2017 MAZDA MODEL CX-5 weight

▼Closing the Bonnet
1. Check under the bonnet area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Lift the bonnet, grasp the padded area on the support rod, and secure the
support rod in the clip. Verify that the
support rod is secured in the clip
before closing the bonnet.

Clip ClipClip
3. Lower the bonnet slowly to a height of
about 20 cm (7.9 in) above its closed
position and then let it drop.
CAUTION
When closing the bonnet, do not push it
excessively such as by applying your
weight. Otherwise, the bonnet could be
deformed.
Maintenance and Care
Owner Maintenance
6-23
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

6. Insert a new battery with the positivepole facing up, and then cover the
battery with the battery cap.
7. Close the cover.
8. Reinsert the auxiliary key.
Ty r e s
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tyre inflation pressures and
stay within the recommended load limits
and weight distribution.
WA R N I N G
Using Different Tyre Types:
Driving your vehicle with different types of
tyres is dangerous. It could cause poor
handling and poor braking; leading to loss
of control.
Except for the limited use of the temporary
spare tyre, use only the same type tyres
(radial, bias-belted, bias-type) on all four
wheels.
Using Wrong-Sized Tyres:
Using any other tyre size than what is
specified for the vehicle (page 9-9) is
dangerous. It could seriously affect ride,
handling, ground clearance, tyre clearance,
and speedometer calibration. This could
cause you to have an accident. Use only
tyres that are the correct size specified for
the vehicle.
▼ Tyre Inflation Pressure
WA R N I N G
Always
inflate the tyres to the correct
pressure:
Overinflation or underinflation of tyres is
dangerous. Adverse handling or
unexpected tyre failure could result in a
serious accident.
Refer to Tyres on page 9-9.
Maintenance and Care
Owner Maintenance
6-43
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Action to be taken
Seat Belt Warning
Light (Front seat) The seat belt warning light turns on if the
driver or front passenger's seat is occupied
and the seat belt is not fastened with the ig-
nition switched ON.
If the driver or front passenger's seat belt is
unfastened (only when the front passenger's
seat is occupied) and the vehicle is driven at
a speed faster than abo
ut 20 km/h (12 mph),
the warning light flashes. After a short time,
the warning light stops flashing, but re-
mains illuminated. If a seat belt remains un-
fastened, the warning light flashes again for
a given period of time.
NOTE
•If the driver or front passenger's seat belt
is unfastened after th e warning light turns
on, and the vehicle speed exceeds 20 km/h
(12 mph), the warning light flashes again.
•Placing heavy items on the front passeng-
er's seat may cause the front passenger's
seat belt warning function to operate de-
pending on the weight of the item.
•To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger's seat. The sensor may
not function properly because the addi-
tional seat cushion could cause sensor in-
terference.
•If a small child is seated on the front pas-
senger's seat, the warning light may not
operate. Fasten the seat belts.
(Red)
Seat Belt Warning
Light (Rear seat)
*
If the rear seat belts are not fastened while
the ignition is switched ON , the driver and
the passenger are alerted by the warning
light.
The warning light opera tes even if there is
no passenger on the rear seat.
NOTE
If a rear seat belt is not fastened by a cer-
tain period of time after the engine has
been started, the warning light turns off. Fasten the seat belts.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-55
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Warning Sound isActivated
▼Lights-On Reminder
If lights are on and the ignition is switched
to ACC or off, a continuous beep sound
will be heard when the driver's door is
opened.
NOTE
•When the ignition is
switched to ACC,
the “Ignition Not Switched Off (STOP)
Warning Beep” (page 7-64) overrides
the lights-on reminder.
•A personalised function is available to
change the sound volume for the
lights-on reminder.
Refer to Personalisation Features on
page 9-12.
▼ Air Bag/Seat Belt Pretensioner
System Warning Beep
If there is a problem with the air bag/seat
belt pretensioner systems and the warning
light illumination, a warning beep sound
will be heard for about 5 seconds every
minute.

The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an expert
repairer, we recommend an Authorised
Mazda Repairer as soon as possible.
WA R N I N G
Do not drive the vehicle with the air bag/
seat belt pretensioner system warning beep
sounding:
Driving the vehicle with the air bag/seat
belt pretensioner system warning beep
sounding is dangerous. In a collision, the
air bags and the seat belt pretensioner
system will not deploy and this could result
in death or serious injury. Contact an
expert repairer, we recommend an
Authorised Mazda Repairer to have the
vehicle inspected as soon as possible.
▼Seat Belt Warning Beep
Front seat
If the vehicle speed exceeds about 20
km/h (12 mph) with the driver or front
passenger's seat belt unfastened, a warning
beep sounds continuously. If the seat belt
remains unfastened, the beep sound stops
once and then continues for about 90
seconds. The beep stops after the driver or
front passenger's seat belt is fastened.
NOTE
•Placing heavy items on the front
passenger seat may cause the front
passenger seat belt warning function to
operate depending on the weight of the
item.
•To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger seat. The sensor may
not function properly because the
additional seat cushion could cause
sensor interference.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-63
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

(Malaysia, Thailand, Indonesia)
Ty re s i z eInflation pressure
Up to 3 persons ―Full load
225/65R17 102H
*1Front 240 kPa (2.4 bar, 35 psi) 260 kPa (2.6 bar, 38 psi)
Rear 240 kPa (2.4 bar, 35 psi) 280 kPa (2.8 bar, 41 psi)
225/55R19 99V Front
250 kPa (2.5 bar, 36 psi) 260 kPa (2.6 bar, 38 psi)
Rear 250 kPa (2.5 bar, 36 psi) 290 kPa (2.9 bar, 42 psi)
1 person's weight: About 75 kg*1 SKYACTIV-G 2.0, SKYACTIV-G 2.5
Temporary spare tyre*
Tyre size Inflation pressure
185/80R17 99M 320 kPa (3.2 bar, 46 psi)
T145/90D16 106M 420 kPa (4.2 bar, 60 psi)
Winter tyre
Ty re s i z eInflation pressure
Up to 3 persons ―Full load
225/65R17
*1 MS Front
230 kPa (2.3 bar, 33 psi) 260 kPa (2.6 bar, 38 psi)
Rear 250 kPa (2.5 bar, 36 psi) 300 kPa (3.0 bar, 44 psi)
225/55R19
*2 MS Front
250 kPa (2.5 bar, 36 psi) 260 kPa (2.6 bar, 38 psi)
Rear 270 kPa (2.7 bar, 39 psi) 310 kPa (3.1 bar, 45 psi)
1 person's weight: About 75 kg*1 Load index and Speed Symbol: 102Q/102S/102H/102V*2 Load index and Speed Symbol: 99Q/99S/99H/99V
Wheel nut tightening torque
When installing a tyre, tighten the wheel nut to the following torque.
108―147 N·m (12―14 kgf·m, 80―108 ft·lbf)
▼ Fuses
Refer to Fuses on page 6-54.
▼Brakes
If you require information regarding the wear limit specificati
on for the brake disc plates
and the measurement method, please contact an expert repairer, we recommend an
Authorised Mazda Repairer. The information is made freely avail able.
Specifications
Specifications
*Some models.9-11
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2