2017 MAZDA MODEL MX-5 RF instrument panel

4–14 6
When Driving
Tyre Pressure Monitoring System
System Error Activation
When the TPMS warning light À ashes,
there may be a system malfunction.
Consult an Authorised Mazda Dealer.
A system error activation may occur in the
following cases:
 


 When there is equipment or a device
near the vehicle using the same radio
frequency as that of the tyre pressure
sensors.
 


 When a metallic device such as a non-
genuine navigation system is equipped
near the centre of the instrument panel,
which may block radio signals from the
tyre pressure sensor to the receiver unit.
 


 When using the following devices in the
vehicle that may cause radio interference
with the receiver unit.
 

 
 A digital device such as a personal
computer.
 

 
 A current converter device such as a
DC-AC converter.
 


 When excess snow or ice adheres to the
vehicle, especially around the wheels.
 


 When the tyre pressure sensor batteries
are exhausted.
 


 When using a wheel with no tyre
pressure sensor installed.
 


 When using tyres with steel wire
reinforcement in the side walls.
 


 When using tyre chains.
Tyres and Wheels
CAUTION
When inspecting or adjusting the tyre air
pressures, do not apply excessive force
to the stem part of the wheel unit. The
stem part could be damaged.
Changing tyres and wheels
The following procedure allows the TPMS
to recognise a tyre pressure sensor's
unique ID signal code whenever tyres or
wheels are changed, such as changing to
and from winter tyres.
NOTE
Each tyre pressure sensor has a unique
ID signal code. The signal code must be
registered with the TPMS before it can
work. The easiest way to do it is to have
an Authorised Mazda Dealer change
your tyre and complete ID signal code
registration.
When having tyres changed at an
Authorised Mazda Dealer
When an Authorised Mazda Dealer
changes your vehicle's tyres, they will
complete the tyre pressure sensor ID signal
code registration.
When changing tyres yourself
If you or someone else changes tyres, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.
/:A(.'',A'FKVKQPKPFD

5–4
Interior Features
Air-Conditioning System
Selecting the AirÀ ow Mode
Instrument panel Vents
Instrument panel and Floor Vents
Floor VentsDefroster and Floor Vents
Defroster Vents
/:A(.'',A'FKVKQPKPFD

6–50
Maintenance and Care
Owner Maintenance
Fuse Panel Description
Fuse block (Engine compartment)
DESCRIPTION FUSE
RATING PROTECTED COMPONENT
1 ENG IG3 5 A —
2 ENG IG2 5 A —
3 HORN2 7.5 A Horn
4 C/U IG1 15 A For protection of various circuits
5 ENG IG1 7.5 A Engine control system
6 — — —
7 INTERIOR 15 A Overhead light
8
ENG
B 7.5 A Engine control system
9 AUDIO2 15 A Audio system
10 METER1 10 A Instrument cluster
11 SRS1 7.5 A Air bag
12 — — —
13 RADIO 7.5 A Audio system
14 ENGINE3 20 A Engine control system
15 ENGINE1 10 A Engine control system
16 ENGINE2 15 A Engine control system
17 AUDIO1 25 A Audio system
/:A(.'',A'FKVKQPKPFD

6–66
Maintenance and Care
Appearance Care
Plastic Part Maintenance
CAUTION
Do not use polishing agents.
Depending on the product ingredients,
they could cause discolouration, stains,
cracks or peeling of the coating.
Instrument Panel Top
Maintenance
1. Wipe the soiled area with a soft
cloth soaked in a mild detergent
(approx. 5%) diluted with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
Panel Maintenance
If a panel becomes soiled, wipe it off with
a soft cloth soaked in clean water and
thoroughly wrung out.
If some areas require further cleaning, use
the following procedure:
1. Wipe the soiled area with a soft
cloth soaked in a mild detergent
(approx. 5 %) diluted with water.
2. Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
NOTE
Be particularly careful when cleaning
shiny surface panels and metallic parts
such as plating as they can be scratched
easily.
Cleaning the Window Interiors
If the windows become covered with an
oily, greasy, or waxy ¿ lm, clean them with
glass cleaner. Follow the directions on the
container.
CAUTION
  Do not scrape or scratch the inside of
the window glass. It could damage
the thermal ¿ laments.

