2017 MERCEDES-BENZ SPRINTER jack points

Brake fluidChecking the level ......................... 219
Display message ............................ 180
Notes ............................................. 279
Warning lamp ................................. 192
Brake force distribution, elec-
tronic
see EBD (electronic brake force
distribution)
Brake lamps
Replacing bulbs ............................... 90
Brake lamps (Chassis Cab)
Replacing bulbs ............................... 91
Brake linings
Display message ............................ 179
Indicator lamp ................................ 194
Brake pads/linings
New ............................................... 133
Brake system
Malfunction .................................... 179
Warning lamp ................................. 191
Brakes
ABS .................................................. 53
Adaptive Brake Assist .................... 140
Applying the parking brake ............ 128
BAS .................................................. 54
Brake fluid (notes) ......................... 279
Checking brake fluid level .............. 219
Display messages .......................... 179
EBD .................................................. 55
Important safety notes .................. 132
Maintenance .................................. 191
New brake pads/linings ................ 133
Parking brake (notes) ..................... 133
Riding tips ...................................... 132
Breakdown
Fire extinguisher ............................ 238
First-aid kit .................................... 237
Jump-starting ................................. 238
Reflective safety jacket .................. 237
Vehicle tool kit ............................... 236
Warning lamp ................................. 237
Warning triangle ............................ 237
see Flat tire
see Towing away
Bulb
see Changing bulbs
Bulb failure indicator .......................... 80C
California
Important notice for retail cus-
tomers and lessees .......................... 23
Car
see Vehicle
Care
Access step in the bumper ............ 233
Car wash ........................................ 229
Display ........................................... 233
Exterior lights ................................ 232
Interior ........................................... 233
Notes ............................................. 229
Paint .............................................. 231
Plastic trim .................................... 234
Power washer ................................ 230
Rear view camera .......................... 232
Roof lining ...................................... 234
Seat belt ........................................ 234
Seat cover ..................................... 234
Selector lever ................................ 234
Sensors ......................................... 232
Sliding door ................................... 233
Steering wheel ............................... 234
Step (electrical) ............................. 233
Trim pieces .................................... 234
Washing by hand ........................... 230
Washing the engine ....................... 230
Wheels ........................................... 231
Windows ........................................ 231
Wiper blades .................................. 231
Cargo compartment
Activating/deactivating ventila-
tion ................................................ 115
Cargo compartment floor ................... 29
Cargo tie-down points and tie
downs
Important safety notes .................. 210
Cargo tie-down rings
Installing ........................................ 212
Permissible tensile load ................. 282
Carrier system
Ladder rack ................................... 213
CD player/CD changer ...................... 165
Cell phone
see Mobile phone
Center console overview .................... 36
6Index

J
JackJacking points ................................ 263
Preparation .................................... 263
Storage location ............................2 36
Using ............................................. 263
Jump-starting ..................................... 238
K
Key
Position in the ignition lock ............ 117
Key positions ..................................... 117
Kickdown ...........................................1 23
L
Lamps
see Warning and indicator lamps
Lane Keeping Assist
Activating/deactivating ................. 144
Function/notes .............................1 43
Language
Display (vehicles with steering
wheel buttons) ............................... 167
Lashing points and tie downs
Permissible tensile load ................. 281
LATCH-type (ISOFIX) child seat
anchors ................................................ 50
License plate lamp
Replacing bulbs ............................... 91
License plate lamp (Chassis Cab)
Replacing bulbs ............................... 91
Light sensor ......................................... 81
Lighting
see Lights
Lights
Activating/deactivating daytime
running lamps (on-board com-
puter with steering wheel but-
tons) .............................................. 168
Activating/deactivating surround
lighting (vehicles with steering
wheel buttons) ............................... 169
Automatic headlamp mode .............. 81
Bulb failure indicator ........................ 80
Cornering light function ................... 83
Driving abroad ............................... 132 Fog lamps ........................................ 81
Hazard warning lamps ..................... 83
Headlamp range .............................. 82
High beam flasher ............................ 82
High-beam headlamps ..................... 82
Highbeam Assist .............................. 84
Important safety notes .................... 80
Light switch ..................................... 80
Low-beam headlamps ...................... 80
Parking lamps .................................. 80
Rear fog lamp .................................. 81
Setting the exterior lighting
delayed switch-off (vehicles with
steering wheel buttons) ................. 169
Switching the daytime running
lamps on/off (switch) ...................... 80
Turn signals ..................................... 82
see Changing a bulb
see Interior lighting
Limited Warranty ................................ 23
Load distribution ............................... 210
Load securing aids
Carrier systems ............................. 212
Loading gui deli
nes
Important safety notes .................. 208
Loading rails
Installing cargo tie-down rings ....... 212
Maximum tensile strength ............. 282
Loads
Securing ........................................ 210
Transporting .................................. 208
Locator lighting
Setting (vehicles with steering
wheel buttons) ............................... 169
Locking
see Central locking
Locking and unlocking manually ....... 63
Locking centrally
see Central locking
LOW RANGE ....................................... 145
LOW RANGE transmission ratio ....... 145
Low-beam headlamps
Display message ............................ 182
Driving abroad ............................... 132
Replacing bulbs ............................... 88
Switching on/off .............................. 80
Lumbar support ................................... 73
Index13

When loading your vehicle for driving off-road or
on a construction site, keep the vehicle's centerof gravity as low as possible.
Checklist before driving off-road
XCheck the fuel and DEF levels (Ypage 159)
and top up (Ypage 126).
XEngine: check the oil level (Ypage 216) and
add oil (Ypage 218).
Before driving up or down steep gradients, fill
the oil to the maximum level.
iIf you drive up or down steep gradients, the
4 symbol may appear in the display. The
engine operating safety is not put at risk if you
have filled the engine oil to the maximum level
before the journey.
XVehicle tool kit: check that the jack is work-
ing (Ypage 236).
XMake sure that a lug wrench (Ypage 236),
wooden underlay for the jack, a robust tow
cable and a folding spade are carried in the
vehicle.
XWheels and tires: check the tire tread depth
(Ypage 244) and tire pressure
(Ypage 246).
Rules for driving off-road
!Always bear the vehicle's ground clearance
in mind and avoid obstacles, e.g. deep ruts.
Obstacles may damage the following parts of
the vehicle:
Rthe chassis
Rthe drive train
Rthe fuel and supply tanks
For this reason, you should always drive
slowly when driving off-road. If you have to
drive over obstacles, have the front
passenger direct you.
iWe recommend that you additionally carry a
shovel and a recovery rope with shackle in the
vehicle.
REnsure that loads and items of luggage are
securely stowed or lashed down
(
Ypage 208).
RBefore driving off-road, stop the vehicle and
shift to a low gear.
RIf the surface demands it, temporarily deacti-
vate ASR when pulling away (Ypage 54).
ROnly drive off-road with the engine running
and a gear engaged.
RDrive slowly and smoothly. Walking pace is
necessary in many situations.
RAvoid spinning the drive wheels.
RMake sure that the wheels always remain in
contact with the ground.
RDrive with extreme care over unknown terrain
where you can only see for a short distance.
As a precaution, get out of the vehicle to take
a look at the route to be taken in advance.
RCheck the water depth before fording.
RWatch out for obstacles (e.g. rocks, holes,
tree stumps and ruts).
RAvoid edges where the surface could crumble
or break away.
Checklist after driving off-road
!If you detect damage to the vehicle after
driving off-road, have the vehicle checked
immediately at a qualified specialist work-
shop.
Off-road driving places a higher demand on your
vehicle than normal road operation. Check your
vehicle after driving on rough terrain. By doing
so you will notice any damage in good time and
reduce the risk of an accident for yourself and
other road users. Clean your vehicle thoroughly
before driving on public roads.
Observe the following points after driving off-
road, on construction sites and before driving on
public roads:
XVehicles with all-wheel drive: deactivate
all-wheel drive (Ypage 145).
XActivate ASR (Ypage 54).
XClean the headlamps and tail lamps and
check them for damage.
XClean the front and rear license plates.
XClean the windshield, windows and exterior
mirrors.
XClean the steps, door sills and grab handles.
This increases safety of footing.
XClean the wheels and tires, wheel arches and
the underbody of the vehicle with a water jet.
This increases road grip, especially on wet
road surfaces.
136Driving tips
Driving and parking

