2017 MERCEDES-BENZ C-Class SEDAN light

X
Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Ambient Light: Display
Ambient Light: Display: turn
and press the controller.
The function switches on or off, depending on
the previous setting.
i The brightness can be adjusted using the
controller on the rotary light switch.
You can find further information on the interior
lighting in the vehicle Operator's Manual. Setting the easy entry and exit feature
This function makes getting in and out of your
vehicle easier.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Easy Entry/Exit
Easy Entry/Exit: turn and press
the controller.
The setting element is active.
X To change the setting: press the controller.
You can find further information on the easy
entry and exit feature in the vehicle Operator's
Manual. Activating/deactivating the acoustic
locking verification signal
You can also set an audible signal to confirm
that the vehicle has been locked.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Acoustic Lock Feedback
Acoustic Lock Feedback: turn
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the locking
feature in the vehicle Operator's Manual. Switching the seat belt adjustment
on/off
The Belt Belt Adjustment
Adjustment function adjusts the driv-
er's and front-passenger seat belt to the upper
body of the occupants.
X Call up Vehicle Settings Vehicle Settings (Ypage 44).
X To select Belt Adjustment
Belt Adjustment: turn and press
the controller.
The function switches on or off, depending on
the previous setting. You can find further information on seat belt
adjustment in the vehicle Operator's Manual. Switching the automatic mirror fold-
ing function on/off
When the Automatic Mirror Folding Automatic Mirror Folding func-
tion is activated, the outside mirrors fold in auto-
matically as soon as you lock the vehicle from
the outside. The outside mirrors fold out auto-
matically again as soon as you unlock the vehi-
cle.
X Call up Vehicle Settings Vehicle Settings (Ypage 44).
X To select Automatic Mirror Folding
Automatic Mirror Folding : turn
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the auto-
matic folding mirror function in the vehicle Oper- ator's Manual. Switching locator lighting on/off
If you switch on the Locator Lighting Locator Lighting func-
tion, the exterior lighting is switched on for a
short time when it is dark. The light switch must be set to 0058; see the vehicle Operator's Man-
ual.
The exterior lighting remains on for 40 seconds after the vehicle is unlocked. When you start the
engine, the locator lighting is switched off and
the automatic driving lights are activated.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Locator Locator Lighting
Lighting : turn and press
the controller.
X Press the controller.
The function is switched on or off, depending
on the previous status.
You can find further information on the locator
lighting in the vehicle Operator's Manual. Activating/deactivating the auto-
matic door locking mechanism
The vehicle is locked automatically when the
ignition is switched on and the vehicle is travel-
ing faster than walking pace. Vehicle settings
45Vehicle functions Z

X
Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Automatic Locking
Automatic Locking: turn and
press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the locking
feature in the vehicle Operator's Manual. Setting the switch-off delay time
Interior lighting switch-off delay time The interior lighting is activated for the duration
of the switch-off delay time when the SmartKey
is removed from the ignition lock.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Interior Lighting Delayed
Interior Lighting Delayed
Switch-off Switch-off: turn and press the controller.
The setting element is active.
X To change the delayed switch-off time: turn
and press the controller.
You can find further information on the interior
lighting in the vehicle Operator's Manual.
Exterior lighting switch-off delay time If you switch on the
Exterior Lighting Exterior Lighting
Delayed Switch-off
Delayed Switch-off function, the exterior
lighting is switched on for a short time after the engine is switched off. The light switch must beset to 0058; see the vehicle Operator's Manual.
The exterior lighting remains on for 60 seconds after the engine is switched off. If you close all
the doors and the tailgate, the exterior lighting
switches off after the set time.
X Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Exterior Lighting Delayed
Exterior Lighting Delayed
Switch-off Switch-off: turn and press the controller.
The setting element is active.
X To change the delayed switch-off time: turn
and press the controller. Activating/deactivating the trunk lid
opening height restriction
Activating the Trunk Opening-height
Trunk Opening-height
Restriction Restriction function allows you to avoid
bumping the trunk lid on a low garage ceiling, for
example. Setting via the multimedia system is
available for the Sedan and Coupe. X
Call up Vehicle Settings
Vehicle Settings (Ypage 44).
X To select Trunk Opening-height
Trunk Opening-height
Restriction
Restriction: turn and press the controller.
The function switches on or off, depending on
the previous setting. 360° camera
General notes
The 360° camera covers the immediate sur-
roundings of the vehicle and assists you, for
instance when parking or at exits with reduced
visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. Make sure
that no persons or animals are in the maneu-
vering range.
For more information on the 360° camera see
the vehicle Operator's Manual. Displaying the 360° camera image
The 360° camera image can be displayed if:
R your vehicle is equipped with a 360° camera
R the 360°
360° Camera Camera function is switched on (see
the vehicle Operator's Manual)
X Press the 00D4button.
or X Press Vehicle
Vehicle in the main function bar.
The vehicle menu is displayed.
X To select 360° Camera
360° Camera : turn and press the
controller.
The 360° camera image appears in split
screen mode.
You will see the previous view on the display if,
when the function is switched on:
R you turn the SmartKey to position 1in the
ignition lock
R you select transmission position P
R when you are driving at moderate speeds
Switching the display off manually
X To select 0039: slide 6and press the con-
troller. 46
360° cameraVehicle functions