 When washing the inside of the
window glass, use a soft cloth
dampened in lukewarm water, gently
wiping the thermal ¿ laments.
 Use of glass cleaning products could
damage the thermal ¿ laments.
/:A(.'',A'FKVKQPKPFD

9–2
Speci¿ cations
Identi¿ cation Numbers
Vehicle Information
Labels
Vehicle Identi¿ cation Number
(South Africa, Arab Gulf
Cooperation Council)
The vehicle identi¿ cation number legally
identi¿ es your vehicle. The number is on
a plate attached to the cowl panel located
on the left corner of the instrument panel.
This plate can easily be seen through the
windscreen.
Model Plate
Chassis Number/Vehicle
Identi¿ cation Number (Ireland,
U.K.)
Chassis Number
Open the cover shown in the ¿ gure to
check the chassis number.
Vehicle Identi¿ cation Number
/:A(.'',A'FKVKQPKPFD

10–5
Index
I
i-ACTIVSENSE ................................ 4-100
Adaptive Front Lighting System
(AFS) ........................................... 4-102
Adjustable speed limiter .............. 4-122
Blind Spot Monitoring (BSM) .... 4-112
Camera and sensors ..................... 4-100
Forward Sensing Camera (FSC) ... 4-129
High Beam Control System
(HBC) .......................................... 4-103
Lane Departure Warning System
(LDWS) ....................................... 4-106
Radar sensors (rear)..................... 4-132
Rear Cross Traf¿ c Alert (RCTA) ... 4-119
i-ELOOP ............................................. 4-90
Control status display .................... 4-92
i-ELOOP indicator light ................ 4-92
i-stop ................................................... 4-13
i-stop OFF switch .......................... 4-21
Indicator light (Green)................... 4-18
Vehicle roll prevention function .... 4-22
Warning light (Amber) .................. 4-18
i-stop warning beep ............................. 7-52
If a Warning Light Turns On or
Flashes................................................. 7-31
Ignition
Switch .............................................. 4-4
Ignition Not Switched Off (STOP)
Warning Beep ...................................... 7-51
Illuminated Entry System ................. 5-124
Immobilizer System ............................ 3-53
Indicator Lights ................................... 4-45
Low engine coolant temperature ... 4-47
Wrench .......................................... 4-47
Inspecting Brake/Clutch Fluid Level ... 6-22
Inspecting Coolant Level .................... 6-20
Inspecting Engine Oil Level ............... 6-20
Inspecting Washer Fluid Level............ 6-23
Instrument Cluster ............................... 4-24
Instrument Panel Illumination ............. 4-28 Interior Care ........................................ 6-64
Cleaning the window interiors ...... 6-66
Instrument panel top maintenance ... 6-66
Leather upholstery maintenance ... 6-65
Panel maintenance ......................... 6-66
Plastic part maintenance ................ 6-66
Seat belt maintenance .................... 6-64
Upholstery maintenance ................ 6-65
Vinyl upholstery maintenance ....... 6-65
Interior Lights
Boot light ..................................... 5-123
Overhead light ............................. 5-123

J
Jack ....................................................... 7-6
Jump-Starting ...................................... 7-20
K
Key Left-in-boot Warning Beep (With the
advanced keyless function) ................. 7-52
Key Left-in-vehicle Warning Beep (With
the advanced keyless function) ........... 7-52
Key Removed from Vehicle Warning
Beep .................................................... 7-51
Key Suspend Function .......................... 3-8
Keyless Entry System ........................... 3-3
Keys ...................................................... 3-2
Key suspend function ...................... 3-8
Transmitter ...................................... 3-5
/:A(.'',A'FKVKQPKPFD