Mounting a wheel
Vehicle preparation
XStop the vehicle as far away as possible from
traffic and on a level, firm and non-slip sur-
face.
XIf your vehicle poses a risk to approaching
traffic, switch on the hazard warning lamps.
XApply the parking brake.
XTurn the front wheels to the straight-ahead
position.
XMove the selector lever of the automatic
transmission to position P.
XSwitch off the engine.
XPassengers should leave the vehicle. Make
sure that the passengers are not endangered
as they do so.
XMake sure that no one is near the danger area
while the wheel is being changed. Anyone
who is not directly assisting in the wheel
change should, for example, stand behind the
barrier.
XPlace the warning triangle or warning lamp at
a suitable distance.
Observe legal requirements.
XSecure the vehicle to prevent it from rolling
away.
iObserve the safety notes on parking in the
section on "Driving and parking"
(
Ypage 127).
XOn level terrain: place chocks or other suit-
able objects under the front and rear of the
wheel that is diagonally opposite the wheel to
be changed.
XOn slight inclines: place chocks or other
suitable objects under the wheels on the front and rear axles opposite the wheel to be
changed.
XTake the vehicle tool kit and the jack from the
footwell on the front-passenger side
(
Ypage 236).
XRemove the spare wheel from the spare wheel
bracket (Ypage 269). Observe the safety
notes in the "Spare wheel" section
(
Ypage 268).
XOn wheels with wheel bolts, remove the hub
caps.
XAssemble the lug wrench extension using the
middle rod and the rod with the largest diam-
eter from the three-piece jack pump lever.
XStarting with the middle rod, slide the lug
wrench extension as far as it will go onto the
lug wrench.
XUsing lug wrench :, loosen the wheel bolts/
wheel nuts on the wheel to be changed by
about one full turn. Do not unscrew the wheel bolts/nuts completely.
Raising the vehicle
GWARNING
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip over with the vehicle raised.
There is a risk of injury.
Only position the jack at the appropriate jack-
ing point of the vehicle. The base of the jack
must be positioned vertically, directly under
the jacking point of the vehicle.
GWARNING
On uphill and downhill slopes, the jack could
tip over with the vehicle raised. There is a risk
of injury.
Do not change wheels on uphill or downhill
gradients. Notify a qualified specialist work-
shop.
!Only position the jack on the jacking points
intended for this purpose. You could other-
wise damage the vehicle.
Changing wheels263
Wheels and tires
Z

Observe the following when raising the vehicle:
RWhen raising the vehicle, only use the jack
which Mercedes-Benz has specifically
approved for your vehicle.
RThe vehicle's jack is intended only to raise the
vehicle for a short time when changing a
wheel. It is not suited for performing mainte-
nance work under the vehicle.
RAvoid changing the wheel on uphill and down-
hill slopes.
RBefore raising the vehicle, secure it from roll-
ing away by applying the parking brake and
inserting wheel chocks. Never disengage the
parking brake while the vehicle is raised.
RThe jack must be placed on a firm, flat and
non-slip surface. On a loose surface, a large,
load-bearing underlay must be used. On a
slippery surface, a non-slip underlay must be
used, e.g. rubber mats.
RMake sure that the distance between the
underside of the tires and the ground does not
exceed 1.2 in(3 cm).
RNever place your hands or feet under the
raised vehicle.
RNever lie under the raised vehicle.
RNever start the engine when the vehicle is
raised.
RNever open or close a door when the vehicle
is raised.
RMake sure that no persons are present in the
vehicle when the vehicle is raised.
!Only use the jack pump lever middle rod and
the rod with the largest diameter as a lug
wrench extension. Only slide the middle rod
as far as it will go onto the lug wrench. The
rods may otherwise bend and be distorted to
such an extent that they can no longer be
used as a pump lever for the jack.
!Do not place the jack on the leaf spring or
the differential case.
Hydraulic jack
Preparing the hydraulic jack
XInsert the third rod of jack pump lever :into
the lug wrench extension.
Jack pump lever :is assembled.
XClose pressure release screw ;.
XTo do this, use the flattened section on pump
lever:to turn pressure release screw ;
clockwise to the stop.
iDo not turn pressure release screw ;more
than 1 or 2 full turns. Hydraulic fluid could
otherwise escape.
XInsert pump lever :into the recess on the
jack and secure by turning it clockwise.
XPlace the jack vertically beneath the jacking
points described below.
Jacking point, front axle
XPlace the jack under the jacking point in front of the front axle.
XVehicles with all-wheel drive: unscrew jack
spindle =counter-clockwise as far as it will
go.
264Changing wheels
Wheels and tires