7
To view a video on your mobile device, snap these QR Codes or visit the listed website .
Refer to page 2 for more information .
LCD Display Video
LCD Display: Maintenance Video
QR CODES
www.KuTechVideos.com/ub13/2017
www.KuTechVideos.com/ub13/2017
MPG
030
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBack OFF7500 mi
15000 mi Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set AlarmRESETRESET
MPG
030
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBackOFF 7500 mi
15000 mi
Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set Alarm
RESETRESET
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBack OFF7500 mi
15000 mi Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set Alarm
RESETRESET
( Type B cluster)
User Settings*
(Type B cluster)
To enter the User Settings mode
in the LCD Instrument Cluster
when the vehicle is at a standstill
and with the ENGINE START/
STOP button* in the ON position or
ignition on, press the TRIP button A to toggle to User Settings . Press and hold the
TRIP button for more than 2 seconds to enter .
Toggle through the menu by pressing the TRIP
button and select the item by pressing the RESET
button B .
User Settings Menu
Car Option:
•Align Steering Wheel*
•Outside Temperature Unit*
•Language
Maintenance:
•Engine Oil
•Tire Rotation
For more information on the User Settings mode, please refer to your Owner’s Manual.
Service Mode (Maintenance)*
(Type B cluster)
When service is required, the following
screens will be displayed:
•Rotate Tire
•Change Engine Oil
To reset or deactivate the Maintenance
system reminder, press the RESET button B for more than one second . Then toggle
to the preference and select by pressing the
RESET button B .
Service (Maintenance) Interval Setting
When in User Settings mode, press the TRIP
button A to toggle to Maintenance and
select by pressing the RESET button B .
When in the Maintenance mode, toggle to
the menu item and press the RESET button B to enter:
•Engine Oil
•Tire
Toggle to your selection and press the
RESET button B to set .
TR IP
RESET
(Located on the right side of the Steering Wheel)
A
B
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER
