2017 KIA SPORTAGE ignition

SPORTAGE FEATURES & FUNCTIONS GUIDE6*IF EQUIPPED
INSTRUMENT CLUSTER
Trip Computer/Tripmeter
REMINDERS:
• Appearance of Tripmeter display may differ, as equipped
• All stored driving information (except Odometer and Range) is reset if the battery is disconnected
The Trip Computer is a driver information system that
displays information related to driving. It appears on the
display when the ignition switch or the ENGINE START/
STOP button* is in the ON position.
To cycle through the different LCD Instrument Cluster
Modes, press the Mode button A.
When in Trip Computer mode , toggle the Move
switch B to cycle through the screens. When displaying
TRIP A or TRIP B screens, press and hold the OK button C to reset the Tripmeter to zero.
(Type B Cluster)
FUEL ECONOMY
• RANGE (Distance to Empty) • Average MPG • Instant MPG
TRIP A
• Tripmeter A • Average MPH • Elapsed Time (E / T )
TRIP B
• Tripmeter B • Average MPH • Elapsed Time (E / T )
LCD Instrument Cluster Modes
Press the Mode button A to change LCD Instrument Cluster Modes.
Trip Computer Mode: Displays driving information for
tripmeter, fuel economy, etc.
A
B
C
Turn-by-Turn Mode*: Displays the state of the navigation
Lane Departure Warning System (LDWS) Mode*:
Displays the state of the LDWS system
A/V Mode*: Displays the state of the A / V system
Service Modes / Master Warning: Informs on upcoming
service intervals and warning messages related to TPMS,
BSD* and others
User Settings Mode: Change the settings of the doors,
lamps and other features
Av e r a g e
(Buttons located on Steering Wheel)
Instant Fuel Consumption Mode
Press the Mode button A and cycle to the Fuel Economy screen in the Trip Computer
to display Instant Fuel Consumption, which calculates fuel consumption during the
past few seconds.
1. Keep your vehicle in good condition with regular maintenance
2. Travel lightly, without carrying unnecessary weight in your vehicles
3. Don’t let the engine idle longer than necessary
REMINDERS:
•Instant Fuel Consumption Mode is not to be used in calculation or as a reference for AVER AGE fuel economy
• If the vehicle speed exceeds 1 MPH (1.6 km/h) after being refueled with more than 1.6 gallons (6 liters), the average fuel economy will be cleared to zero (----)

SPORTAGE FEATURES & FUNCTIONS GUIDE8*IF EQUIPPED
INSTRUMENT CLUSTER
Active ECO System (ECO Mode)*
For more information on the Active ECO indicator, refer to your Owner’s Manual or contact your local dealership.
Active ECO helps improve fuel economy by controlling
several vehicle components. When activated, it
optimizes drivetrain operations such as engine power
and transmission to help improve fuel economy.
To turn ON, press the DRIVE MODE button B and
select ECO mode. The green ECO indicator light C in
the instrument cluster will illuminate, indicating that
Active ECO is operating. Active ECO will remain on
even when the ignition is cycled.
To turn Active ECO OFF, press the DRIVE MODE
button B again.
To help improve your fuel economy: •Drive at a moderate speed, accelerating smoothly and at a moderate rate • Keep tires inflated to the recommended pressure •Be sure the wheels are properly aligned
QUICK TIPS
Active ECO System Video To view a video on your mobile device, snap this QR Code or visit the listed website.
Refer to page 2 for more information.
www.KuTechVideos.com/ql13/2017
QR CODEDrive Mode Integrated Control System*
The Drive Mode may be selected based on the driver’s
preferences and road conditions.
To cycle through the different Drive Modes A, press the
DRIVE MODE button B. The instrument cluster will display
SPORT or ECO when selected. When in NORMAL mode, it
will not display in the instrument cluster.
REMINDER:
• The system is turned ON and in NORMAL mode when ignition is in the ON position
• When ECO mode is selected, the indicator will display and system remains on, even when ignition is cycled. Otherwise the system will default to NORMAL.
A
(Located below gear shift)
B
(Located in Instrument Cluster)
C

9ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
DRIVER'S PANEL
Blind Spot Detection (BSD) System*
The BSD system uses radar sensors to help alert the driver before changing lanes. The
light on the BSD button A will illuminate when turned ON. The outside rearview mirror
warning lights will also illuminate for 3 seconds.
The system will become active when the vehicle is traveling more than 20 mph and will
alert the driver if another vehicle is detected by the radar sensor, up to 230 feet away.
For more information on the Blind Spot Detection System, please refer to the Owner’s Manual.
Blind Spot Detection*/Lane Change Assist*
1st-stage alert: When another vehicle is detected within the BSD system boundary B, a
yellow indicator will illuminate on the outside rearview mirrors.
2nd-stage alert: When 1st-stage alert is on and the driver activates a turn signal, a
flashing yellow indicator will illuminate on the outside rearview mirrors and the system
will sound an alert.
Rear Cross Traffic Alert (RCTA)*
If the RCTA system sensors detect approaching vehicles from the left or right side C, the
system will sound an audible alert, the warning indicators on the outside rearview mirror
will illuminate and a message will appear on the LCD screen, with these conditions:
•When the gear shift is in Reverse
•When the vehicle moves in reverse from a parked position
•When the vehicle is moving less than 6 mph
REMINDERS:
•When the BSD system is ON and the ignition is cycled to OFF then ON again, the BSD system returns to ON
•The RCTA feature can be turned OFF/ON in User Settings
Blind Spot Detection System Video To view a video on your mobile device, snap this QR Code or visit the listed website.
Refer to page 2 for more information.
www.KuTechVideos.com/ql13/2017
QR CODE
A
B
C

SPORTAGE FEATURES & FUNCTIONS GUIDE10*IF EQUIPPED
DRIVER'S PANEL
Lane Departure Warning System (LDWS)*
With the ENGINE START/STOP button in the ON position, press
the LDWS button C to turn system ON. The instrument cluster
indicator will illuminate green.
If the LDWS detects that you are veering outside of your lane, the
system may issue a warning on the LCD screen and an alert may
sound, under these conditions:
•The vehicle exceeds approximately 43 mph
•The LDWS system recognizes the lane the vehicle is traveling in
REMINDERS:
•LDWS will not issue a warning if the turn signal is activated
• If the LDWS button is ON and ignition is cycled, the system will turn ON again. If the LDWS button is OFF, the system remains OFF
Instrument Panel Dimmer
With parking lights/headlights ON, toggle switch A up (+) or down (-) to adjust the brightness of
the instrument panel illumination.
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the audio/navigation system* screens; use SETUP to adjust brightness on the screens.
A
B
C
(Buttons located on left of Steering Wheel)Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure Warning System Video
To view a video on your mobile device, snap this QR Code or visit the listed website.
Refer to page 2 for more information.
www.KuTechVideos.com/ql13/2017
QR CODE
The Lane Departure Warning System (LDWS) is not a substitute for safe and proper driving. Always drive safely and use caution. LDWS may not always alert the driver if the vehicle is driven outside of its lane.
When the LDWS sensor detects the lane traveling inWhen the LDWS sensor does not detect the lane traveling in
When the LDWS sensor detects the vehicle veering outside of the lane traveling in, a yellow indicator will illuminate
Electronic Stability Control (ESC)
The ESC system is designed to help stabilize the
vehicle during cornering maneuvers. It is a good
idea to keep the ESC turned ON for daily driving
whenever possible.
Press ESC button B to turn ESC OFF/ON.
REMINDERS:
•ESC is turned ON by default at vehicle start-up. When ignition is cycled, ESC will turn ON again
• The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is in operation

15ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
STEERING WHEEL CONTROLS
Turn Signals & Fog Lights*
To operate:
•Turn Signals - Move lever Up/Down for Right /Left turn signal
•Fog Lights - Push toggle switch to turn fog lights ON/OFF
REMINDER: Headlights must be ON for fog light operation.
One-Touch Lane Change Signal is activated by moving the Turn Signal
Lever up/down slightly for less than 1 second and then releasing. The
lane change signal will blink 3 times.
To change how many times (3/5/7) the Lane Change Signal blinks, go to
User Settings Mode in the LCD Instrument Cluster modes.
For more information on the User Settings Mode, please refer to your Owner’s Manual.
Sportage Daytime Running Lights Video To view a video on your mobile device, snap this QR Code or visit the listed website.
Refer to page 2 for more information.
www.KuTechVideos.com/ql13/2017
QR CODELED Daytime Running
Lights (DRL)*
DRL may help others to see the front of your
vehicle during the day. The lights will be on
automatically when the ignition or ENGINE
START/STOP button is ON and the headlight
switch is in the AUTO position, unless one of
the following occurs:
•Headlights are on
•Parking brake is applied
•Fog lights are on
•Engine is turned off
•Switch is in the OFF position
REMINDER: DRL only operates during the daytime.

17ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
STEERING WHEEL CONTROLS
A Audio Mode button: Press to cycle through FM/AM/Sirius®/Media
(CD/USB/iPod®/Aux /Bluetooth Audio®/My Music) modes
B Seek/Preset button
FM/AM/Sirius® Modes: Press to advance through Preset Stations.
Press and hold to Auto Seek
Media Modes: Press to move Track Up/Down. Press & hold to Fast
Forward/Rewind
C Volume button: Press up/down to raise/lower volume
D Mute button: Press to mute all audio
Your vehicle’s steering wheel buttons may differ from those in the illustrations. For further audio system operations, refer to pages 20-22. See your Owner’s Manual for more details.
Driving while distracted is dangerous and should be avoided. Drivers should remain attentive to driving and always exercise caution when using the steering-wheel-mounted controls while driving.
Audio Controls
Pressing the Audio Mode button for more than 1 second will turn Audio Mode ON/OFF.
QUICK TIP
Cruise Control
E Cruise Control button: Press to turn the Cruise Control
ON/OFF
F Resume Cruising Speed button: Press up to resume or increase
cruising speed
SET Cruising Speed button: Press down to set or decrease
cruising speed
G Cruise Control CANCEL button: To cancel Cruise Control, do one of
the following:
•Press the brake pedal
•Press the CANCEL button

•Cruise Control is designed to function above approximately 25 mph •The Cruise Control system will not activate until the brake pedal has been depressed at least once after ignition ON or engine starting
QUICK TIPS
A
BD
E
G
FC

23ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
CENTER PANEL
Aux/USB/iPod® Port & Power OutletsDigital Clock
Standard Audio System* Clock Setup:
1. Briefly press the CLOCK key (under 1 second) to display time screen
2. Press and hold CLOCK key for more than 1 second to enter the time
setting mode
3. Use the touchscreen buttons to adjust the time
UVO eServices System* Clock Setup:
Press the SETUP button, then press the on-screen Clock icon to enter
clock settings.
UVO eServices with Premium Navigation System* Clock Setup:
Press the SETUP button, then press the on-screen Clock icon to enter
clock settings.
The power outlets are inactive when the ignition is in the OFF position.
QUICK TIP
AUX and USB ports can be used to connect a smartphone or
MP3 player.

27ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
CENTER PANEL
Downhill Brake Control (DBC)
DBC helps drivers maneuver down steep hills by automatically braking for
them, allowing drivers to concentrate on steering.
Press button A to turn DBC ON/OFF.

•When on, the DBC will turn OFF when button is pressed again or vehicle speed is over 38 mph •If the red indicator illuminates, the DBC system may have malfunctioned. Take your vehicle to an authorized Kia dealer and have the system checked
QUICK TIPS
REMINDER: The DBC defaults to OFF when ignition is cycled.
AWD (All-Wheel Drive) Lock*
When you select AWD Lock mode by pressing the AWD LOCK button B, the
AWD LOCK mode increases the drive power when driving on wet pavement,
snow-covered roads and/or off-road.
•This mode is used for climbing or descending sharp grades, off-road
driving, driving on sandy and muddy roads, etc., to maximize traction
•This mode automatically begins to deactivate at speeds above 19 mph
(30 km/h) and is shifted to AWD AUTO mode at speeds above 25 mph
(40 km/h). If the vehicle decelerates to speeds below approximately 25
mph (40 km/h), however, the transfer mode is shifted into AWD LOCK
mode again
When the AWD LOCK mode is deactivated, a shock may be felt as the
drive power is delivered entirely to the front wheels. This shock is not a
mechanical failure.
(Located below gear shift)
A
B