2017 MERCEDES-BENZ C-Class SEDAN park assist

X
Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Automatic Locking
Automatic Locking: turn and
press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the locking
feature in the vehicle Operator's Manual. Setting the switch-off delay time
Interior lighting switch-off delay time The interior lighting is activated for the duration
of the switch-off delay time when the SmartKey
is removed from the ignition lock.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Interior Lighting Delayed
Interior Lighting Delayed
Switch-off Switch-off: turn and press the controller.
The setting element is active.
X To change the delayed switch-off time: turn
and press the controller.
You can find further information on the interior
lighting in the vehicle Operator's Manual.
Exterior lighting switch-off delay time If you switch on the
Exterior Lighting Exterior Lighting
Delayed Switch-off
Delayed Switch-off function, the exterior
lighting is switched on for a short time after the engine is switched off. The light switch must beset to 0058; see the vehicle Operator's Manual.
The exterior lighting remains on for 60 seconds after the engine is switched off. If you close all
the doors and the tailgate, the exterior lighting
switches off after the set time.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Exterior Lighting Delayed
Exterior Lighting Delayed
Switch-off Switch-off: turn and press the controller.
The setting element is active.
X To change the delayed switch-off time: turn
and press the controller. Activating/deactivating the trunk lid
opening height restriction
Activating the Trunk Opening-height
Trunk Opening-height
Restriction Restriction function allows you to avoid
bumping the trunk lid on a low garage ceiling, for
example. Setting via the multimedia system is
available for the Sedan and Coupe. X
Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Trunk Opening-height
Trunk Opening-height
Restriction
Restriction: turn and press the controller.
The function switches on or off, depending on
the previous setting. 360° camera
General notes
The 360° camera covers the immediate sur-
roundings of the vehicle and assists you, for
instance when parking or at exits with reduced
visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. Make sure
that no persons or animals are in the maneu-
vering range.
For more information on the 360° camera see
the vehicle Operator's Manual. Displaying the 360° camera image
The 360° camera image can be displayed if:
R your vehicle is equipped with a 360° camera
R the 360°
360° Camera Camera function is switched on (see
the vehicle Operator's Manual)
X Press the 00D4button.
or X Press Vehicle
Vehicle in the main function bar.
The vehicle menu is displayed.
X To select 360° Camera
360° Camera : turn and press the
controller.
The 360° camera image appears in split
screen mode.
You will see the previous view on the display if,
when the function is switched on:
R you turn the SmartKey to position 1in the
ignition lock
R you select transmission position P
R when you are driving at moderate speeds
Switching the display off manually
X To select 0039: slide 6and press the con-
troller. 46
360° cameraVehicle functions

Switching the display on automatically
X You can automatically switch the 360° Cam-
era display using reverse gear (Y page 47).Switching automatic mode of the
360° camera on/off
This function activates the 360° camera when
reverse gear is engaged.
X Press the 00D4button.
or X Press Vehicle Vehicle in the main function bar.
The vehicle menu is displayed.
X To switch to the menu bar:slide 6the
controller.
X To select System Settings
System Settings: turn and press
the controller.
X To select 360° Camera
360° Camera: turn and press the
controller.
The menu 360° Camera
360° Camera appears.
X Select Activation by R gear Activation by R gear.
The function is switched on 0073or off 0053,
depending on the previous status. Opening the camera cover for clean-
ing
X To select Open Camera Cover
Open Camera Cover in the 360°
camera menu: turn the controller and press to confirm.
The Please Wait...
Please Wait... message appears for
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
R the ignition is switched off
R the vehicle exceeds a moderate speed Rear view camera
General notes
The rear view camera covers the immediate sur- roundings behind the vehicle and assists you
when parking.
The rear view camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. When maneu- vering or parking, make sure that there are no
persons, animals or objects in the area in which
you are maneuvering.
You can find further information about the rear
view camera in the vehicle Operator's Manual. Switching automatic mode of the rear
view camera on/off
This function activates the rear view camera
when reverse gear is engaged.
X Press the 00D4button.
or X Press Vehicle Vehicle in the main function bar.
The vehicle menu is displayed.
X Slide 6the controller.
X To select System Settings
System Settings: turn and press
the controller.
X Select Rear View Camera
Rear View Camera.
X Select Activation by R gear
Activation by R gear.
The function is switched on 0073or off 0053,
depending on the previous status.
When you start the vehicle and engage
reverse gear, the camera cover opens auto-
matically if the function is activated. The area
behind the vehicle is shown with guide lines in the display; see the vehicle Operator's Man-
ual.
For further information on the rear view camera;
see the vehicle Operator's Manual. Object detection
The rear view camera can detect moving and
stationary objects. If, for example, a pedestrian or another vehicle is detected, these objects are
marked with bars. The system is able to detect
and mark stationary objects when your vehicle
is moving. Moving objects will always be detec- ted and marked.
Switching object detection on/off
X To select Object ObjectDetection
Detection in the rear view
camera menu: turn and press the controller.
The function is switched on 0073or off 0053,
depending on the previous status. Rear view camera
47Vehicle functions Z