2017 KIA RIO engine

12
Engine Start/Stop Button*
To use the ENGINE START/STOP button, you
must have the Smart Key fob on your person or
inside the vehicle .
To start the engine:
1 . Depress the brake pedal
2 . Press the ENGINE START/STOP button while
gear shift is in P (Park) (or while in Neutral for
Manual Gear Shift)
To turn the engine OFF:
1 . Move gear shift into Park
2 . Press the ENGINE START/STOP button
REMINDERS:
• In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times successively within 3 seconds
• If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to the ENGINE START/STOP button (Lock button side closest) and press to start engine
Engine Start/Stop Button and Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODEAB
To use electrical accessories: ACC position A: •When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button once
ON position B: •When already in the ACC position A and without depressing the brake pedal, press the ENGINE START/STOP button again •When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button twice B
Keeping the vehicle in ACC or the ON position for extended periods of time without turning engine on may discharge the vehicle’s battery .
QUICK TIPS
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

18
Cruise Control* Audio Controls
CRUISE
For further audio system operations, refer to pages 19 – 22
Your vehicle’s steering wheel buttons may differ from those in the illustrations. See your Owner’s Manual for more details.
Pressing the Audio MODE button for more than 1 second will turn Audio Mode ON/OFF
QUICK TIP

•Cruise Control is designed to function above approximately 25 mph •The cruise control system will not activate until the brake pedal has been depressed at least once after ignition ON or engine starting
QUICK TIPS
AB
DC
F
G
HE
( Type B)
A Volume button: Press up/down to raise/lower volume
B Seek/Preset button
• Radio Mode: Press to advance through Preset Stations . Press and hold
to Auto Seek
•Media Mode: Press to move Track up/down . Press & hold to FF/REW
C Audio MODE button: Press to cycle through FM/AM/SiriusXM®/CD/MP3/
USB/iPod®/Aux /Bluetooth® Audio* modes
D MUTE button: Press to mute all audio
E CRUISE Control On/Off button: Press to turn the Cruise Control
system On/Off
F Resume Cruising Speed button: Press up to resume or increase
Cruising Speed
G Set Cruising Speed button: Press down to set or decrease
Cruising Speed
H Cruise Control CANCEL button: To cancel Cruise Control, do one
of the following:
•Press the brake pedal
•Press the CANCEL button
REMINDER: Standard Cruise Control is a part of the Smart Cruise Control System (SCC) and can be set as the operating mode . To switch from SCC to Standard Cruise Control, press and hold the CRUISE button (the SCC system must not be activated to change modes) . Repeat to switch back to SCC mode .
Driving while distracted is dangerous and should be avoided. Drivers should remain attentive to driving and always exercise caution when using the steering-wheel-mounted controls while driving.
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
STEERING WHEEL CONTROLS

22
Your vehicle’s audio system may differ from that in the illustration. For further operational information, refer to the Car Multimedia System User’s Manual. For other audio system operations, refer to pages 19-21 or your Owner’s Manual.
UVO eServices with Navigation*
– FM/AM/SiriusXM®/Media (CD, MP3, USB, iPod, Aux, Bluetooth® Audio, My Music)
UVO eServices Registration/Activation – To use
UVO eServices:
1 . On your Smartphone, go to an app store or marketplace
to download the UVO eServices App and log in to the
app using your MyUVO .com account credentials
2 . Register through your UVO eServices App or at
MyUVO .com account
3 . Follow the Apps phone pairing and activation steps
To adjust the sound settings (fader, balance, treble,
mid, bass, volume ratio), press the SETUP button and
select the on-screen SOUND button . Then select which
sound to adjust . Press the on-screen arrows and DONE
to save settings .

•When using the voice command feature, wait for the system BEEP before speaking the command •Prolonged use of the navigation system in ACC mode may drain the vehicle’s battery . A warning screen may appear periodically to remind users that the navigation system should be operated with the engine running to prevent battery discharge
QUICK TIPS
Navigation Audio System Videos To view these videos on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KUTechVideos.com/audio/navigation
QR CODE
MAP
Bluetooth®VOL
POWER
ROUTE MAP
VOICE
TUNE
FILE
PUSH
SEEK
PHONESETUP
S AT
FM/AM
CD-IN
DEST
MEDIA
TRACK
Press to display the Map screen for the current position/ Voice modePress to display destination menu screen
Press to display ROUTE menu screen
Press to display SE TUP mode
Press to enter PHONE Mode
Press to Power ON/OFF . Rotate to adjust Volume
Press to select previous/next Radio/SiriusXM® Stations/Media tracks/files. Press and hold to move quickly through stations/tracks/files
Press to select FM/AM modes
Press to eject Disc
Insert Disc
Press to select SiriusXM® modes
Press to select MEDIA modes
Press to enter Clock Setup mode
Rotate to change Radio/SiriusXM® Stations/Media tracks/files
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
AUDIO SYSTEMS

