2017 MERCEDES-BENZ SLC window

ECO start/stop function During automatic engine switch-off ,t he climate
control system only operate satar educed capa-
city. If you require full climate control capacity,
th eE CO start/sto pf unction can be deactivated
by pressin gt he ECO button ( Y
page 119).
Operating th ec limat ec ontrol sys-
tems
Activating/deactivatin gc limat ec on-
trol
General notes When th ec limate control is switched off ,t he air
supply and air circulation are also switched off.
The windows coul df og up. Therefore, switch off
climate control only briefly
i Activate climate control primarily usin gt he
X butto n( Y
page 108).
Air-conditioning system X
Turn th eS ma rtKey to position 2 in th ei gnition
loc k( Y
page 115).X
To switch on: tur na irflow control k clock-
wise to th ed esired position (excep tp osition
0 )( Y
page 103).X
To switch off: tur na irflow control k coun-
ter-clockwise to position 0 ( Y
page 103).
3-zone automatic climat ec ontrolX
Turn th eS ma rtKey to position 2 in th ei gnition
loc k( Y
page 115).X
To switch on: pres st he X button.
The indicator lamp in the X button lights
up. Airflow and air distribution are set to auto-
matic mode.
or X
Press the x button.
The indicator lamp in the x button goes
out .T he previously selecte ds ettings are
restored. X
To switch off: pres st he x button.
The indicator lamp in the x button lights
up. Switching cooling with air dehumidi-
fication on/off
General notes If you deactivate th e" Coolin gw ith air-dehumid-
ification" function ,t he air inside th ev ehicle will
no tbec ooled. The air inside th ev ehicle will also
no tbed ehumidified. The windows can fog up
mor eq uickly. Therefore, deactivate th ec ooling
with air-dehumidification function only briefly.
The "Coolin gw ith air dehumidification "f unction
is only availabl ew hen th ee ngine is running. The
air inside th ev ehicle is cooled and dehumidified
according to th et em peratur es elected.
Condensation may drip from th eu ndersid eo f
th ev ehicle when it is in cooling mode. This is
normal and no tas ign that there is am alfunc-
tion.
Activating/deactivating X
To activate: pres st he Z or V button.
The indicator lamp in the Z or V button
light su p. X
To deactivate: pres st he Z or V but-
ton.
The indicator lamp in the Z or V button
goes out .T he "Coolin gw ith air dehumidifica-
tion" function has ad elayed switch-off fea-
ture.Operating th ec limate control systems 107
Climate control

Problems with the "Cooling with air dehumidification" function Problem
Possible causes/consequences and P Solutions
The indicator lamp in the
Z or V button
flashes three times or
remains off. The "Cool-
ing with air dehumidifi-
cation" function cannot
be switched on. Cooling with air dehumidification has been deactivated due to am al-
function. X
Visit aq ualified specialist workshop.
Setting climate control to automatic
General notes Automatic mode is only available with dual-zone
automatic air conditioning.
In automatic mode, the set temperature is main-
tained automatically at ac onstant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
The automatic mode functions optimally when
the "Cooling with air dehumidification" function
is activated. If necessary, cooling with air dehu-
midification can be deactivated.
If you deactivate the "Cooling with air-dehumid-
ification" function, the air inside the vehicle will
not be cooled. The air inside the vehicle will also
not be dehumidified .T he windows can fog up
more quickly. Therefore, deactivate the cooling
with air-dehumidification function only briefly.
Automatic control X
Turn the SmartKey to position 2 in the ignition
lock ( Y
page 115).X
Set the desired temperature. X
To activate: press the X button.
The indicator lamp in the X button lights
up. Automatic air distribution and airflow are
activated. X
To switch to manua lm ode: press the

The climate control system switches to the
following functions: R
high airflow R
high temperature R
air distribution to the windshield and front
side windows R
air-recirculation mode off X
To switch off: press the d button.
The indicator lamp in the d button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or X
3-zone automatic climate control: press the
X button.
The indicator lamp in the d button goes
out. Airflow and air distribution are set to
automatic mode.
MAX COOL maximum cooling The MAX COOL function is only availabl einv ehi-
cles for the USA.
MAX COOL is only operational when the engine
is running. X
To activate: press the

