2017 MAZDA MODEL MX-5 RF seats

2–30
Essential Safety Equipment
Child Restraint
*Some models.
3. Remove the cover.
NOTE
Be careful not to lost the removed cover.
4. Place the child-restraint on the
passenger seat.
5. Pass the tether strap under the head
restraint and install it to the tether
anchor.
For the tether strap adjustment
method, refer to the child-restraint seat
manufacturer’s instructions.
Using the Seat Belt
CAUTION
When moving the seats forward and
rearward, make sure you hold onto
the seatback with your hand while
operating. If the seatback is not held, the
seat will move suddenly and could cause
injury.
When installing a child-restraint system,
follow the installation instructions
included with the product.
Also, open the convertible top and slide
the seat as far back as possible, fold down
the seatback as far as possible.
Using ISOFIX Anchor *
WARNING
Follow the manufacturer's instructions
for the use of the child-restraint
system:
An unsecured child-restraint system
is dangerous. In a sudden stop or a
collision it could move causing serious
injury or death to the child or other
occupants. Make sure any child-
restraint system is properly secured in
place according to the manufacturer's
instructions.
/:A(.'',A'FKVKQPKPFD

2–31
Essential Safety Equipment
Child Restraint
WARNING
Make sure the child-restraint system is
properly secured:
A child-restraint system that is not
secured is dangerous. In a sudden stop
or collision, it can become a projectile
and hit someone, causing serious
injury. When not in use, remove it from
the vehicle, put it in the boot or at least
make sure it is securely fastened to the
ISOFIX anchors.
Make sure there are no seat belts or
foreign objects near or around the
ISOFIX anchor-secured child-restraint
system:
Not following the child-restraint system
manufacturer's instructions when
installing the child-restraint system is
dangerous. If seat belts or a foreign
object prevent the child-restraint
system from being securely attached
to the ISOFIX anchors and the child-
restraint system is installed improperly,
the child-restraint system could move
in a sudden stop or collision causing
serious injury or death to the child or
other occupants. When installing the
child-restraint system, make sure there
are no seat belts or foreign objects
near or around the ISOFIX anchors.
Always follow the child-restraint system
manufacturer's instructions.
CAUTION
When moving the seats forward and
rearward, make sure you hold onto
the seatback with your hand while
operating. If the seatback is not held, the
seat will move suddenly and could cause
injury.
1. Open the convertible top.
2. Make sure the ignition is switched off.
3. Slide the passenger seat as far back as
possible (page 2-5 ).
*1
*1 You may need to move the seat
forward slightly and recline the
back of the seat, in order to assist in
the¿ tment of some child-restraint
systems.
4 . Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
5 . Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the ISOFIX
anchor.
/:A(.'',A'FKVKQPKPFD

2–35
Essential Safety Equipment
SRS Air Bags
WARNING
Do not sit too close to the driver and passenger air bags:
Sitting too close to the driver and passenger air bag modules or placing hands or feet
on them is extremely dangerous. The driver and passenger air bags inÀ ate with great
force and speed. Serious injuries could occur if someone is too close. The driver should
always hold onto only the rim of the steering wheel. The passenger should keep both
feet on the À oor. Seat occupants should adjust their seats as far back as possible and
always sit upright against the seatbacks with seat belts worn properly.
Do not sit too close to a door or lean against doors in vehicles with side air bags:
Sitting too close to the side air bag modules or placing hands on them is extremely
dangerous. A side air bag inÀ ates with great force and speed directly out of the outboard
shoulder of the seat and expands along the door on the side the car is hit. Serious injury
could occur if someone is sitting too close to the door or leaning against a window in
the seats. Furthermore, sleeping up against the door or hanging out the driver-side
window while driving could block the side air bag and eliminate the advantages of
supplementary protection. Give the side air bags room to work by sitting in the centre of
the seat while the vehicle is moving with seat belts worn properly.
Sit in the centre of the seat and wear seat belts properly:
Sitting too close to the side air bag modules or placing hands on them, or sleeping up
against the door or hanging out the windows is extremely dangerous. The side air bags
inÀ ate with great force and speed directly expanding along the door on the side the car
is hit. Serious injury could occur if someone is sitting too close to the door. Give the
side air bags room to work by sitting in the centre of the seat while the vehicle is moving
with seat belts worn properly.
Do not attach objects on or around the area where driver and passenger air bags
deploy:
Attaching an object to the driver and passenger air bag modules or placing something
in front of them is dangerous. In an accident, an object could interfere with air bag
inÀ ation and injure the occupants.
/:A(.'',A'FKVKQPKPFD