23
Aux/USB/iPod® Port & Power Outlets
The AUX/USB/iPod® ports can be used to connect audio devices,
smartphones, MP3 players and an iPod® . The Power Outlets are
for 12V electric accessories .
Press the DONE button* on the navigation screen to ensure changes are saved .
QUICK TIP
The power outlets are inactive when ignition is in the OFF position .
QUICK TIP
Digital Clock
Standard Audio System* Clock Setup:
1 . With audio system on: Press the SETUP/CLOCK button A until the clock adjustment mode displays
2 . Rotate knob B to set the Clock, then press to save
setting
UVO eServices System* Clock Setup:
Press the CLOCK button to display the Clock Setting screen .
Then use the on-screen buttons to navigate through setup .
UVO eServices with Navigation* Clock Setup:
Press the SETUP button and select the on-screen CLOCK button and then
TIME to display the Clock Setting screen . Then use the on-screen buttons
to adjust time . Press DONE to save settings .
A
B
REMINDER: Using the power outlets and AUX /USB/iPod® ports for prolonged periods of time with the ignition / ENGINE START/STOP button in the ACC or ON position (Engine OFF ) could cause the battery to discharge .
For more information on the Aux/USB/iPod® Ports and Power Outlets, refer to the Owner's Manual.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL

26
135R
6
4
2
N
When shifting into gears 1-6, the Shift Lever can be moved without pulling the Shift Lever button .
135R
6
4
2
N
QUICK TIP
AB
EDC
Manual Gear Shift*
Starting the Engine
1 . Apply Parking Brake A
2 . Depress Clutch fully B
3 . Shift into Neutral C
4 . Turn ignition to START
Shifting into Reverse
1 . Depress Clutch fully B
2 . Shift into Neutral C
3 . Press the Shift Lever button D
4 . Shift into Reverse E
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
CENTER PANEL

29
HOLD
The Smart Key’s signal can be blocked by the normal operation of a cell or smart phone . To help prevent this, store each device separately .
QUICK TIP
Engine Start/Stop Button and Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODE
A
B
C
D
E
F
G
H
Smart Key*
Smart Key Fob:
A Press to lock all Doors
B Press to unlock Driver’s Door . Press twice in 4 seconds to unlock all Doors
C Press and hold to unlock Trunk /Rear Hatch* and manually open
REMINDER: The Trunk /Rear Hatch* unlocks when the Smart Key fob is within close proximity of the vehicle .
D Press and hold more than 1 second for Panic Alarm . To turn off Alarm, press any button
E Press to release Mechanical Key (button located on reverse side)
F Mechanical Key
REMINDERS:
• If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to the ENGINE START/STOP button (Lock button side closest) and press to start engine
•Remote button configuration may vary depending on vehicle options
Driver’s Door Lock/Unlock button G:
To unlock door(s):
•Press button once to unlock Driver’s door
•Press again within 4 seconds to unlock all doors
•Press again to lock all doors
Mechanical Key H:
•Press button on back of key fob to release Mechanical Key
•Use to unlock driver’s door
•Use to enable/disable Child Safety Locks
•Use to lock glove box
For more information on the Mechanical Key, please refer to your Owner’s Manual.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
OTHER KEY FEATURES

30
LockUnlockDouble-Turn Lock / Unlock All*
(Only available with Power Door Locks)
•Turn clockwise once to unlock Driver’s Door
•Turn clockwise again within 4 seconds to unlock all Doors
•Turn counterclockwise once to lock all Doors
HOLD
One Click Fuel Cap Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODE
A
B
C
D
Remote Keyless Entry
(Folding Key)*
A Press the release button to
unfold the key
B Press to Lock all Doors
C Press to unlock Driver’s Door
Press twice in 4 seconds to
unlock all Doors and Trunk /
Rear Hatch*
D Press and hold to unlock Trunk /
Rear Hatch* and manually open
REMINDER: Remote button configuration may vary depending on vehicle options .
Fuel Cap / Malfunction
Indicator (Check Engine Light)
Tighten for ONE CLICK to prevent Malfunction
Indicator from illuminating .
REMINDER: The Fuel Filler Door Release lever is located on the lower part of the driver’s door sill .
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
OTHER KEY FEATURES

31
(Lever located on the driver’s floor near door sill)
B
C
D
(Lever located near floor below Driver’s Panel)
(Latch located inside hood)
A
Hood Release Lever and Latch
Opening the Hood:
1 . Pull the Hood Release Lever A to unlatch
the Hood
2 . In the front of the vehicle, lift the Hood
slightly, push the secondary Latch B to
the left inside of the hood’s center and lift
the hood
3 . Pull out the support rod from the Hood and
set into place to hold the Hood open
Fuel Door Release Lever
Lift the lever C upwards to release
the fuel door .
Trunk Release Lever
(4-door model)
Lift the lever D upwards to unlock
the trunk lid .
Sunvisor
Use the Sunvisor to shield direct light through the front or side
windows . Slide the Sunvisor out and adjust as needed .
REMINDERS:
•Sunvisor may not shield all direct light
• The Sunvisor may impair visibility if not adjusted properly . Do not operate the vehicle if Sunvisor is impairing your visibility
• Be aware of seating position when adjusting or swinging Sunvisor around to or from the front or side windows .
REMINDER: Open the Hood only after turning the engine off, on a flat surface, with the gear shift in P (Park) position and setting the parking brake .
Closing the Hood:
Lower the Hood about halfway and then press down to securely lock
in place .
REMINDER: While lowering and closing, keep hands away from under the Hood .
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
OTHER KEY FEATURES