2017 NISSAN MURANO PLATINUM check engine

[x] Cancel search: check engine

Page 100 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual If this indicator light comes on steady for 20 sec-
onds and then blinks for 10 seconds when the
engine is not running, it indicates that the vehicle
is not ready for an emission control system
inspec

Page 125 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual The climate controlled seat warms up or cools
down the front seat by blowing warm or cool air
from under the surface of the seat. The climate
control switch is located on the center console.
The clima

Page 332 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual ●The Driver Attention Alert system may
not operate properly and may not pro-
vide an alert in the following conditions:
– Poor road conditions such as an un- even road surface or pot holes.
– St

Page 338 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual WARNING
●If the engine is not running or is turned
off while driving, the power assist for
the steering will not work. Steering will
be harder to operate.
● When the power steering warning light
i

Page 340 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual WARNING
Do not pump the brake pedal. Doing so
may result in increased stopping
distances.
Self-test feature
The ABS includes electronic sensors, electric
pumps, hydraulic solenoids and a computer. The

Page 344 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual FREEING A FROZEN DOOR LOCK
To prevent a door lock from freezing, apply de-
icer through the key hole. If the lock becomes
frozen, heat the key before inserting it into the key
hole, or use the NISSAN

Page 374 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual CHECKING ENGINE COOLANT
LEVEL
Check the coolant levelin the reservoir when
the engine is cold. If the coolant level is below
the MIN level
B, add coolant to the MAX level
A. If the reservoir is empt

Page 375 of 466

NISSAN MURANO PLATINUM 2017  Owners Manual CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and applythe parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn off the engine. Wait mo
Page:   1-8 9-16 next >