2017 MITSUBISHI L200 child restraint

Mass groupSize classFixture
Vehicle ISO-
FIX positions
Recommended Child Restraint Systems* 1UN-R44 Approval
No.Rear outboardII & III -15 kg to
36 kg ILKIDFIX: MZ314804E1-04301198
* 1
: MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point.
CAUTIONl When installing a child restraint system, remove the head restraint from the seat.
l When attaching a child restraint system to the rear seat, adjust the front seat to prevent the front seatbacks from touching the child’s feet and child restraint
system.Definition of characters to be inserted in the table above:
l IUF- Suitable for ISOFIX forward child restraints systems of universal category approved for use in the mass group.
l IL- Suitable for particular ISOFIX child restraint systems. See the above table of “Recommended Child Restraint Systems”.
l X- ISOFIX position not suitable for ISOFIX child restraint systems in this mass group.

i-Size child restraint system
E00464700037
Seating positionSecond outboardi-Size child restraint systemi-UDefinition of characters to be inserted in the table above:
l i-U- Suitable for i-Size “universal” child restraint system forward and rearward facing.

Child restraint
4-15OKTE17E1Seat and seat belts4

Suitability for various seating positions
E00406802751
Single cabMass groupSeating positionRecommended Child Restraint Systems*1UN-R44
Approval No.Front passenger0 - Up to 10 kgX——0+ - Up to 13 kgX——
I -9 kg to 18 kgUF, L
G 0/1 S ISOFIX (Child restraint system for East area): MZ314390E
G 0/1 S ISOFIX (Child restraint system for Central-South area): MZ314390CS
G 0/1 S ISOFIX (Child restraint system for North area): MZ314390N
E4-03443416
DUO plus: MZ313045E1-04301133II & III -15 kg to
36 kgUF, LKID plus: MZ314250E1-04301169KIDFIX: MZ314804E1-04301198*1 : MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point.CAUTIONl When installing a child restraint system, remove the head restraint from the seat.
l When installing a child restraint system on the front passenger seat, please move the seatback position 1 step rearward from the upright position.
Child restraint
4-16OKTE17E1Seat and seat belts4

Definition of characters to be inserted in the table above:
lUF- Suitable for front-facing “universal” category restraints approved for use in this mass group.
l L- Suitable for particular child restraints. See the above table of “Recommended Child Restraint Systems”.
l X- Seat position not suitable for children in this mass group.
Club cab
Mass group
Seating position
Recommended Child Restraint Systems *1UN-R44
Approval No.
Front passengerRear Out- boardActivated air- bagDeactivated
Airbag *20 - Up to 10 kgXUX——0+ - Up to 13 kgXU, LXBABY-SAFE plus: MZ314393E1-04301146
I -9 kg to 18 kgXU, LX
G 0/1 S ISOFIX (Child restraint system for East
area): MZ314390E
G 0/1 S ISOFIX (Child restraint system for Central- South area): MZ314390CS
G 0/1 S ISOFIX (Child restraint system for North area): MZ314390N
E4-03443416
DUO plus: MZ313045E1-04301133II & III -15 kg to
36 kgXU, LXKID plus: MZ314250E1-04301169KIDFIX: MZ314804E1-04301198*1 : MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point. *2 : With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch.
Child restraint
4-17OKTE17E1Seat and seat belts4

CAUTIONlWhen installing a child restraint system, remove the head restraint from the seat.
l When installing a child restraint system (Mass group II & III) on the front passenger seat, please move the seatbacks position to 2 steps rearward from
upright position.Definition of characters to be inserted in the table above:
l U- Suitable for “universal” category restraints approved for use in this mass group.
l L- Suitable for particular child restraints. See the above table of “Recommended Child Restraint Systems”.
l X- Seat position not suitable for children in this mass group.
Double cab
Mass group
Seating position
Recommended Child Re-
straint Systems *1UN-R44
Approval No.
Front passengerRear Out- boardRear centreActivated air- bagDeactivated
Airbag *20 -Up to 10 kgXUUU——0+ -Up to 13 kgXU, LU, LU, LBABY-SAFE plus:
MZ314393E1-04301146*1: MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point. *2 : With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch.
Child restraint
4-18OKTE17E1Seat and seat belts4