Problems with the rear window defroster Problem
Possible causes/consequences and P Solutions
The indicator lamp on
the l button flashes.
The rear window
defroster has deactiva-
ted prematurely or can-
not be activated. The on-board voltage is too low because too many electrical consum-
ers are switched on. X
Switch off any consumers that are not required, e.g. reading lamps,
interior lighting or the seat heating.
When the battery is sufficiently charged, the rear window defroster
can be activated again.
The roof is open. X
Close the roof.
When the roof is closed, the rear window defroster can be activated
again.
Switching air-recirculation mode
on/off
General notes If you switch on air-recirculation mode, the win-
dows can fog up more quickly, in particular at
low temperatures. Only use air-recirculation
mode briefly to prevent the windows from fog-
ging up.
Switching on/off X
Turn the SmartKey to position 2 in the ignition
lock ( Y
page 115).X
To switch on: press the r button.
The indicator lamp in the r button lights
up.
i Air-recirculation mode is automatically acti-
vated at high levels of pollution (dual-zone
automatic climate control only) or at high out-
side temperatures. When air-recirculation
mode is activated automatically, the indicator
lamp in the r button is not lit. Outside air
is added after about 30 minutes. X
To switch off: press the r button.
The indicator lamp in the r button goes
out. i Air-recirculation mode deactivates auto-
matically: R
after approximately five minutes at outside
temperatures below approximately 41 ‡
(5 †) R
after approximately five minutes if cooling
with air dehumidification is deactivated R
after approximately 30 minutes at outside
temperatures above approximately 41 ‡
(5 †) if the "Cooling with air dehumidifica-
tion" function is activated
Switching the residual heat on or off
General notes The residual heat function is only available on
vehicles for Canada.
It is possible to make use of the residual heat of
the engine to continue heating the stationary
vehicle for up to 30 minutesafter the engine has
been switched off. The heating time depends on
the set interior temperature.
Activating/deactivating X
Turn the SmartKey to position 0 in the ignition
lock or remove it ( Y
page 115).X
To activate: press the K or V button.
The indicator lamp in the K or V button
lights up.
i The blower will run at al ow speed regardless
of the airflow setting.Operating the climate control systems 111
Climat ec ontrol

i If you activate the residual heat function at
high temperatures, only the ventilation wil lb e
activated. The blower runs at mediu ms peed.X
To deactivate: press the K or V but-
ton.
The indicator lamp in the K or V button
goes out.
Residua lh eat is deactivated automatically:R
after approximately 30 minutes R
when the ignition is switched on R
if the battery voltage drops
Setting the air vents
Important safety notes
G WARNING
Very hot or very cold air can flow from the air
vents. This could resul tinb urns or frostbite in
the immediate vicinity of the air vents. There
is ar isk of injury.
Make sure that all vehicle occupants always
maintain as ufficient distance to the air out-
lets. If necessary ,r edirect the airflow to
another area of the vehicle interior.
G WARNING
When AIRSCARF is switched on, very hot air
can flow from the vents in the head restraints.
This could resul tinb urns in the immediate
vicinity of the air vents. There is ar isk of injury.
Reduce the heater outpu tb efore it becomes
too hot.
In order to ensure the direct flow of fresh air
through the air vents into the vehicle interior,
please observe the following notes: R
keep the air inlet grill eont he hood and in the
engine compartment on the front-passenger
side free of blockages, such as ice, snow or
leaves. R
never cover the air vents or air intake grilles in
the vehicle interior.
i You can move the adjusters for the air vents
verticall yorh orizontally to set the direction of
the airflow. i For optimal climate control in the vehicle,
open the air vents completely and set the
adjusters to the central position.
Setting the center air vents X
To open the center air vents: turn the
adjuster in one of center air vents C counter-
clockwise. X
To close the center air vents: turn the
adjuster in one of center air vents C clock-
wise until it engages.
Setting the side air vents
C
Side window defroster vent
D
Side air vent X
To open as ide air vent: turn the adjuster in
the side air vent D to the left.X
To close as ide air vent: turn the adjuster in
the side air vent D to the right until it
engages.112
Setting the air vents
Climate control