2–36
Essential Safety Equipment
SRS Air Bags
WARNING
Do not attach objects on or around the area where a side air bag deploys:
Attaching objects to the seat in such a way as to cover the outboard side of the seat in
any way is dangerous. In an accident the object could interfere with the side air bag,
which inÀ ates from the outboard side of the seats, impeding the added protection of the
side air bag system or redirecting the air bag in a way that is dangerous. Furthermore,
the bag could be cut open releasing the gas.
Do not hang net bags, map pouches or backpacks with side straps on the seats. Never
use seat covers on the seats. Always keep the side air bag modules in your seats free to
deploy in the event of a side collision.
Do not touch the components of the supplementary restraint system after the air bags
have inÀ ated:
Touching the components of the supplementary restraint system after the air bags have
inÀ ated is dangerous. Immediately after inÀ ation, they are very hot. You could get
burned.
Never install any front-end equipment to your vehicle:
Installation of front-end equipment, such as frontal protection bar (kangaroo bar,
bull bar, push bar, or other similar devices), snowplow, or winches, is dangerous. The
air bag crash sensor system could be affected. This could cause air bags to inÀ ate
unexpectedly, or it could prevent the air bags from inÀ ating during an accident.
Occupants could be seriously injured.
Do not modify the suspension:
Modifying the vehicle suspension is dangerous. If the vehicle's height or the suspension
is modi¿ ed, the vehicle will be unable to accurately detect a collision resulting in
incorrect or unexpected air bag deployment and the possibility of serious injuries.
Do not modify a door or leave any damage unrepaired. Always have an expert repairer,
we recommend an Authorised Mazda Repairer inspect a damaged door:
Modifying a door or leaving any damage unrepaired is dangerous. Each door has a
side crash sensor as a component of the supplementary restraint system. If holes are
drilled in a door, a door speaker is left removed, or a damaged door is left unrepaired,
the sensor could be adversely affected causing it to not detect the pressure of an impact
correctly during a side collision. If a sensor does not detect a side impact correctly, the
side air bags and the seat belt pretensioner may not operate normally which could result
in serious injury to occupants.
/:A(.'',A'FKVKQPKPFD

2–37
Essential Safety Equipment
SRS Air Bags
WARNING
Do not modify the supplementary restraint system:
Modifying the components or wiring of the supplementary restraint system is
dangerous. You could accidentally activate it or make it inoperable. Do not make any
modi¿ cations to the supplementary restraint system. This includes installing trim,
badges, or anything else over the air bag modules. It also includes installing extra
electrical equipment on or near system components or wiring. An expert repairer, we
recommend an Authorised Mazda Repairer can provide the special care needed in
the removal and installation of seats. It is important to protect the air bag wiring and
connections to assure that the bags do not accidentally deploy, and that the passenger
occupant classi¿ cation system and the seats retain an undamaged air bag connection.
Do not place luggage or other objects under the seats:
Placing luggage or other objects under the seats is dangerous. The components
essential to the supplementary restraint system could be damaged, and in the event of
a side collision, the appropriate air bags may not deploy, which could result in death
or serious injury. To prevent damage to the components essential to the supplementary
restraint system, do not place luggage or other objects under the seats.
Do not operate a vehicle with damaged air bag/seat belt pretensioner system
components:
Expended or damaged air bag/seat belt pretensioner system components must be
replaced after any collision which caused them to deploy or damage them. Only a
trained expert repairer, we recommend an Authorised Mazda Repairer can fully
evaluate these systems to see that they will work in any subsequent accident. Driving
with an expended or damaged air bag or pretensioner unit will not afford you the
necessary protection in the event of any subsequent accident which could result in
serious injury or death.
Do not remove interior air bag parts:
Removing any components such as the seats, front instrument panel, the steering wheel,
containing air bag parts or sensors is dangerous. These parts contain essential air bag
components. The air bag could accidentally activate and cause serious injuries. Always
have an Authorised Mazda Repairer remove these parts.
Properly dispose of the air bag system:
Improper disposal of an air bag or a vehicle with live air bags in it can be extremely
dangerous. Unless all safety procedures are followed, injury could result. Have an
expert repairer, we recommend an Authorised Mazda Repairer safely dispose of the air
bag system or scrap an air bag equipped vehicle.
/:A(.'',A'FKVKQPKPFD

