2017 Lexus IS300h mirror

361-1. For safe use
IS300h_EE(OM53D89E)
Adjust the angle of the seatback so
that you are sitting straight up and so
that you do not have to lean forward
to steer. ( P. 173)
Adjust the seat so that you can
depress the pedals fully and so that
your arms bend slightly at the elbow
when gripping the steering wheel.
( P. 173)
Lock the head restraint in place with the center of the head restraint closest to
the top of your ears. ( P. 182)
Wear the seat belt correctly. ( P. 38)
Make sure that all occupants are wearing their seat belts before driving the vehi-
cle. ( P. 38)
Use a child restraint system appropriat e for the child until the child becomes
large enough to properly wear the vehicle’s seat belt. ( P. 59)
For safety drive
For safe driving, adjust the seat and mirror to an appropriate position before
driving.
Correct driving posture
1
2
Correct use of the seat belts
3
4

371-1. For safe use
1
For safety and security
IS300h_EE(OM53D89E)
Make sure that you can see backward clearly by adjusting the inside and outside
rear view mirrors properly. ( P. 187, 189)
Adjusting the mirrors
WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
●Do not adjust the position of the driver’s seat while driving.
Doing so could cause the driver to lose control of the vehicle.
●Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effec-
tiveness of the seat be lt and head restraint.
●Do not place anything under the front seats. Objects placed under the fron t seats may become jammed in the seat tracks and stop
the seat from locking in plac e. This may lead to an accident and the adjustment mech-
anism may also be damaged.
●Always observe the legal speed limi t when driving on public roads.
●When driving over long distances, take regular breaks before you start to feel tired.
Also, if you feel tired or sleepy while drivin g, do not force yourself to continue driving and take a break immediately.

1022. Instrument cluster
IS300h_EE(OM53D89E)
The indicators inform the driver of the operating state of the vehicle’s various sys-
tems.
Indicators
Turn signal indicator
( P. 233)
*2
(if equipped)
LDA (Lane Departure
Alert) indicator ( P. 279)
Tail light indicator
( P. 237)

(if equipped)
Lexus parking assist-sensor
indicator ( P. 309)
Headlight high beam indi-
cator ( P. 237)
*1, 2 Slip indicator
( P. 353)
*1
(if equipped)
Automatic High Beam indi-
cator ( P. 240)
*1VSC OFF indicator
( P. 354)
Rear fog light indicator
( P. 244)
*1, 3
(if equipped)
PCS warning light
( P. 269)
(if equipped)
Cruise control indicator ( P. 293, 305)
*4, 5
(if equipped)
BSM (Blind Spot Monitor)
outside rear view mirror
indicators ( P. 334)
(if equipped)
Dynamic radar cruise con-
trol indicator ( P. 293)
*6Security indicator
( P. 86, 92)
(if equipped)
Cruise control “SET” indica-
tor ( P. 293, 305)
*7Low outside temperature
indicator ( P. 105)
(if equipped)
LDA (Lane Departure
Alert) indicator ( P. 279)
“READY” indicator
( P. 219)
(if equipped)
LDA (Lane Departure Alert) indicator ( P. 279) EV indicator ( P. 79)

1032. Instrument cluster
2
Instrument cluster
IS300h_EE(OM53D89E)
*1: These lights turn on when the power switch is turned to ON mode to indicate that a
system check is being performe d. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunct ion in a system if a light does not come
on, or turn off. Have the vehicle inspected by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off.
*4: In order to confirm operation, the BSM outside rear view mirror indicators illuminate
in the following situations:
• When the power switch is turned to ON mode while the BSM main switch is set to
ON.
• When the BSM main switch is set to ON while the power switch is in ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indicators will
turn off after a few seconds.
If the BSM outside rear view mirror indicato rs do not illuminate or do not turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer.
*8EV drive mode indicator
( P. 224)
*9
(if equipped)
“SPORT S” indicator
( P. 348)
*9EV drive mode indicator
( P. 224)
*9
(if equipped)
“SPORT S+” indicator
( P. 348)
*8Eco drive mode indicator
( P. 348)
*9
(if equipped)
“CUSTOMIZE” indicator
( P. 348)
*9Eco drive mode indicator ( P. 348) Snow mode indicator ( P. 227)
*8“SPORT” indicator
( P. 348)
*1, 6“PASSENGER AIR
BAG” indicator ( P. 53)
*9
(if equipped)
“SPORT” indicator ( P. 348)

1042. Instrument cluster
IS300h_EE(OM53D89E)
*5: This light illuminates on the outside rear view mirrors.
*6: This light illuminates on the center panel.
*7: When the outside temperature is approximately 3°C (37°F) or lower, the indicator
will flash for approximately 10 seconds, then stay on.
*8:Except F SPORT models
*9: F SPORT models
WARNING
■If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when you start the hybrid system, this could mean that these systems are not available to help
protect you in an accident, which could result in death or serious injury. Have the vehi-
cle inspected by any authorized Lexus retailer or Lexus authorized repairer, or any reli- able repairer immediat ely if this occurs.

137
3
Operation of
each component
IS300h_EE(OM53D89E)
3-1. Key information
Keys .................................................. 138
3-2. Opening, closing and
locking the doors and
trunk
Doors ................................................144
Trunk .................................................. 151
Smart entry & start system .......157
3-3. Adjusting the seats
Front seats.......................................173
Rear seats (folding type) ...........175
Driving position memory .......... 177
Head restraints ............................ 182
3-4. Adjusting the steering
wheel and mirrors
Steering wheel ............................. 185
Inside rear view mirror ............. 187
Outside rear view mirrors....... 189
3-5. Opening, closing the
windows and moon roof
Power windows ........................... 193
Moon roof .......................................197

1773-3. Adjusting the seats
3
Operation of each component
IS300h_EE(OM53D89E)
The seat and steering wheel are automatically adjusted to allow the driver to
enter and exit the vehicle easily.
When all of the following have been
performed, the driver’s seat and steer-
ing wheel are automatically adjusted to
a position that allows driver to enter
and exit the vehicle easily.
• The shift lever has been shifted to P.
• The power switch has been turned
off.
• The driver’s seat belt has been unfastened.
When any of the following has been perf ormed, the driver’s seat and steering
wheel automatically return to their original positions.
• The power switch has been turned to ACCESSORY mode or ON mode.
• The driver’s seat belt has been fastened.
■Operation of the power easy access system
When exiting the vehicle, the power easy access system may not operate if the seat is
already close to the rearmost position, etc.
■Customization
The seat movement amount settings of th e power easy access system can be custom-
ized. (Customizable features: P. 657)
Driving position memory
: If equipped
This feature automatically adjusts the driver’s seat, steering wheel and out-
side rear view mirrors to make enteri ng and exiting the vehicle easier or to
suit your preferences.
Power easy access system

1783-3. Adjusting the seats
IS300h_EE(OM53D89E)
Your preferred driving position (the position of the driver’s seat, steering wheel
and outside rear view mirrors) can be re corded and recalled by pressing a but-
ton.
Three different driving positions can be recorded into memory.
■Recording procedure
Check that the shift lever is in P.
Turn the power switch to ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the
desired positions.
While pressing the “SET” button,
or within 3 seconds after the
“SET” button is pressed, press
button “1”, “2” or “3” until the
buzzer sounds.
If the selected button has already been preset, the previously recorded
position will be overwritten.
■Recall procedure
Check that the shift lever is in P.
Turn the power switch to ON mode.
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
Driving position memory
1
2
3
4
1
2
3