2 ADF
WARNING:
. Becareful nottoburn yourself withexhaust
gases.
. Do not park thevehicle overflammable
materials suchasdry grass, wastepaperor
rags, asthey mayburn easily.
. Use thespecified engineoilfor Diesel
Particulate Filter(DPF) equipped models.
For details, seeªRecommended Fluids/lu-
bricants andcapacitiesº (P.9-2) .
CAUTION:
The DPF becomes extremely hotafter burning
particulate matter.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-10
Maintenance anddo-it-yours elf
T32A1308 27-7FBFDE4 2-D934-4EBF-A456-15EF83DB52F C
CHECKING ENGINEOILLEVEL
T32A1308 27-832AD9AE -E088-46FB-B20C-AC C097451A7F
JVM0423X
QR25 andMR20 engine
JVM0435X
R9M engine
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Remove thedipstick andwipe itclean. 6.
Reinsert thedipstick allthe way.
7. Remove thedipstick andcheck theoillevel. It
should bewithin therange
*
C
.
8. Ifthe oillevel isbelow
*
A
, remove theoilfiller cap
and pour therecommended oilinto theopening.
Do not overfill
*
B
.
When fillingtheengine oil,donot remove
the dipstick.
9. Recheck theoillevel withthedipstick.
It is normal toadd some oilbetween oil
maintenance intervalsorduring thebreak -in
period, depending onthe severity ofoperat-
ing conditions.
CAUTION:
The oillevel should bechecked regularly.
Operating yourvehicle withaninsufficient
amount ofoil can damage theengine, andsuch
damage isnot covered bythe warranty.
CHANGING ENGINEOILAND OILFILTER
T32A130827- 17863BB7-3386-4EB2-B54 2-3228E21833C2
WARNING:
. Used oilmust bedisposed ofproperly. Never
pour ordump oilinto theground, canals,
rivers, etc.It should bedisposed ofatproper
waste facilities. NISSANrecommends hav-
ing your oilchanged byaNISSAN dealer.
. Be careful nottoburn yourself, asthe
engine oilmay behot.
. Prolonged andrepeated contactwithused
engine oilmay cause skincancer.
. Avoid directskincontact withused oil.If
contacted, washthoroughly withsoap or hand
cleaner andplenty ofwater assoon as
possible.
. Store usedengine oilinmarked containers
out ofthe reach ofchildren.
V ehicle set-up
GUID-EF 5792C3-0A80 -4BDF-944F-8C21E6 FF05DC
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Raise andsupport thevehicle usingasuitable
floor jackandsafety jackstands.
.
Place thesafety jackstands underthevehicle
jack -up points.
.
A suitable adaptershouldbeattached tothe
jack stand saddle.
6. Remove theplastic engine undercover (if
equipped) .
.
Remove theplastic clipsfromtheundercover.
Engine oiland filter
T32A1308 27-6F86E2B7-D38C-4 534-AFED-674BD03BA210
QR25DE andMR20DD engine:
ENGINE OIL
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-12
Maintenance anddo-it-yours elf
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Remove theplastic coverovertheoilfilter location
by removing thesmall plastic clipsasillustrated.
(For QR25DE engine)
5. Loosen theoilfilter withanoilfilter wrench.
6. Remove theoilfilter byturning itby hand.
7. Wipe theengine oilfilter mounting surfacewitha
clean cloth.
Be sure toremove anyoldgasket remaining onthe
mounting surface. 8.
Apply newengine oiltothe gasket ofthe new oil
filter.
9. Screw inthe oilfilter untilaslight resistance isfelt
and then tighten anadditional 2/3ofaturn to
secure thefilter.
Oil filter tightening torque:
15 to20 N´m
(1.5 to2.0 kg-m, 11to15 ft-lb)
10. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
29 to39 N´m
(3.0 to4.0 kg-m, 22to29 ft-lb)
11. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
When fillingtheengine oil,donot remove
the dipstick.
12. Securely installtheoilfiller cap.
13. Start theengine.
14. Check thedrain plugforany sign ofleakage.
15. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
16. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .) R9M
engine:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SDI2149
1 Oilfiller element
2 O-ring
3 Oilfilter cover
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Loosen theoilfilter cover withawrench.
5. Remove theengine oilfilter cover thentheoilfilter
element.
6. Remove therubber O-ring fromthefilter cover.
7. Wipe theentire oilfilter cover withaclean cloth.
Be sure toremove anyoldO-ring remaining onthe
mounting surface. 8.
Apply newengine oiltothe O-ring.