R
Transmission
R Sports exhaust system
R Electronic Stability Program ESP ®
There may be fewer settings or set values, or
none, depending on your vehicle's equipment.
For further information on the Individual drive
program; see the vehicle Operator's Manual. Configuration via the DYNAMIC
SELECT switch
X Use the DYNAMIC SELECT switch to select
the Individual drive program; see the vehicle
Operator's Manual.
A window appears after a short while.
X To confirm Adjust
Adjust: press the controller.
The Individual Configuration Individual Configuration menu for
setting the drive program appears.
X To select Drive
Drive, Suspension
Suspension, Steering
Steering,
Climate Control
Climate Control orEco Start/Stop
Eco Start/Stop
Function
Function: turn and press the controller.
X Select individual settings.
The menu symbol, text and image show the
selected setting.
In Mercedes-AMG vehicles, you can configure
the settings of the drive system, suspension,
transmission, sports exhaust system and Elec-
tronic Stability Program ESP ®
. Displaying vehicle data
X Press the 00D4button.
or X Press Vehicle Vehicle in the main function bar.
The vehicle menu is displayed.
X To select DYNAMIC SELECT
DYNAMIC SELECT: turn and press
the controller.
The Individual
Individual Configuration Configuration, Vehicle
Vehicle
Data
Data andEngine Data
Engine Data menus appear.
X Select Vehicle Data
Vehicle Data.
Updates of the following data are displayed:
R Road type analogous to the selected drive
program
R G-force display of longitudinal and lateral
acceleration
R Accelerator and brake pedal activity
R Activity of the suspension struts R
Wheel angle
R Overrun mode animation
The G-force display is not available in all of the
drive programs.
Daytime or night-time view is shown depending
on the automatic light sensor. Displaying engine data
X Press Vehicle Vehicle in the main function bar.
The vehicle menu is displayed.
X To select DYNAMIC SELECT
DYNAMIC SELECT: turn and press
the controller.
The Individual Individual Configuration
Configuration, Vehicle
Vehicle
Data
Data andEngine Data
Engine Data menus appear.
X Select Engine Data
Engine Data.
The following current data is displayed:
R Engine output
R Engine torque
R Engine oil temperature
R On-board electrical system voltage
i The values for engine output and engine tor-
que may deviate from the nominal values.
Items that can influence this are, for example:
R Engine speed
R Sea level
R Fuel grade
R Outside temperature
In Mercedes-AMG vehicles you will see current
data on the transmission oil temperature
instead of the on-board electrical system volt-
age. Setting options
You can choose from the following settings for
the drive: C Comfort
S Sport
S+ Sport +
M Manual
E EcoDYNAMIC SELECT
51Vehicle functions Z

Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual. Introduction
Important safety notes
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi- cle while driving, you will be distracted from
traffic conditions. You could also lose control of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for the country in which you are currently driving whenoperating the multimedia system.
The multimedia system calculates the route to
the destination without taking the following into
account, for example:
R traffic lights
R stop and yield signs
R merging lanes
R parking or stopping in a no parking/no stop-
ping zone
R other road and traffic rules and regulations
R narrow bridges
The multimedia system may give incorrect nav-
igation commands if the actual street/traffic
situation does not correspond with the digital
map's data. For example, a route may have been
diverted or the direction of a one-way street may have changed. For this reason, you must always observe road
and traffic rules and regulations during your
journey. Road and traffic rules and regulations
always have priority over the system's driving
recommendations.
Navigation announcements are intended to
direct you while driving without diverting your
attention from the road and driving.
Please always use this feature instead of con-
sulting the map display for directions. Looking
at the icons or map display can distract you from traffic conditions and driving, and increase the
risk of an accident. General notes
Operational readiness of the navigation system The navigation system must determine the posi-
tion of the vehicle before first use or whenever
operational status is restored. Therefore, you
may have to drive for a while before precise
route guidance is possible.
GPS reception Among other things, correct functioning of the
navigation system depends on GPS reception. In
certain situations, GPS reception may be
impaired, there may be interference or there
may be no reception at all, e.g. in tunnels or
parking garages.
i Using roof carriers may impair the correct
functioning of a roof antenna (phone, satellite
radio, GPS).
Entry restriction For vehicles in certain countries, there is a data
entry restriction.
The restriction is active from a vehicle speed of
above approximately 3 mph (5 km/h).As soon
as the speed falls below approximately 2 mph
(3 km/h), the restriction becomes inactive.
When the restriction is active, certain entries
cannot be made. Menu items are shown in gray and cannot be selected.
For example:
R entering the destination city and street
R entering a destination via the map Introduction
53Navigation Z

