2017 MERCEDES-BENZ METRIS charging

[x] Cancel search: charging

Page 7 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual Display messages (vehicle with-
out steering wheel buttons) ........... 200
Function/notes ............................. 150
ATTENTION ASSIST
see ATTENTION ASSIST
Audio 10
Important safety notes .....

Page 99 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual Hazard warning lamp switch
XTo switch on/off:press the£hazard
warning lamp switch.
If you have indicated a turn while the hazard
warning lamps are switched on, only the turn
signal lamps on the side

Page 137 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual Switching off the engine
Important safety notes
GWARNING
The automatic transmission switches to neu-
tral position Nwhen you switch off the engine.
The vehicle may roll away. There is a risk of an
acc

Page 239 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual GPS reception
Correct functioning of the navigation system
depends, amongst other aspects, on GPS recep-
tion. In certain situations, GPS reception may be
impaired, there may be interference or there

Page 260 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual Rfrequent operation in mountainous terrain or
on poor road surfaces
Rleaving the engine idling for long periods on a
frequent basis
In these or similar operating conditions, have
the air filter, engin

Page 261 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual Comply with the foll owing safety precautions
and take protective measures when handlin g
batteries.
Risk of explos ion. Explosive oxyhy-
drogen isproduced when batteries
are bein g charge d.Only char

Page 263 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual XRemove breather hose? from th eto pof th e
battery.
XPull th ebattery out of th eseat base until th e
negative clam pcan be release dand removed.
XDisconnect th enegative clam pfrom negative
termina

Page 264 of 318

MERCEDES-BENZ METRIS 2017  MY17 Operator’s Manual the side of the battery housing in the connec-
tion area.
XPlace the positive clamp cover on positive
terminal:.
XFold both handles =down onto the battery.
XPush the battery into the seat base until t
Page:   1-8 9-16 next >