2017 MERCEDES-BENZ SLC light

cloth soaked in petroleum ethe rorl ig hter
fluid. X
Use tar remover to remove tar stains. X
Use silicone remover to remove wax.
If water no longer forms "beads" on the paint
surface ,u se the paint care products recommen-
ded and approved by Mercedes-Benz. Thi sist he
case approximately every three to five months,
depending on the climate conditions and the
care product used.
If dirt ha sp enetrate dt he paint surface or if the
paint ha sb ecome dull ,t he paint cleane rr ecom-
mended and approved by Mercedes-Benz
shoul dbeu se d.
Do not us et hese care products in the su noro n
the hoo dw hile the hoo dish ot.X
Use as ui tabl et ouch-up stick, e.g. MB Touch-
Up Stick, to repai rs light damag etot he paint-
work quickl ya nd provisionally.
Matte finish care
! Neve rp olish the vehicle or the light alloy
wheels. Polishing causes the finish to shine.
! The following may cause the paint to
become shiny and thus reduce the matte
effect: R
strong rubbing of the paintwork with
unsuitabl em aterialsR
frequent us eofa ut omatic car washesR
washing the vehicle in direct sunlight
! Neve ru se paint cleaner, buffing or polishing
products, or gloss preserver, e.g. wax. These
products are only suitabl ef or high-gloss sur-
faces. Their us eonv ehicle sw it hm atte finish
lead stoc onsiderable surface damag e( shiny,
mottle da reas).
Alway sh av ep ai ntwork repairs carrie do ut at a
qualified specialist workshop.
! Do not us ew as hp rograms with ah ot wax
treatment under any circumstances.
Observe these notes if your vehicle ha sac lear
matte finish. Thi sw il lh el py ou to avoid damage
to the paintwork du etoi ncorrect treatment.
These notes also appl ytol ig ht alloy wheel sw it h
ac lear matte finish.
i The vehicle shoul dp referabl ybew as he db y
hand using as oft sponge, car shampo oa nd
plenty of water. i Use only insect remover and car shampoo
from the rang eofr ecommended and
approved Mercedes-Benz care products.
Cleanin gt he vehicle parts
Cleanin gt he Designo retractable hard-
top
! Whe nc leaning the Designo retractable
hardtop ,u nder no circumstances use: R
Gasoline R
Thinners R
Ta rors tai nr emover R
Other organic solvents
! Remove bird droppings immediately, as
they are corrosiv ea nd can therefore cause
damag etot he Designo retractable hardtop.
Do not clean the vehicle using ap ower
washer. Do not us es harp-edge de quipment
to remove ice and snow. X
Light soiling: yo uc an clean the Designo
retractable hardtop while it is dry or rinse it
with clean water. X
Normal to heav ys oili ng: clean the Designo
retractable hardtop with ab rush and clean
water. Clea ns tains and othe rd ir tw it hab rush
and soft top cleaning agents that have been
recommended and approved by Mercedes-
Benz. Alway sb rush from front to back, fol-
lowing the grain of the fabric.
Frequent cleaning reduce st he Designo retract-
able hardtop's dirt resistance.
To restore these properties ,c lean the Designo
retractable hardtop using roof cleaning agents
that have bee nr ecommended and approved by
Mercedes-Benz.
i If yo up la ntol ea ve the vehicle outsid ef or a
long period of time ,p la ce as ui tabl ec over
over the Designo retractable hardtop.
Cleanin gt he wheels
G WARNING
The water jet from ac ircula rj et nozzle (dirt
blasters) can cause invisible exterior damage
to the tire sorc hassi sc omponents. Compo-
nents damaged in this wa ym ay fai lu nexpect-
edly. There is ar is kofana ccident.238
Care
Maintenanc ea nd care

Do not us ep ower washers with circular jet
nozzles to clean the vehicle. Hav ed amaged
tire sorc hassi sc omponents replaced imme-
diately.
! Do not us ea cidi cw heel cleaning products
to remove brake dust. Thi sc ould damage
whee lb ol ts and brake components.
! Do not park your vehicl ef or al on gp er io do f
time directl ya ft er cleaning, particularly after
cleaning the whee lr im with whee lc leaner.
Whee lc leane rc an lead to the increased cor-
rosio noft he brake discs and pads .T herefore,
drive for af ew minute sa ft er cleaning. By
heating up the brakes ,t he brake discs and
pads dry .T he vehicl ec an the nb ep ar ked for a
long perio doft ime.
Cleanin gt he windows
G WARNING
Yo uc ould become trapped by the windshield
wipers if the ys tart moving whil ec leaning the
windshiel dorw iper blades. There is ar is ko f
injury.
