Page 166 of 664
4–22
When Driving
Instrument Cluster and Display
Odometer, Trip Meter and Trip Meter Selector
The odometer is constantly displayed on
the screen when the ignition is switched
ON, and the TRIP A or TRIP B screen
can be displayed by operating the INFO
switch.
Press the INFO switch INFO switch
Odometer,
Trip meter A
Odometer,
Trip meter B
Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The driving distance for a speci fi ed
interval is indicated. Two types (TRIP
A, TRIP B) of interval distance and the
average fuel economy for each can be
measured.
For instance, trip meter A can record the
distance from the point of origin, and
trip meter B can record the distance from
where the fuel tank is fi lled.
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
The trip meter and average fuel economy
can be reset by pressing the INFO switch
for 1.5 second or more while in each
mode.
NOTE
Only the trip meters record tenths of
kilometers (miles).
The trip record will be erased when: The power supply is interrupted
(blown fuse or the battery is
disconnected).
The vehicle is driven over 1999 km
(mile).
CX-5_8FN1-EA-16L_Edition1.indb 222016/12/12 10:05:44
Page 169 of 664
4–25
When Driving
Instrument Cluster and Display
Average Fuel Economy
The average fuel economy is calculated
every minute from the total traveled
distance on the trip meter and the total
fuel consumption, and the average fuel
economy for either TRIP A or TRIP B is
displayed.
The average fuel economy and trip
meters can be reset by pressing the INFO
switch for 1.5 s or more while in each
mode. After the data is cleared, the fuel
consumption is recalculated and the
- - - L/100 km (- - - mpg) for the one
minute prior to it being displayed is
indicated.
Current Fuel Economy
This displays the current fuel economy
by calculating the amount of fuel
consumption and the distance traveled.
Maintenance Monitor
The following maintenance period
notifi cations can be displayed by turning
the Maintenance Monitor on.
Scheduled Maintenance Tire Rotation Oil Change
For the setting method and indications
for the maintenance monitor, refer to the
Maintenance Monitor.
Refer to Maintenance Monitor on page
6-16 .
The maintenance monitor displays the
information when the ignition is switched
ON.
NOTE
This function is inoperable while the
vehicle is being driven.
Message display
When the remaining time or the distance
approaches 0, a message is displayed each
time the ignition is switched ON.
CX-5_8FN1-EA-16L_Edition1.indb 252016/12/12 10:05:45
Page 170 of 664
4–26
When Driving
Instrument Cluster and Display
*Some models.
NOTE
If any of the INFO switch is pressed
while a message is displayed, it will no
longer be displayed the next time the
ignition is switched ON.
After the vehicle is serviced and the
remaining time/distance is reset, the
message for the next maintenance
period will be displayed when the
remaining distance or time to the next
maintenance period approaches 0
(displays when engine is started).
If there are multiple messages, they are
displayed according to their order.
If OFF is set for Messages, messages
are not displayed.
Blind Spot Monitoring (BSM) Display
Displays the system status.
Refer to Blind Spot Monitoring (BSM) on
page 4-99 .
Distance Recognition Support
System (DRSS) Display *
Displays the distance between your
vehicle and the vehicle ahead.
Refer to Distance Recognition Support
System (DRSS) on page 4-112 .
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) Display
*
Displays the currently set system status.
Refer to Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) on page 4-121 .
CX-5_8FN1-EA-16L_Edition1.indb 262016/12/12 10:05:45
Page 179 of 664
4–35
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page
* Door-Ajar Warning Indication
7-31
* Liftgate-Ajar Warning Indication
7-31
* Door-Ajar Warning Light
7-31
*1 The light turns on when the ignition is switched on for an operation che\
ck, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains tur\
ned on, have the vehicle inspected at an
Authorized Mazda Dealer.
*2 The light turns on continuously when the electric parking brake (EPB) \
is applied.
Indication/Indicator Lights
These lights turn on or fl ash to notify the user of the system operation status or a system
malfunction.
