SPORTAGE FEATURES & FUNCTIONS GUIDE6*IF EQUIPPED
INSTRUMENT CLUSTER
Trip Computer/Tripmeter
REMINDERS:
• Appearance of Tripmeter display may differ, as equipped
• All stored driving information (except Odometer and Range) is reset if the battery is disconnected
The Trip Computer is a driver information system that
displays information related to driving. It appears on the
display when the ignition switch or the ENGINE START/
STOP button* is in the ON position.
To cycle through the different LCD Instrument Cluster
Modes, press the Mode button A.
When in Trip Computer mode , toggle the Move
switch B to cycle through the screens. When displaying
TRIP A or TRIP B screens, press and hold the OK button C to reset the Tripmeter to zero.
(Type B Cluster)
FUEL ECONOMY
• RANGE (Distance to Empty) • Average MPG • Instant MPG
TRIP A
• Tripmeter A • Average MPH • Elapsed Time (E / T )
TRIP B
• Tripmeter B • Average MPH • Elapsed Time (E / T )
LCD Instrument Cluster Modes
Press the Mode button A to change LCD Instrument Cluster Modes.
Trip Computer Mode: Displays driving information for
tripmeter, fuel economy, etc.
A
B
C
Turn-by-Turn Mode*: Displays the state of the navigation
Lane Departure Warning System (LDWS) Mode*:
Displays the state of the LDWS system
A/V Mode*: Displays the state of the A / V system
Service Modes / Master Warning: Informs on upcoming
service intervals and warning messages related to TPMS,
BSD* and others
User Settings Mode: Change the settings of the doors,
lamps and other features
Av e r a g e
(Buttons located on Steering Wheel)
Instant Fuel Consumption Mode
Press the Mode button A and cycle to the Fuel Economy screen in the Trip Computer
to display Instant Fuel Consumption, which calculates fuel consumption during the
past few seconds.
1. Keep your vehicle in good condition with regular maintenance
2. Travel lightly, without carrying unnecessary weight in your vehicles
3. Don’t let the engine idle longer than necessary
REMINDERS:
•Instant Fuel Consumption Mode is not to be used in calculation or as a reference for AVER AGE fuel economy
• If the vehicle speed exceeds 1 MPH (1.6 km/h) after being refueled with more than 1.6 gallons (6 liters), the average fuel economy will be cleared to zero (----)
7ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER
To enter the User Settings mode in the LCD
Instrument Cluster Modes, press the Mode
button A when the vehicle is at a standstill
and with the ENGINE START/STOP button in
the ON position and select User Settings .
You can navigate the selections on the display
by toggling the Move switch B. Select the
item by pressing the OK button C.
User Settings Modes
Driving Assist*
•Rear Cross Traffic
Alert*
•Autonomous
Emergency
Braking*
•Forward Collision
Warning*
Door/Liftgate
(Tailgate)
•Automatic Lock &
Unlock
•Two Press Unlock
•Power Liftgate*
•Smart Liftgate*
Lights
•One-Touch Turn
Signal
•Head Lamp Delay*
•Welcome Light*
Sound
•Park Assist System
Volume*
•Blind Spot Detection
Sound*
•Welcome Sound*
Service Interval
•ON/OFF
•Set Mileage/Months
Convenience
•Steering Position
•Wiper/Light
Display*
Other Features
•Fuel Economy Auto
Reset ON/OFF
•Fuel Economy Unit
•Temperature Unit
•Tire Pressure Unit*
User Settings Mode
A
B
C
(Buttons located on Steering Wheel)
Service Mode
To enter Service Mode, press the Mode button A and cycle to Service Mode
. Then press the OK button C to enter. System will display tire pressure
status, number of miles remaining until next service is due, as well as the
type of service due.
When service is required, the following will be
displayed: Service Required.
To reset the Service Mode system, press and hold
the OK button C for more than 1 second.
To turn Service In OFF, go to User Settings.
Service Interval Setting
To s e t t h e s e r v i c e in t e r v a l in U s e r S e t t in g s m o d e:
•Press the Mode button A to cycle to
User Settings
•If Service Interval is OFF, press the OK button C
to turn ON
•Use the Move switch B to select /change the
interval setting
•Press the OK button C to select the interval
0000mi.
Service inOff
Service Required