Alway ss wi tch off the windshiel dw iper sa nd
the ignition befor ec leaning the windshiel do r
wipe rb lade s.
! Do not us ed ry cloths, abrasive products,
solvents or cleaning agents containing sol-
vents to clean the insid eoft he windows .D o
not touch the insides of the windows with
hard objects ,e .g .ani ce scrape rorr ing. There
is otherwis ear is kofd amagin gt he windows.
! Clea nt he water drainage channel soft he
windshiel da nd the rea rw in do watr egular
intervals .D eposits such as leaves, petal sa nd
pollen ma yu nder certain circumstances pre-
vent water fro md raining away .T hi sc an lead
to corrosion damage and damage to elec-
troni cc omponents.X
Clea nt he insid ea nd outside of the windows
with ad am pc loth and ac leaning product that
is recommende da nd approved by Mercedes-
Benz. Cleanin gw ip er blades
G WARNING
Yo uc ould become trapped by the windshield
wipers if the ys tart moving whil ec leaning the
windshiel dorw iper blades. There is ar is ko f
injury.
Alway ss wi tch off the windshiel dw iper sa nd
the ignition befor ec leaning the windshiel do r
wipe rb lade s.
! Do not pull the wipe rb lade .O therwise, the
wipe rb lade could be damaged.
! Do not clean wipe rb lade st oo ofte na nd do
not ru bt he mt oo hard. Otherwise, the graph-
ite coating could be damaged. Thi sc ould
cause wipe rn oise.
! Hol dt he wipe ra rm securel yw he nf olding
back. The windshiel dc ould be damage dift he
wipe ra rm smacks against it suddenly. X
Fol dt he windshiel dw iper arms away fro mt he
windshield. X
Carefully clean the wipe rb lade sw it had am p
cloth. X
Fol dt he windshiel dw iper arms back again
befor es wi tching on the ignition.
Cleanin gt he exterior lighting
! Onl yu se cleaning agents or cleaning cloths
which ar es ui tabl ef or plastic light lenses.
Unsuitabl ec leaning agents or cleaning cloths
could scratch or damage the plastic light len-
ses. X
Clea nt he plastic lense soft he exterio rl ig hts
with aw et spong ea nd am il dc leaning agent,
e.g .M er cedes-Benz car shampo oorc leaning
cloths.
Cleanin gt he mirro rt urn signals
! Onl yu se cleaning agents or cleaning cloths
tha ta re suitabl ef or plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lense soft he
mirror tur ns ig nals. X
Clea nt he plastic lense soft he mirror tur ns ig -
nal sint he exterio rm irror housing using aw et
spong ea nd mil dc leaning agent, e.g.Care 239
Maintenance and care Z

X
Pull the tire sealant bottle out of the tire infla-
tion compressor.
The filler hose remains attached to the tire
sealant bottle. X
Drive to the nearest qualified specialist work-
shop and have the tire changed there. X
Have the tire sealant bottle and the filler hose
replaced as soon as possible at aq ualified
specialist workshop. X
Have the tire sealant bottle replaced every
four years at aq ualified specialist workshop.
Battery (vehicle)
Important safety notes Special tools and expert knowledge are required
when working on the battery, e.g. removal and
installation .Y ou should therefore have all work
involvin gt he battery carried out at aq ualified
specialist workshop.
G WARNING
Work carried out incorrectly on the battery
can lead, for example, to as hort circuit and
thus damage the vehicle electronics. This can
lead to function restriction sa pplying to
safety-relevant systems, e.g the lighting sys-
tem, the ABS (anti-loc kb raking system) or the
ESP ®
(Electronic Stability Program). The oper-
ating safety of your vehicle may be restricted.
You could lose control of the vehicle, for
example: R
when braking R
in the event of abrupt steerin gm aneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
There is ar isk of an accident.
In the event of as hort circuit or as imilar inci-
dent, contact aq ualified specialist workshop
immediately. Do not drive any further .Y ou
should have all work involvin gt he battery car-
ried out at aq ualified specialist workshop.
For further information about ABS and ESP ®
,
see ( Y
page 55) and ( Y
page 58). G WARNING
Electrostatic build-up can lead to the creation
of sparks, which could ignite the highly explo-
sive gases of ab attery. There is ar isk of an
explosion.
Before handling the battery, touch the vehicle
body to remove any existin ge lectrostatic
build-up.
The highly flammable gas mixture forms when
charging the battery as well as when jump-start-
ing.