R
entering POIs in the vicinity of a city or via a
name search
R editing entries
Other entries are possible, such as entering
points of interest in the vicinity of the destina-
tion or current position. Switching to navigation mode
0043
Traffic reports can be received or traffic
reports are available
X Press the 00CBbutton.
If route guidance is active, the map is shown
in full-screen mode. The map shows the vehi- cle's current position.
If no route guidance is active, the menu is also
displayed. Destination
Destination is highlighted.
Access from one of the other main functions: X To activate the menu: slide5the con-
troller (e.g. in radio mode).
X To select Navi
Navi: turn and press the controller.
The navigation menu appears.
X Press the controller.
The map shows the vehicle's current position.
Access within navigation:
X From any menu, press the 00CBbutton.
The navigation menu appears.
X Press the controller. Showing/hiding the menu
Using the menu, you can make a destination
entry or select the navigation settings, for exam-
ple. X
To show: slide6the controller when the
map appears.
or X Swipe down the touchpad with one finger.
If there has been no route calculated, Des‐
Des‐
tination tination is marked.
If a route has been calculated, 008Fis
marked. X
To hide: press the 0038button.
or X Slide 5the controller.
Full screen symbol 0043appears.
X Press the controller. Moving the map
Requirement: the map is in full screen mode, the
menu is faded out (Y page 54).
X Press the controller.
The crosshair is shown.
X Slide 1, 4or2 the controller.
The map moves in the corresponding direc-
tion under the crosshair.
i Enter a destination using the map
(Y page 64). 54
IntroductionNavigation

Basic settings
Selecting the route type
X
To switch to navigation mode: press the
00BE button.
X To show the menu: slide6the controller.
X To select Options
Options: turn and press the con-
troller.
X Select Route Settings
Route Settings.
X Select a route type.
A filled circle indicates the current selection.
R Active route guidance: the multimedia sys-
tem calculates a new route.
R Inactive route guidance: the multimedia
system uses the selection as the new set-
ting.
i Route guidance active: a destination has
been entered and the route has been calcu-
lated.
Route guidance inactive: no destination has
been entered yet and no route has been cal-
culated yet. Fast Fast
Route
Route The multimedia system cal-
culates a route with a short
travel time.
Dynamic Dynamic
Traffic Traffic
Route Route Based on the
Fast Route
Fast Route
route type and includes traf-
fic reports on the route for the
route guidance. Eco Route Eco Route The multimedia system cal-
culates an economical route.
The journey may take slightly
longer compared to taking
the fast route. Short Short
Route Route The multimedia system cal-
culates a short distance
route. The
Dynamic Traffic Route Dynamic Traffic Route route type uses
real-time traffic reports from SIRIUS satellite
radio.
Further Information on real-time traffic reports
(Y page 77).
X To calculate alternative routes: select
Calculate Alternative Routes Calculate Alternative Routes .
Switch the function on 0073or off 0053.
Function activated: after each route calcula-
tion, route alternatives are offered that cor-
respond to the local conditions (Y page 75).
If desired, you can have the multimedia sys-
tem calculate alternative routes even during
route guidance (Y page 75). Setting route options
X
To avoid/use route options: selectAvoid Avoid
Options
Options.
A menu appears.
X Select one of the options.
0073: using or avoiding route options is enabled
0053: using or avoiding route options is disabled
R Menu item Avoid Area Avoid Area (Ypage 85)
The multimedia system enables you to avoid
areas you do not wish to drive through.
R Menu item Avoid Highways Avoid Highways
R Menu item Avoid Ferries
Avoid Ferries
R Menu item Avoid Auto Trains
Avoid Auto Trains
R Menu item Avoid Tunnels
Avoid Tunnels
R Menu item Avoid Unpaved Roads
Avoid Unpaved Roads
The function is not available in all countries.
R Menu item Use Toll Roads
Use Toll Roads
The route calculation includes roads which
require you to pay a usage fee (toll).
R Menu item Use Carpool Lanes Use Carpool Lanes
If your vehicle meets the access conditions
for carpool lanes, you can use this function. Basic settings
55Navigation Z