Install thenew O-ring onthe new oilfilter element.
9. Insert theoilfilter element intotheengine oilfilter
cover.
10. Screw inthe oilfilter cover untilaslight resistance
is felt, and then tighten thefilter completely .
Oil filter cover tightening torque:
25 N´m
(2.6 kg-m, 18ft-lb)
11. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
50 N´m
(5.1 kg-m, 36.9ft-lb)
12. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
13. Securely installtheoilfiller cap.
14. Start theengine.
15. Check thedrain plugforany sign ofleakage.
16. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
17. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .)
After operation
T32A1308 27-3D1A869 1-255E-47E3-9C50-DDE5 E8CFBD36
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
PRO TECT ENVIRONMENT
T32A1308 27-208605 74-F3E8-4014 -8CD9-B62C347302 4F
It is illegal topollute drains,watercourses andsoil. Use
authorized wastecollection facilities,including civil
amenity sitesandgarages providing facilitiesfor
disposal ofused oiland used oilfilters. Ifin doubt,
contact yourlocal authority foradvice ondisposal.
The regulations concerningthepollution ofthe
environment willvary from country tocountry.
Maintenance anddo-it-yours elf
8-13
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
9-2
T echnical information
T32A1308 27-1F547A41- 0690-4B8E-BA96-B9DA7 D980C17
The following areapproximate capacities.Theactual refillquantities maybeslightly different. Whenrefilling, followtheprocedures instructedinthe ª8.Maintenance anddo-it-
yourselfº sectiontodetermine theproper refillcapacity .
Capacity (Approximate)
RecommendedFluidsandLubricants
Liter Imp
measure
Fuel 6013-1/4galSee
ªFuel informationº (P.9-4) .
Engine oil*
QR25DEWith
oilfilter change
4.6 4qt Gasoline
engine:
Except forKazakhstan, UkraineandSouth Africa
. Genuine NISSAN engineoil
. APIgrade: SL,SM orSN
. ILSAC grade:GF-3,GF-4orGF-5
For Kazakhstan, UkraineandSouth Africa
. Genuine NISSAN engineoil
. APIgrade: SL,SM orSN
. ILSAC grade:GF-3,GF-4orGF-5
. ACEA A1/B1, A3/B3,A3/B4, A5/B5,C2orC3
Diesel engine:
With Diesel Particulate filter
. Genuine NISSAN engineoil
. ACEA C4LOW SAPS, Viscosity SAE5W-30
Without DieselParticulate filter
. Genuine NISSAN engineoil
. ACEA A3/B4, Viscosity SAE5W-30
For additional information, seeªRecommended SAEviscosity numberº(P.9-
4) .
Drain
andrefill Withoutoilfilter
change 4.3
3-3/4
qt
MR20DD With
oilfilter change
3.83-3/8
qt
Without oilfilter
change 3.6
3-1/8
qt
R9M With
oilfilter change
5.54-7/8
qt
Without oilfilter
change
5.14-1/2
qt
Cooling system(withreservoir)
Total QR25DE
Except
forthe Mid-
dle East andSouth
Africa 8.2
7-1/4qtFor
Europe:
. Genuine NISSAN EngineCoolant orequivalent inits quality*
Except forEurope:
. Genuine NISSAN EngineCoolant (blue)orequivalent*
* Use Genuine NISSANEngineCoolant, orequivalent inits quality ,in order to
avoid possible aluminum corrosionwithintheengine cooling systemcaused
by the use ofnon-genuine enginecoolant.
Note thatanyrepairs forthe incidents withintheengine cooling
system whileusing non-genuine enginecoolant maynotbecovered
by the warranty evenifsuch incidents occurredduringthewarranty
period.
For
theMiddle East
and South Africa 9.0
7-7/8qt
MR20DD MT
model 8.57-1/2
qt
CVT model 8.77-5/8
qt
R9M MT
model 7.97
qt
CVT model 8.17-1/8
qt
Reservoir QR25DE
and
MR20DD Ð
0.853/4
qt
R9M Ð0.571/2
qt
Differential gearoil ÐÐ.
Genuine NISSAN Differential OilHypoid SuperGL-5 80W-90 orAPI
GL -5, Viscosity SAE80W-90
T ransfer oil ÐÐ.
Genuine NISSAN Differential OilHypoid SuperGL-5 80W-90 orAPI
GL -5, Viscosity SAE80W-90
RECOMMEN DEDFLUIDS/
LUBRICANTS ANDCAPACITIES
&RQGLWLRQ
([FHSWIRU&KLQD