Drivin gonw et road s
Hydroplaning If water has accumulated to ac ertai nd ept ho n
th er oa ds urface, there is ad anger of hydro-
planin go cc urring, eve ni f:R
you drive at low speeds R
th et ir es hav ea dequat et re ad dept h
Fo rt hi sr eason ,int he event of heav yr ain or in
condition sinw hic hh ydroplaning may occur ,
you mus td rive in th ef ol lowin gm anner:R
lowe ry our speedR
avoid rut sR
avoid sudden steerin gm ov ementsR
brake carefully
Drivin gonf looded road s
! Do no td rive through floode da reas. Chec k
th ed ept hofa ny water befor ed rivin gt hrou gh
it .D ri ve slowly through standin gw ater. Oth-
erwise ,w ater may ente rt he vehicle interio ro r
th ee ng in ec om partment. Thi sc an damage
th ee lectronic component sint he engin eo r
th ea utomatic transmission. Water can also
be drawn in by th ee ng ine's air suction nozzles
and this can cause engin ed amage.
Winte rd ri vin g
G WARNING
If you shift down on as lipper yr oa ds urfac ei n
an attempt to increase th ee ng ine's braking
effect ,t he drive wheels could los et he ir grip.
There is an increase dd anger of skidding and
accidents .
Do no ts hift down fo ra dditional engin eb rak-
in gonas lipper yr oa ds urface.
G DANGER
If th ee xh aus tp ipe is blocke dora dequat e
ventilation is no tp ossible, poisonous gases
suc hasc arbon monoxide (CO) may ente rt he
vehicle. Thi sist he case, e.g. if th ev ehicle
becomes trappe dins no w. There is ar is ko f
fatal injury. If you leav et he engin eort he auxiliar yh eatin g
running ,m ak es ur et he exhaus tp ipe and are a
around th ev ehicle are clear of snow. To
ensur eana dequat es upply of fresh air, ope na
window on th es id eoft he vehicle that is no t
facin gi nt ot he wind.
Hav ey our vehicle winter-proofed at aq ualified
specialis tw orkshop at th eo ns et of winter.
Drive particularly carefully on slipper yr oa ds ur -
faces. Avoid sudden acceleration ,s te erin ga nd
braking maneuvers .Don ot use cruise control.
If th ev ehicle threatens to skid or canno tb e
stopped when movin gatl ow speed:X
Shift th et ra nsmissio ntop osition N .
The outsid et em perature indicator is no t
designed to serve as an ice-warnin gd evic ea nd
is therefore unsuitable fo rt ha tp urpose.
Changes in th eo utsid et em perature are dis -
playe da fter as hort delay.
Indicated temperature sj us ta bov et he freezin g
poin tdon ot guarantee that th er oa ds urfac ei s
free of ice. The road may still be icy, especially in
wooded areas or on bridges. The vehicle could
skid if you fail to adapt your drivin gs ty le. Always
adapt your drivin gs ty le and drive at as peed to
suit th ep revailin gw eather conditions.
You should pay spe cia l attention to road condi-
ti on sw hen temperature sa re around freezin g
point.
Fo rm or ei nformati on on drivin gw it hs no w
chains, see ( Y
page 257).
Fo rm or ei nformat ion on drivin gw it hs ummer
tires ,s ee ( Y
page 257).
Observ et he note sint he "Winte ro peration "s ec -
tion ( Y
page 257).
Drivin gs ystems
Cruis ec ontro l
General notes
Cruise contro lm aintain sac onstan tr oa ds peed
fo ry ou. It brake sa utomatically in order to avoid
exceedin gt he set speed. On lon ga nd steep
downhill gradients, especially if th ev ehicle is
laden, you mus ts elec tal owe rg ear in goo dt im e.
By doin gs o, you will mak eu se of th eb raking
effect of th ee ng ine. Thi sr elieves th el oad on th e138
Driving systems
Driving an dp arking