X
Enter the first few letters of the city and
street, e.g. NEW NEWandEMP
EMP.
While entering the information, the number of exact matches/all hits is shown.
---/--- ---/--- is displayed if fewer than three char-
acters have been entered.
999+
999+ is displayed if there are too many hits.
X Select the 0054symbol.
The search results are displayed
(Y page 60).
Selecting search results The search results are divided into categories,
such as addresses. The number of exact/total
hits is shown in brackets.
Further search results are displayed, if POI
POI
Search Search and/orFuzzy Search
Fuzzy Search are activated in
the search options (Y page 60).X
To select Addresses
Addresses : press the controller.
The search results are displayed.
Exact hits are shown at the very top of the list.
Hits are listed alphabetically. The search term
that you entered is highlighted in orange in the
entries. X Select an entry: turn and press the controller.
The address entry menu appears, showing the destination address.
X To start route calculation: selectStart
Start .X
To select a POI: selectPOIs POIsin
inthe
the Vicin‐
Vicin‐
ity
ity orAll POIs
All POIs by turning and pressing the
controller.
A list appears. The search results are dis-
played according to the linear distance, start-
ing with those closest.
X Select a POI.
The POI is shown.
X To start route calculation: select Start
Start .
X To use online search: selectOnline Online
Search Search by turning and pressing the control-
ler.
The search switches to the online functions.
Online search requirement (USA): mbrace
must be activated for Internet access
(Y page 120).
Requirement for the online map display (Can-
ada): a mobile phone is connected to the mul-
timedia system via Bluetooth ®
(Y page 92)
or USB (Y page 157).
Selecting search options X
To switch to navigation mode: press the
00BE button.
X To show the menu: slide6the controller.
X To select Destination Destination: turn and press the
controller.
X Select Keyword Search
Keyword Search .
X To select Search Options
Search Options: slide 5, turn
and press the controller.
X Select Fuzzy Search
Fuzzy Search orPOI Search
POI Search .
Switch the setting on 0073or off 0053.
The error-tolerant search is useful if parts of
the address are incomplete or the spelling is
unclear.
The POI search takes into account points of
interest in the search.
Selecting a state/province X
To switch to navigation mode: press the
00BE button.
X To show the menu: slide6the controller.
X To select Destination Destination: turn and press the
controller.
X Select Keyword Search
Keyword Search .60
Destina
tion entryNavigation

Selection Step
From POIs
From POIs X
Select a point of interest
(Y page 61). Using Map
Using Map X
Enter a destination using
the map (Y page 64). From Memory
From Memory
Card Card X
Select a personal POI
(Y page 69). From From
Mercedes- Mercedes-
Benz Apps Benz Apps X
Enter a destination from
Mercedes-Benz Apps
(Y page 66). Using Geo- Using Geo-
Coordinates Coordinates X
Enter a destination using
the geo-coordinates
(Y page 67). X
To select a POI: turn the controller and press
to confirm.
After selecting a POI or entering a destination,
the address of the intermediate destination is
displayed.
After the destination is entered via the map,
the address is displayed. Start
Start is highlighted. X
To call up a map: selectMap Mapby turning and
pressing the controller.
You can move the map and select the desti-
nation.
X To make a call: selectCall Call.
If the intermediate destination has a tele-
phone number and a mobile phone is con-
nected to the multimedia system
(Y page 92), the call is connected.
X To load data from the Internet: selectwww www.
If an Internet address is available, data is loa- ded from the Internet.
X To store an intermediate destination in
the destination memory:
selectSave Save
(Y page 80).
X To accept an intermediate destination:
select
Start Start by pressing the controller.
The destination is entered in the intermediate
destinations menu.
If Calculate Alternative Routes Calculate Alternative Routes is acti-
vated (Y page 55), instead of Start
Start, menu
point Continue
Continue is available.
X To enter another intermediate destina-
tion:
slide5the controller and highlight
Add New: Add New:.
X Press the controller.
X Proceed as described above.
Editing intermediate destinations You can perform the following functions:
R
change intermediate destinations
R switch the sequence of the intermediate des-
tinations in the intermediate destinations
menu
R delete intermediate destinations
i You cannot edit POIs. Destination entry
65Navigation Z