Mass group
Seating position
Recommended Child Re-straint Systems *1UN-R44
Approval No.
Front passengerRear Out- boardRear centreActivated air- bagDeactivated
Airbag *2
I -9 kg to 18 kgXU, LU, LU, L
G 0/1 S ISOFIX (Child re-
straint system for East area): MZ314390E
G 0/1 S ISOFIX (Child re- straint system for Central-
South area): MZ314390CS G 0/1 S ISOFIX (Child re-
straint system for North area): MZ314390N
E4-03443416
DUO plus: MZ313045E1-04301133II & III -15 kg to
36 kgXU, LU, LXKID plus: MZ314250E1-04301169KIDFIX: MZ314804E1-04301198*1 : MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point. *2 : With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch.
Child restraint
4-19OKTE17E1Seat and seat belts4

CAUTIONlWhen installing a child restraint system, remove the head restraint from the seat.
l Child restraint system with support leg can not be suitable on the rear centre seat.
l When installing a child restraint system (Mass group II & III) on the front passenger seat, please move the seatbacks position to 2 steps rearward from
upright position.
l When attaching a child restraint system to the rear seat, adjust the front seat to prevent the front seatbacks from touching the child’s feet and child restraint
system.
l Pull down the head restraint of the child restraint after the child gets down from the child restraint when you use the “KID-FIX” or “KID PLUS” in the rear
seat to prevent the head restraint of the child restraint from touching the rear glass.
And make sure the head restraint is adjusted and properly positioned when the child sits in the child restraint system.Definition of characters to be inserted in the table above:
l U- Suitable for “universal” category restraints approved for use in this mass group.
l L- Suitable for particular child restraints. See the above table of “Recommended Child Restraint Systems”.
l X- Seat position not suitable for children in this mass group.

Child restraint
4-20OKTE17E1Seat and seat belts4

Installing a child restraint sys-tem to the lower anchorage (ISOFIX child restraint mount-ings) and tether anchorage (Double cab)
E00408902147
Lower anchorage location
Your vehicle’s rear seat is fitted with lower anchorages for attaching a child restraint sys-tem with ISOFIX mountings.
Tether anchorage location
There are 2 child restraint anchorage points on the vertical panel, located behind the rear
seat.
These are for securing a child restraint sys- tem tether strap to each of the 2 rear seating
positions in your vehicle.
*: Front of the vehicle
WARNINGl Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehi- cle.Child restraint system with
ISOFIX mountings (Doublecab)
E00409001614
The child restraint system is designed only
for seats that incorporate lower anchorages. Retain the child restraint system using the
lower anchorages.
It is not necessary to retain the child restraint system using the vehicle’s seat belts.
A- Child restraint system connectors
Child restraint
4-21OKTE17E1Seat and seat belts4Type 1 (ISOFIX marking) Type 2 (i-size marking)

To install
1.Remove any foreign material in or
around the connectors and ensure the ve-
hicle seat belt is in its normal storage po-
sition.
2. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint.
Refer to “Head restraints*” on page
4-05.
3. Push the child restraint system’s connec-
tors (A) into the lower anchorages (B) inaccordance with the instructions provi-
ded by the child restraint system’s man-
ufacturer.
A- Connector B- Lower anchorage
If your child restraint system has a sup- port leg, make sure that there is a sup-
port leg at the stable position on the
floor.
If your child restraint system with a teth- er strap, perform the step 4 through 8.
If your child restraint system without a
tether strap, perform the step 8.
4. Drop the child restraint’s tether strap (C)
down from the clearance between the rear seatback and back panel trim.5. Tip the armrest forward. Open the two
fasteners (D) that are located in the space where the armrest are stowed.
6. Open the inner cover.
7. Put your hand in the opening of the two
fasteners, attach the tether strap hook (E)
to the tether anchorage (F), and securely tighten the tether strap.
Child restraint
4-22OKTE17E1Seat and seat belts4