Display messages
Possible causes/consequences and P Solutions
Y Open/Clos eV ario-
Roo fC ompletel y The roo fisn ot locked.X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions.X
Push or pull and hold th er oo fs witch until th er oo fisf ull yo pen or
closed ( Y
page 76) .
Y Start Engine See
Operator' sM anual The on-boar dv oltag eist oo low.X
Start th ee ng ine.X
Afte ra pproximately te ns econds, repeat th eo pening or closin g
procedure ( Y
page 76).
The roo fh as been opened and closed several times in ar ow .T he roo f
drive has been switched off automatically for safet yr easons.
You can open and close th er oo fa gain after approximately te n
minutes. X
Switc ho ff th ei gnition and tur nitb ac ko n.X
Repeat th eo pening or closin gp rocedure ( Y
page 76).
Close Rea r Sid e Win ‐
dow s You leav et he vehicl ea nd at least on er ear side window is open .X
Clos et he side windows ( Y
page 73).

! Make sure that: R
the side windows and the roof are com-
pletely closed R
the climate control blower is switched off R
the windshiel dw iper switch is at position 0
The vehicle could otherwise be damaged.
You can wash the vehicle in an automatic car
wash from the very start.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off wax
from the windshiel da nd the wiper blades. This
will prevent smears and reduce wiping noises
caused by residue on the windshield.
Washing by hand In some countries, washing by hand is only
allowed at speciall ye quipped washing bays.
Observe the legal requirements in each country. X
Do not use hot water and do not wash the
vehicle in direct sunlight. X
Use as oft sponge to clean.X
Use am ild cleaning agent, such as ac ar
shampoo approved by Mercedes-Benz. X
Thoroughly hose down the vehicle with ag en-
tle jet of water. X
Do not point the water jet directly towards the
air inlet. X
Use plenty of water and rinse out the sponge
frequently. X
Rinse the vehicle with clean water and dry
thoroughly with ac hamois.X
Do not let the cleaning agent dry on the paint-
work.
Carefully remove all deposits of road salt as
soon as possible when driving in winter.
Powe rw ashers
G WARNING
The water jet from ac ircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nent sd amage dint his way may fail unexpect-
edly .T here is ar isk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged tires or chassis component sr eplaced imme-
diately.
! Alway sm aintain ad istance of at least
11.8 in (30 cm) between the vehicle and the
power washer nozzle. Information abou tt he
correct distance is available from the equip-
ment manufacturer.
Move the power washer nozzle around when
cleaning your vehicle.
Do not aim directly at any of the following: R
Tires R
Door gaps, roof gaps, joints, etc. R
Soft top (Designo retractable hardtop) R
Electrical components R
Battery R
Connectors R
Lights R
Seals R
Trim R
Ventilation slots
Damaged seals or electrical component sc an
lead to leaks or failures.
! Do not use high-pressure cleaners if the
tank recess is open while you clean it. This
can cause damage to the seals or other com-
ponents.
Cleaning the paintwork
! Do not affix: R
stickers R
films R
magnetic plates or simila ri tems
to painted surfaces. You could otherwise
damage the paintwork.
Scratches, corrosive deposits, areas affected by
corrosion and damage caused by inadequate
care cannot always be completely repaired. In
such cases, visit aq ualified specialist workshop. X
Remove dirt immediately ,w here possible,
while avoiding rubbing too hard. X
Soak insect remains with insect remover and
rinse off the treated areas afterwards. X
Soak bird droppings with water and rinse off
the treated areas afterwards. X
Remove coolant, brake fluid, tree resin, oils,
fuels and greases by rubbing gently with a Care 237
Maintenance and care Z