2017 Lexus ES300h brake

What to do if...
99
ES300h_QG_OM33C90U_(U)
List of Warning/Indicator Lights
Immediately stop the vehicle in a safe place and contact your Lexus dealer.
Continuing to drive the vehicle may be dangerous.
(U.S.A.)
Brake system warning light
(Canada)
Have the vehicle inspected by your Lexus dealer immediately.
(U.S.A.)Malfunction
indicator lamp(Flashes)
PCS warning light*1
(Canada)Slip indicator light
SRS warning lightBrake system warning light
(U.S.A.)
ABS warning light(Blinking and then continu-
ously on)
Tire pressure warning light
(Canada)
Electric power steering
system warning light
Follow the correction procedures.
Low fuel level warning light
(Illuminates without
blinking)
Tire pressure warning light*2
Seat belt reminder light
Master warning light
(Flashes)
“AFS OFF” indicator*1
For further information, refer to the OWNER’S MANUAL.

100
What to do if...
ES300h_QG_OM33C90U_(U)
*1: If equipped
*2: It also comes on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature. Adjust the tire inflation pressure to the specified level.
The light will turn off after a few minutes. In case the light does not turn off even if the tire
inflation pressure is adjusted, have the system checked by your Lexus dealer.
See the OWNER’S MANUAL
Turn signal indicatorLDA indicator*1
Headlight indicator (U.S.A.)Intuitive parking assist
indicator
*1
Tail light indicator (Canada)
(Flashes)
Slip indicator light
Headlight high beam indicatorVSC OFF indicator
Automatic High Beam
indicator
*1PCS warning light*1
Fog light indicatorBSM outside rear view mirror
indicators
*1
“READY” indicator “A I R B A G O N / O F F ”
indicator
EV indicator
Cruise control indicator(U.S.A.)Parking brake
indicator
Radar cruise control
indicator
*1(Canada)
Cruise control “SET” indicatorLow outside temperature
indicator
For further information, refer to the OWNER’S MANUAL.

102
What to do if...
ES300h_QG_OM33C90U_(U)
■Starting the hybrid system
Ensure that the shift lever is in P and
depress the brake pedal.
Touch the Lexus emblem side of the
electronic key to the power switch.
The power switch will turn to ON
mode.
When the smart access system with
push-button start is deactivated in cus-
tomization setting, the power switch
will turn to ACCESSORY mode.
Firmly depress the brake pedal and
check that is shown on the
multi-information display.
Press the power switch.
In the event that the hybrid system still cannot be started, contact your Lexus dealer.
If the hybrid system doesn’t start
Make sure that the correct operating procedures have been followed. Make sure that the brake pedal is firmly
depressed when attempting to start the
hybrid system. (→P. 2 6 )
1
2
3
4
If the electronic key battery becomes depleted , replace it with a new battery. For instruc-
tions on replacing the battery, refer to th e OWNER’S MANUAL. If you need further assis-
tance, contact your Lexus dealer.
Brake pedal
If the hybrid system still does not start, see the OWNER’S MANUAL for more information
or contact your Lexus dealer.