2017 KIA RIO ignition

6
Fuel Economy
There are several factors that
contribute to your vehicle’s
fuel economy, including
maintenance of your vehicle,
driving style, environmental
conditions, vehicle weight
and vehicle aerodynamics .
Below are tips on how to help
improve fuel economy:
•Keep your vehicle in good
condition with regular
maintenance
•Don’t let the engine idle
longer than necessary
•Drive at a moderate speed,
accelerating smoothly and
at a moderate rate
•Keep tires inflated to the recommended pressure
•Travel lightly, without carrying unnecessary weight in
your vehicles
•Avoid placing large or heavy items on roof racks
•Avoid hilly, winding or poorly maintained roads
REMINDER: Driving range varies depending on a vehicle’s fuel tank size, e .g .12-gal .vs .24-gal . Even though the two vehicles’ MPG may be the same, the vehicle with the larger tank will have the greater range .
For more information on Fuel Economy, you can snap the QR code above to view a video or refer to the brochure “GETTING MORE OUT OF EVERY GALLON, FUEL-SAVING TIPS TO DRIVE BY” available at your local dealership.
Fuel Economy Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODETR IP
RESET
(Located on the right side of the Steering Wheel)
A
B
Tr ip A
Tr ip B
Elapsed Time
Distance to empty
Avg . MPG
Instant MPG
Avg . MPH
(Type B cluster)
(Type B cluster)
Trip Computer / Tripmeter
The Trip Computer is a driver information system that
displays information related to driving . It appears on
the display when the ignition switch or the ENGINE
START/STOP button* is in the ON position .
To cycle through the different Trip Computer modes,
press the TRIP button A .
To display the Tripmeter, press the TRIP button A, then select Trip A
or Trip B . Press the RESET button B for more than 1 second to reset
the Tripmeter to zero .
REMINDERS:
• Appearance of Trip Computer / Tripmeter display may differ, as equipped
• All stored driving information (except Odometer and Range / Distance to Empty) is reset if the battery is disconnected
Instant Fuel Consumption Mode*
Press the TRIP button A to cycle to the Instant Fuel Consumption
mode . This screen displays the calculated fuel consumption during
the past few seconds .
1 . Keep your vehicle in good condition with regular maintenance
2 . Travel lightly, without carrying unnecessary weight in your vehicle
3 . Don’t let the engine idle longer than necessary
REMINDERS:
•Not to be used in calculating or as a reference for AVER AGE fuel economy
• If the vehicle speed exceeds 1 MPH (1 .6 km/h) after being refueled with more than 1 .6 gallons (6 liters), the average fuel economy will be cleared to zero (----)
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER

7
To view a video on your mobile device, snap these QR Codes or visit the listed website .
Refer to page 2 for more information .
LCD Display Video
LCD Display: Maintenance Video
QR CODES
www.KuTechVideos.com/ub13/2017
www.KuTechVideos.com/ub13/2017
MPG
030
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBack OFF7500 mi
15000 mi Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set AlarmRESETRESET
MPG
030
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBackOFF 7500 mi
15000 mi
Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set Alarm
RESETRESET
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBack OFF7500 mi
15000 mi Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set Alarm
RESETRESET
( Type B cluster)
User Settings*
(Type B cluster)
To enter the User Settings mode
in the LCD Instrument Cluster
when the vehicle is at a standstill
and with the ENGINE START/
STOP button* in the ON position or
ignition on, press the TRIP button A to toggle to User Settings . Press and hold the
TRIP button for more than 2 seconds to enter .
Toggle through the menu by pressing the TRIP
button and select the item by pressing the RESET
button B .
User Settings Menu
Car Option:
•Align Steering Wheel*
•Outside Temperature Unit*
•Language
Maintenance:
•Engine Oil
•Tire Rotation
For more information on the User Settings mode, please refer to your Owner’s Manual.
Service Mode (Maintenance)*
(Type B cluster)
When service is required, the following
screens will be displayed:
•Rotate Tire
•Change Engine Oil
To reset or deactivate the Maintenance
system reminder, press the RESET button B for more than one second . Then toggle
to the preference and select by pressing the
RESET button B .
Service (Maintenance) Interval Setting
When in User Settings mode, press the TRIP
button A to toggle to Maintenance and
select by pressing the RESET button B .
When in the Maintenance mode, toggle to
the menu item and press the RESET button B to enter:
•Engine Oil
•Tire
Toggle to your selection and press the
RESET button B to set .
TR IP
RESET
(Located on the right side of the Steering Wheel)
A
B
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER

8
To help improve your fuel economy: •Drive at a moderate speed, accelerating smoothly and at a moderate rate •Keep tires inflated to the recommended pressure •Be sure the wheels are properly aligned
For more information on Active ECO, refer to your Owner’s Manual or contact your local dealership.
QUICK TIPS
Active ECO System Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODE
(Type B Cluster)
(Buttons located on left side of Driver’s Panel)
A
B
Active ECO System*
Active ECO helps improve fuel economy by controlling
several vehicle components . When activated, it optimizes
drivetrain operations such as engine power and transmission
to help improve fuel economy .
To turn ON, press the ACTIVE ECO button A . The green ECO
Indicator light B in the instrument cluster will illuminate,
indicating that the Active ECO is operating . The Active ECO
System will remain on even when the ignition is cycled .
To turn the Active ECO System OFF, press the ACTIVE ECO
button A again .
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER

9
The ISG system is disabled when: •A seat belt is unfastened •The hood or a door is opened •Battery condition is poor •The front or rear defroster is turned on •Engine coolant temperature is low
•The outside ambient temperature is too low/high •Emission control devices activate •The vehicle is on a steep slope
QUICK TIPS
Idle, Stop and Go System Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODE
B
(Buttons located on left side of Driver’s Panel)
(Type B Cluster)
A
Idle, Stop and Go (ISG) System*
The ISG system helps reduce fuel consumption by automatically shutting down
the engine when the vehicle is at a standstill .
When the ISG system is ON and the vehicle is at a standstill the engine will
stop, and the green AUTO STOP indicator on the instrument cluster A will
illuminate and the message Auto Stop will appear in the LCD screen* .
The engine will restart when the brake pedal is released or the shift lever is
moved from D (Drive) to the R (Reverse) position or to Sport mode . When engine
restarts, the green AUTO STOP indicator on the instrument cluster will turn off .
To deactivate the ISG System, press the ISG OFF button B . If you press again,
the system will be activated .
REMINDERS:
•ISG is active by default at vehicle start-up . When ignition is cycled, ISG will turn ON again
•Under certain conditions, the engine will restart automatically
• If the AUTO STOP indicator is illuminated yellow, please contact an authorized Kia dealer
For more information on Idle, Stop and Go System, refer to your Owner’s Manual or contact your local dealership.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL

10
Hill-Start Assist Control (HAC)
HAC helps prevent the vehicle from rolling backwards when accelerating
from a stop while on a steep incline .
The HAC automatically activates whether the ESC is OFF or ON but does NOT
activate when the ESC has malfunctioned .
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position .
•
•When HAC is active (e .g ., during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator – this is normal HAC operation •HAC provides a 2-second delay before the vehicle may start rolling backwards
QUICK TIPS
(Buttons located on left side of Driver’s Panel)
AB
Instrument Panel Dimmer
With parking lights / headlights ON, toggle switch A up or down to adjust
display brightness of the instrument panel illumination .
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the UVO eServices with Navigation system screen . Use navigation setup to adjust brightness on the navigation system .
Electronic Stability Control (ESC)
The ESC system is designed to help stabilize the vehicle during cornering
maneuvers . It is a good idea to keep the ESC turned ON for daily driving
whenever possible .
Press ESC OFF button B to turn OFF .
REMINDERS:
•ESC is active by default at vehicle start-up . When ignition is cycled, ESC will turn ON again
• The ESC Indicator Light in the instrument cluster will be lit momentarily whenever the ESC is active
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to your Owner’s Manual.
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