2–50
Essential Safety Equipment
SRS Air Bags
WARNING
  Luggage or other items placed under the passenger seat or between the passenger
seat and driver seat that push up the passenger seat bottom.
  An object, such as a seat cushion, is put on the passenger's seat or between the
passenger's back and the seatback.
  A seat cover is put on the passenger's seat. 
 Luggage or other items are placed on the seat with the child in the child-restraint
system.
  The seat is washed. 
 Liquids are spilled on the seat. 
 The passenger seat is moved backward, pushing into luggage or other items placed
behind it.
  Luggage or other items are placed between the passenger seat and driver seat. 
 An electric device is put on the passenger's seat. 
 An additional electrical device, such as a seat warmer is installed to the surface of
the passenger seat.
The passenger front and side air bags and seat belt pretensioner systems will deactivate
if the passenger air bag deactivation OFF indicator light turns on.
CAUTION
  To assure proper deployment of the front air bag and to prevent damage to the sensor
in the seat cushion:
 


 Do not place sharp objects on the seat cushion or leave heavy luggage on them.



 Do not spill any liquids on the seats or under the seats.


 To allow the sensors to function properly, always perform the following:




 Adjust the seats as far back as possible and always sit upright against the seatbacks
with seat belts worn properly.
 


 If you place your child on the passenger seat, secure the child-restraint system
properly and slide the passenger seat as far back as possible within the position in
which the child-restraint system can be installed.
/:A(.'',A'FKVKQPKPFD

3–52
Before Driving
Convertible Top (Retractable Fastback)
Closing the Roof
1. Park on a hard, level surface off the
right-of-way and ¿ rmly set the parking
brake.
2. Put a vehicle with an automatic
transmission in Park (P), a manual
transmission in Neutral.
3. Apply the parking brake with the brake
pedal depressed.
4. Start the Engine.
NOTE
Do not open/close the roof with the
engine stopped. Otherwise the vehicle's
battery power could be depleted.
5. Slightly slide the seats back if they are
in the foremost position.
6. Continue pressing the retractable
fastback switch in the close direction
until the rear roof is completely closed.
NOTE
  If the retractable fastback switch
is pressed in the close direction, a
warning beep sounds.
  If the windows are closed, the
windows automatically open partially
when the rear roof opens.
 After the rear roof is closed and
the retractable fastback switch is
continuously pressed in the close
direction, the power windows close
completely.
 Once you remove your hand from
the switch, the power windows do
not close even if it is operated again.
If this happens, completely close
the power windows using the power
window switch.
  The roof keeps closing and the
operation indicator light À ashes
while the retractable fastback switch
is pressed in the close direction.
  If the switch is released while the
roof is closing, the roof stops closing.
If the switch is pressed in the close
direction again, the roof resumes
closing.
  When the operation is ¿ nished, a
beep sound is heard and the operation
indicator light turns off.
/:A(.'',A'FKVKQPKPFD

3–55
Before Driving
Security System
*Some models.
Theft-Deterrent System *
If the theft-deterrent system detects an
inappropriate entry into the vehicle or
the intrusion sensor detects movement
in the vehicle which could result in the
vehicle (with the intrusion sensor) or its
contents being stolen, the alarm alerts the
surrounding area of an abnormality by
sounding the siren/horn and À ashing the
hazard warning lights.
The system will not function unless it's
properly armed. So when you leave the
vehicle, follow the arming procedure
correctly.
Intrusion sensor
*
The intrusion sensor uses ultrasonic waves
to detect movement inside the vehicle and
to raise an alert of an intrusion into the
vehicle.
The intrusion sensor detects certain kinds
of movement inside the vehicle, however,
it may also respond to phenomenon
outside the vehicle such as vibrations, loud
noise, wind, and air currents.
CAUTION
In order for the intrusion sensor to
operate appropriately, be aware of the
following:
 
 Do not hang clothing or objects from
a head restraint.
  Return the sunvisors to their original
positions.
  Do not blind the intrusion sensor by
covering it or placing objects over it.
  Do not allow the intrusion sensor to
get soiled or wipe it with a liquid.
  Do not shock or cause an impact to
the intrusion sensor or the intrusion
sensor bezel.
  Do not install seats that are not
Mazda genuine products.
  To prevent obstruction of intrusion
sensor, do not place objects or cargo
near the intrusion sensor that are
higher than the head restraints.

Intrusion sensor and
intrusion sensor bezel
/:A(.'',A'FKVKQPKPFD