Always make sure that neither you nor the bat-
tery is electrostatically charged. Ab uild-up of
electrostatic charge can be caused, for exam-
ple: R
by wearing clothin gm ade from synthetic
fibers R
due to friction between clothin ga nd seatsR
if you push or pull the battery across the car-
pet or other synthetic materials R
if you wipe the battery with ac loth
G WARNING
During the charging process, ab attery produ-
ces hydrogen gas. If as hort circuit occurs or
sparks are created, the hydrogen gas can
ignite. There is ar isk of an explosion. R
Make sure that the positive terminal of a
connected battery does not come into con-
tact with vehicle parts. R
Never place metal object sort ools on ab at-
tery. R
It is importan tt hat you observe the descri-
bed order of the battery terminals when
connectin ga nd disconnectin gab attery.R
When jump-starting, make sure that the
battery poles with identical polarity are
connected. R
It is particularly importan ttoo bserve the
described order when connectin ga nd dis-
connectin gt he jumper cables. R
Never connect or disconnect the battery
terminals while the engine is running.
G WARNING
Battery acid is caustic. There is ar isk of injury.246
Battery (vehicle)
Breakdown assistance

The vehicle will then use very little energy, thus
conserving battery power.
If the power supply has been interrupted, e.g. if
you reconnect the battery, you will have to: R
reset the function for automatically folding
the exterior mirrors in/out by folding the mir-
rors out once ( Y
page 89)R
set the clock (see the Digital Operator's Man-
ual)
On vehicles with am ultimedia system, the
time is set automatically.
Charging the battery
G WARNING
During charging and jump-starting, explosive
gases can escape from the battery. There is a
risk of an explosion.
Particularly avoid fire, open flames, creating
sparks and smoking. Ensure there is sufficient
ventilation while charging and jump-starting.
Do not lean over ab attery.
G WARNING
Battery acid is caustic. There is ar isk of injury.
Avoid contact with skin, eyes or clothing. Do
not inhale any battery gases. Do not lean over
the battery. Keep children away from batter-
ies. Wash away battery acid immediately with
plenty of clean water and seek medical atten-
tion.
G WARNING
Ad ischarged battery can freeze at tempera-
tures below freezin gp oint. When jump-start-
ing the vehicle or charging the battery, gases
can escape from the battery. There is ar isk of
an explosion.
Allow the frozen battery to thaw out before
charging it or jump-starting.
! Only use battery chargers with am aximum
charging voltage of 14.8 V.
! Only charge the battery using the jump-
starting connection point.
The jump-starting connection point is in the
engine compartment. If the indicator/warning lamps do not light up at
low temperatures, it is very likely that the dis-
charged battery has frozen. In this case, you
may neither charge the battery nor jump-start
the vehicle. The service life of at hawed-out bat-
tery may be shorter .T he starting characteristics
can be impaired, particularly at low tempera-
tures. Have the thawed-out battery checked at a
qualified specialist workshop.
Read the battery charger's operating instruc-
tions before charging the battery. X
Open the hood. X
Connec tt he battery charger to the positive
terminal and ground point in the same order
as when connectin gt he donor battery in the
jump-starting procedure ( Y
page 249).248
Battery (vehicle)
Breakdown assistance

Jump-starting For the jump-starting procedure, use only the jump-starting connection point in the engine com-
partment ,c onsisting of ap ositive terminal and ag round point.
G WARNING
Battery acid is caustic. There is ar isk of injury.
Avoid contact with skin, eyes or clothing. Do not inhale any battery gases. Do not lean over the
battery. Keep children away from batteries. Wash away battery acid immediately with plenty of
clean water and seek medical attention.
G WARNING
During charging and jump-starting, explosive gases can escape from the battery. There is ar isk
of an explosion.
Particularly avoid fire, open flames, creating sparks and smoking. Ensure there is sufficient ven-
tilation while charging and jump-starting. Do not lean over ab attery.
G WARNING
During the charging process, ab attery produces hydrogen gas. If as hort circuit occurs or sparks
are created, the hydrogen gas can ignite. There is ar isk of an explosion.R
Make sure that the positive terminal of ac onnected battery does not come into contact with
vehicle parts. R
Never place metal objects or tools on ab attery.R
It is important that you observe the described order of the battery terminals when connecting
and disconnecting ab attery.R
When jump-starting, make sure that the battery poles with identical polarity are connected. R
It is particularly important to observe the described order when connecting and disconnecting
the jumper cables. R
Never connect or disconnec tt he battery terminals while the engine is running.
G WARNING
Ad ischarged battery can freeze at temperatures below freezing point. When jump-starting the
vehicle or charging the battery, gases can escape from the battery. There is ar isk of an explosion.
Allow the frozen battery to thaw out before charging it or jump-starting.
! Avoid repeated and lengthy starting attempts. Otherwise, the catalytic converter could be
damaged by the non-combusted fuel.
If the indicator/warning lamps do not light up at low temperatures, it is very likely that the dis-
charged battery has frozen .Int his case, you may neither charge the battery nor jump-start the
vehicle. The service life of at hawed-out battery may be shorter. The starting characteristic sc an be
impaired, particularly at low temperatures. Have the thawed-out battery checked at aq ualified
specialist workshop. Jump-starting 249
Breakdown assistance Z

Do not start the vehicl eu si ng ar apid charging device. If your vehicle's battery is discharged, the
engine can be jump-started fro ma nothe rv ehicl eorf ro mas econd battery using jumpe rc ables.
Observe the following points: R
The battery is not accessible in al lv ehicles. If the othe rv ehicle's battery is not accessible ,j ump-
start the vehicl eu si ng as econd battery or aj ump-starting device.R
Yo um ay onl yj ump-star tt he vehicl ew he nt he engine and exhaust system ar ec old.R
Do not start the engine if the battery is frozen. Let the battery tha wf irst.R
Onl yj ump-star tf ro mb at teries with a12Vv oltag er at ing.R
Onl yu se jumpe rc able sw hi ch have as uf ficient cross-sectio na nd insulate dt ermina lc lamps.R
If the battery is full yd is charged, leav et he battery tha ti sb ei ng used to jump-star tc onnected for
af ew minute sb ef or ea ttempting to start. Thi sc harge st he battery slightly.R
Make sure tha tt he two vehicles do not touch.
Make sure that: R
The jumpe rc able sa re not damaged.R
Bar ep ar ts of the termina lc lamp do not come into contact with othe rm eta lp ar ts whil et he jumper
cable sa re connected to the battery.R
The jumpe rc able sc anno tc ome into contact with parts which can mov ew he n t he engine is
running ,s uc hast he V-bel tp ulle yort he fan.X
Secure the vehicl ebya pplyin gt he electri cp ar kin gb rake.X
Shift the transmission to position P .X
Make sure tha tt he ignition is switched off .A ll indicator lamps in the instrument cluster must be
off .W he nu si ng the SmartKey, tur nt he SmartKe ytop osit ion 0 in the ignition lock and remove it
( Y
page 115).X
Switch off al le le ctrical consumers ,e .g .r ea rw in do wd ef roster ,l ig hting, etc.X
Open the hood.
Positio nn umber

Tire and Loadin gI nfor matio np lacard
C
Recommended tire pressures
The Tire and Loading Informatio np la card is on
the B-pillar on the driver's side ( Y
page 265).
The Tire and Loading Informatio np la card con-
tains the recommende dt ire pressures for cold
tires. The recommende dt ire pressures ar ev alid
for the maximum permissibl el oa da nd up to the
maximum permissibl ev ehicl es peed.
Tire pressure table The tire pressure table is on the insid eoft he fuel
fille rf lap. It shows the tire pressure for al lt ires
permitted at the factory for thi sv ehicle; see
illustratio n( ex ample).
The tire pressure table contains the recommen-
de dp ressures for col dt ire sf or various operat-
ing conditions, i.e .d if ferin gl oa da nd spee dc on-
ditions.
If at ire size precedes at ire pressure, the fol-
lowing tire pressure informatio ni so nl yv alid for
tha tt ire size; see illustratio n( ex ample). The load conditions "partiall yl aden "a nd "fully
laden" ar ed ef ine dint he table for different num-
bers of occupants and amounts of luggage .T he
actual numbe rofs eats ma yd if fer.
Some tire pressure table ss ho wo nl yt he rim
diameters instea doft he full tire size, e.g. R18 .
Ri md iame te risp ar toft he tire size and can be
found on the tire sidewall ( Y
page 269).
If the tire pressures have been set to the lower
values for lighte rl oads and/or lowe rr oad
speeds ,t he pressures shoul dber eset to the
highe rv alues : R
if yo uw an ttod rive with an increased load
and/or R
if yo uw an ttod rive at highe rr oa ds peeds
The tire pressures for increased load sa nd/or
highe rr oa ds peeds, shown in the tire pressure
table ,m ay have an egative effect on driving
comfort.
If the tire pressure is not set correctly, thi sc an
lead to an excessive buil dupofh ea ta nd as ud -
de nl os sofp ressure.