Signal Indicator Page
* Front Passenger Air Bag Deactivation Indicator Light *1
2-61
(Green) * KEY Indicator Light
4-5
Security Indicator Light *1
3-46
* Wrench Indication/Indicator Light *1
4-38
(Blue) * Low Engine Coolant Temperature Indicator Light
4-38
CX-5_8FN1-EA-16L_Edition1.indb 352016/12/12 10:05:49
Page 181 of 664
4–37
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Page
* Blind Spot Monitoring (BSM) OFF Indicator Light *1 Malfunction
7-26
Except
malfunction 4-104
(White) * Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) Main Indication 4-126
(Green) * Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) Set Indication 4-126
(White/Green) * Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Indication 4-139
* Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) OFF Indicator Light *1 4-144
* Smart City Brake Support (SCBS) Indication
4-151
(Red) * Smart City Brake Support (SCBS) Indicator Light
4-151
* Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator \
Light *1 Smart City
Brake Support
(SCBS) System 4-152
Smart Brake
Support (SBS) System 4-155
(White) * Cruise Main Indication
4-168
(Green) * Cruise Set Indication
4-168
*1 The light turns on when the ignition is switched on for an operation che\
ck, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains tur\
ned on, have the vehicle inspected at an
Authorized Mazda Dealer.
CX-5_8FN1-EA-16L_Edition1.indb 372016/12/12 10:05:50
Page 182 of 664
4–38
When Driving
Instrument Cluster and Display
*Some models.
Wrench Indicator Light *
When the ignition is switched ON, the
wrench indicator light turns on and then
turns off after a few seconds.
The wrench indicator light turns on under
the following conditions:
When the preset maintenance period has
arrived.
When it’s time to replace the engine oil.
Refer to Maintenance Monitor on page
6-16 .
Low Engine Coolant Temperature
Indicator Light (Blue) *
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
CX-5_8FN1-EA-16L_Edition1.indb 382016/12/12 10:05:51
Page 189 of 664
4–45
When Driving
Automatic Transaxle
Manual Shift Mode
The manual shift mode gives you the feel
of driving a manual transaxle vehicle by
allowing you to operate the selector lever
manually. This allows you to control
engine rpm and torque to the drive wheels
much like a manual transaxle when more
control is desired.
To change to manual shift mode, shift the
lever from D to M.
NOTE
Changing to manual shift mode while
driving will not damage the transaxle.
To return to automatic shift mode, shift the
lever from M to D.
NOTE
If you change to manual shift mode
when the vehicle is stopped, the gear
will shift to M1.
If you change to manual shift mode
without depressing the accelerator
pedal when driving in D range, 5th
gear/6th gear, the gear will shift to M4/
M5.
Indications
Manual shift mode indication
In manual shift mode, the “M” of the shift
position indication in the instrument panel
illuminates.
Gear position indication
The numeral for the selected gear
illuminates.
Manual shift mode
indicationGear position indication
NOTE
If the gears cannot be shifted down
when driving at higher speeds, the gear
position indication will fl ash twice to
signal that the gears cannot be shifted
down (to protect the transaxle).
If the automatic transaxle fl uid (ATF)
temperature becomes too high, there
is the possibility that the transaxle
will switch to automatic shift mode,
canceling manual shift mode and
turning off the gear position indication
illumination. This is a normal function
to protect the AT. After the ATF
temperature has decreased, the gear
position indication illumination turns
back on and driving in manual shift
mode is restored.
CX-5_8FN1-EA-16L_Edition1.indb 452016/12/12 10:05:52
Page 191 of 664
4–47
When Driving
Automatic Transaxle
Second Gear Fixed Mode
When the selector lever is moved back
while the vehicle speed is about 10 km/h
(6.2 mph) or less, the transaxle is set in the
second gear fi xed mode. The gear is fi xed
in second while in this mode for easier
acceleration from a stop and driving on
slippery roads such as snow-covered
roads.
If the selector lever is moved back
or
forward
while in the second gear fi xed
mode, the mode will be canceled.
CX-5_8FN1-EA-16L_Edition1.indb 472016/12/12 10:05:53
