2017 MERCEDES-BENZ GLC SUV key

[x] Cancel search: key

Page 130 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual Activating/deactivating
XTurn theSmartKey to position 2in th eigni-
tion loc k (Ypage 132).
XTo activate: press rockerswitch gup or
down .
The indicator lamp abov erocke rswitch g
lights up.
Air-recir

Page 134 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual !Do not warm up the engine with the vehicle
stationary. Drive off immediately. Avoid high
engine speeds and driving at full throttle until
the engine has reached its operating temper- ature.
Only shif

Page 135 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual Key positions withthe Start/S topbutton
:Start/Sto pbutto n
;Ignition loc k
As soo nas th eignition is switched on ,all th e
indicator lamps in th einstrumen tcluste rligh t
up. Warning and indicator

Page 136 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual GWARNING
Flammable materials introduced through
environmental influence or by animals can
ignite if in contact with the exhaust system or
parts of the engine that heat up. There is a risk
of fire.
Car

Page 137 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual You can execute a maximum of two consecutive
starting attempts via your smartphone. If you
press the start/stop button or insert the Smart-
Key into the ignition lock, you can carry out two
more start

Page 138 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual To ensure that you do not roll backwards when
pulling away on an uphill slope, engage the elec-
tric parking brake.
XPress and hold handle:.
The electric parking brake continues to brake
and prevent t

Page 140 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual All othermodelsXTo deacti vate:press ECO butto n:.
Indicato rlamp ;goes out .
XTo activate:press ECO butto n:.
Indicato rlamp ;light sup.
If indicator lamp ;is off ,th eECO start/sto p
function has be

Page 141 of 374

MERCEDES-BENZ GLC SUV 2017 X253 Owners Manual ProblemPossible causes/consequences andMSolutions
The starter motor was exposed to a thermal load that was too high.
XTry to start the engine again (Ypage 133).
If the engine still does not start:
XCo