18
Cruise Control* Audio Controls
CRUISE
For further audio system operations, refer to pages 19 – 22
Your vehicle’s steering wheel buttons may differ from those in the illustrations. See your Owner’s Manual for more details.
Pressing the Audio MODE button for more than 1 second will turn Audio Mode ON/OFF
QUICK TIP

•Cruise Control is designed to function above approximately 25 mph •The cruise control system will not activate until the brake pedal has been depressed at least once after ignition ON or engine starting
QUICK TIPS
AB
DC
F
G
HE
( Type B)
A Volume button: Press up/down to raise/lower volume
B Seek/Preset button
• Radio Mode: Press to advance through Preset Stations . Press and hold
to Auto Seek
•Media Mode: Press to move Track up/down . Press & hold to FF/REW
C Audio MODE button: Press to cycle through FM/AM/SiriusXM®/CD/MP3/
USB/iPod®/Aux /Bluetooth® Audio* modes
D MUTE button: Press to mute all audio
E CRUISE Control On/Off button: Press to turn the Cruise Control
system On/Off
F Resume Cruising Speed button: Press up to resume or increase
Cruising Speed
G Set Cruising Speed button: Press down to set or decrease
Cruising Speed
H Cruise Control CANCEL button: To cancel Cruise Control, do one
of the following:
•Press the brake pedal
•Press the CANCEL button
REMINDER: Standard Cruise Control is a part of the Smart Cruise Control System (SCC) and can be set as the operating mode . To switch from SCC to Standard Cruise Control, press and hold the CRUISE button (the SCC system must not be activated to change modes) . Repeat to switch back to SCC mode .
Driving while distracted is dangerous and should be avoided. Drivers should remain attentive to driving and always exercise caution when using the steering-wheel-mounted controls while driving.
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
STEERING WHEEL CONTROLS

23
Aux/USB/iPod® Port & Power Outlets
The AUX/USB/iPod® ports can be used to connect audio devices,
smartphones, MP3 players and an iPod® . The Power Outlets are
for 12V electric accessories .
Press the DONE button* on the navigation screen to ensure changes are saved .
QUICK TIP
The power outlets are inactive when ignition is in the OFF position .
QUICK TIP
Digital Clock
Standard Audio System* Clock Setup:
1 . With audio system on: Press the SETUP/CLOCK button A until the clock adjustment mode displays
2 . Rotate knob B to set the Clock, then press to save
setting
UVO eServices System* Clock Setup:
Press the CLOCK button to display the Clock Setting screen .
Then use the on-screen buttons to navigate through setup .
UVO eServices with Navigation* Clock Setup:
Press the SETUP button and select the on-screen CLOCK button and then
TIME to display the Clock Setting screen . Then use the on-screen buttons
to adjust time . Press DONE to save settings .
A
B
REMINDER: Using the power outlets and AUX /USB/iPod® ports for prolonged periods of time with the ignition / ENGINE START/STOP button in the ACC or ON position (Engine OFF ) could cause the battery to discharge .
For more information on the Aux/USB/iPod® Ports and Power Outlets, refer to the Owner's Manual.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL

26
135R
6
4
2
N
When shifting into gears 1-6, the Shift Lever can be moved without pulling the Shift Lever button .
135R
6
4
2
N
QUICK TIP
AB
EDC
Manual Gear Shift*
Starting the Engine
1 . Apply Parking Brake A
2 . Depress Clutch fully B
3 . Shift into Neutral C
4 . Turn ignition to START
Shifting into Reverse
1 . Depress Clutch fully B
2 . Shift into Neutral C
3 . Press the Shift Lever button D
4 . Shift into Reverse E
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
CENTER PANEL