For mor ei nformation, contact aq uali fied spe-
cialist workshop. Tire pressure 259
Wheel sa nd tires Z

Important safety notes
G WARNIN G
Eac ht ir e, includin gt he spar e( if provided),
should be checke datl east once am onth
when cold and inflated to th ep ressur er ec -
ommended by th ev ehicl em anufacturer on
th eT ir ea nd Loading Information placard on
th ed river' sd oor B-pillar or th et ir ep ressur e
label on th ei nside of th ef uel filler flap .Ify our
vehicl eh as tires of ad ifferen ts iz et ha nt he
siz ei ndicated on th eT ir ea nd Loading Infor -
mation placard or th et ir ep ressur el abel, you
should determine th ep roper tire pressur ef or
those tires .
As an added safet yf eature, your vehicl eh as
been equipped wit hat ir ep ressur em onitoring
system (TPMS) that illuminate sal ow tire pres-
sur et el ltale when on eorm or eofy our tires
are significantly underinflated. Accordingly,
when th el ow tire pressur et el ltale illuminates,
you should stop and chec ky our tires as soo n
as possible ,a nd inflat et he mtot he proper
pressure. Drivin gonas ignificantly underin-
flated tire causes th et ir etoo verheat and can
lead to tire failure. Underinflation also
reduce sf uel efficiency and tire tread life ,a nd
may affec tt he vehicle's handlin ga nd stop-
pin ga bility.
Pleas en ot et ha tt he TPM Sisn ot as ubstitut e
for proper tire maintenance ,a nd it is th ed riv -
er'
sr e sponsibilit y t om aintai nc orrect tire
pressure, eve nifu nderinflation has no t
reached th el evel to trigge ri llumination of th e
TPM Sl ow tire pressur et el ltale.
Your vehicl eh as also been equipped wit ha
TPM Sm alfunction indicator to indicat eift he
system is no to perating properly. The TPM S
malfunction indicator is combined wit ht he
low tire pressur et el ltale. When th es ystem
detects am alfunction ,t he warning lamp will
flas hf or approximately am inute and then
remain continuously illuminated. This
sequenc ew ill be repeated every time th ev ehi-
cle is started as lon gast he malfunction
exists. When th em alfunction indicator is illuminated,
th es ystem may no tbea ble to detec tors ignal
low tire pressur easi ntended. TPM Sm alfunc -
tion sm ay occur for av ariet yofr easons,
includin gt he installation of incompatible
replacemen tora lternate tires or wheels on
th ev ehicl et ha tp reven tt he TPM Sf ro mf unc-
tioning properly. Always chec kt he TPM Sm al-
function telltale after replacing on eorm or e
tires or wheels on your vehicl etoe ns ur et ha t
th er eplacemen tora lternate tires and wheels
allow th eT PM Stoc ontin ue to function prop-
erly.
It is th ed river' sr esponsibilit yt os et th et ir e
pressur etot ha tr ecommended for cold tires
whic hiss uitable for th eo perating situation
( Y
page 258). Not et ha tt he correc tt ir ep ressur e
for th ec urren to perating situation must first be
taught-in to th et ir ep ressur em onitor. If there is
as ubstantial loss of pressure, th ew arning
threshold for th ew arning message is aligned to
th er eferenc ev alue st aught-in .R estart th et ir e
pressur em onitor after adjusting th ep ressur eo f
th ec ol dt ir es ( Y
page 264). The curren tp res-
sures are saved as ne wr eferenc ev alues. As a
result ,aw arning message will appear if th et ir e
pressur ed rops sign ifica ntly.
T he tire pressur em onitor does no tw arn you of
an incorrectl ys et tire pressure. Observ et he
note sont he recommended tire pressur e
( Y
page 258).
The tire pressur em onitor is no ta ble to warn you
of as udde nl oss of pressure, e.g. if th et ir ei s
penetrated by af oreign object. In th ee vent of a
sudde nl oss of pressure, brin gt he vehicl etoa
halt by braking carefully. Avoid abrup ts te ering
movements.
The tire pressur em onitor has ay ellow warning
lamp in th ei nstrumen tc luste rf or indicating
pressur el oss or am alfunction .W hether th e
warning lamp flashes or lights up indicates
whether at ir ep ressur eist oo low or th et ir e
pressur em onitor is malfunctioning :R
if th ew arning lamp is lit continuously, th et ir e
pressur eono ne or mor et ir es is significantly
to ol ow. The tire pressur em onitor is no tm al-
functioning . R
if th ew arning lamp flashes for aroun da
minute and then remain sl it constantly, th e
tire pressur em onitor is malfunctioning .Tire pressure 263
Wheels and tires Z