2017 KIA OPTIMA PLUG-IN HYBRID display

(Continued)
0+'-
8.Leaving a parking space near awallWhen leaving a parking spacethat is narrow and near a wall,the system may not work prop‐erly. When leaving a parkingspace similar to the above pic‐ture, the driver must watch outfor obstacles while leaving.
How the system works (Parking
Mode)
1. Activate the Smart Parking AssistSystem
The shift lever should be placed in
D (Drive), N (Neutral, above
5 km/h). 2. Select parking mode
3. (Optional) Search for parking space
(slowly move forward.)
4. (Optional) Search complete (auto‐ matic search by sensor.)
5. Steering wheel control 1. Shift according to the instructionon the LCD display.
2. Drive slowly with the brake pedal applied.
6. Parking complete
7. If necessary, manually adjust posi‐ tion of vehicle.
If the system already recognized park‐ ing space before activating the Smart
Parking Assist System, you can proceed
from step 4 (Search complete).
NOTICE
•Before activating the system
check if the conditions are possible
to use the system.
•For your safety, always apply the
brake pedal except for when driv‐
ing.
1. Activate Smart Parking Assist
System
0+'-
• Press the Smart Parking Assist Sys‐ tem button (the button indicator will
illuminate).
• The Parking Assist System will be ac‐ tivated.
A warning sound will be heard if an
obstacle is detected.
• Press the Smart Parking Assist Sys‐ tem button
again for more than 2
seconds to turn off the system.
• The Smart Parking Assist System de‐ faults to the OFF position whenever
the ignition switch is turned on.
Features of your vehicle
5-100

3. Check surroundings
4. Steering wheel control1. Shift according to the instructionon the LCD display.
2. Drive slowly with the brake pedal applied.
5. Exiting complete If necessary, manually adjust the
position of the vehicle.
NOTICE
•Before activating the system
check if the conditions are possible
to use the system.
•For your safety, always apply the
brake pedal except for when driv‐
ing.
1. Activate Smart Parking Assist
System
0+'-
• Press the Smart Parking Assist Sys‐ tem button (the button indicator will
illuminate).
• The Parking Assist System will be ac‐ tivated.
A warning sound will be heard if an
obstacle is detected.
• Press the Smart Parking Assist Sys‐ tem button again for more than 2
seconds to turn off the system.
• The Smart Parking Assist System de‐ faults to the OFF position wheneverthe ignition switch is turned on.
2. Select Exit Mode
-FGU
TJEF 
1BSBMMFM
FYJU3JHIU
TJEF 
1BSBMMFM
FYJU
0+'-0+'-
• Select the mode by pressing the Smart Parking Assist System button
with the shift lever in P (Park) or N (Neutral) and the brake pedal de‐
pressed.
• For LHD vehicle, the left side parallel mode is selected automatically when
the Smart Parking Assist System is
activated.
• For LHD vehicle, to select the right side parallel mode press the Smart
Parking Assist System button once
more.
• If the button is pressed again, the system will turn off.

5-107
5
Features of your vehicle

REARVIEW CAMERA (IF EQUIPPED)
0+')
The rearview camera will activate when
the back-up light is ON with the ignition switch ON and the shift lever in the R
(Reverse) position. This system is a supplemental system
that shows behind the vehicle through the rearview display mirror while back‐
ing up.
WARNING
•This system is a supplementaryfunction only. It is the responsibili‐ty of the driver to always checkthe inside/outside rearview mirrorand the area behind the vehiclebefore and while backing up be‐cause there is a dead zone thatcan't be seen by the camera.
•Always keep the camera lensclean. If the lens is covered withforeign matter, the camera maynot operate normally.
❈ If your vehicle is equipped with AVN
(Audio, Video and Navigation) sys‐
tem, rearview display will show be‐
hind the vehicle through the AVN
monitor while backing up. Refer to
a separately supplied manual for
detailed information.
Features of your vehicle
5-112

Automatic heating and air
conditioning
0+'
1. Press the AUTO button. The modes,fan speeds, air intake and air-con‐
ditioning will be controlled auto‐
matically according to the temper‐
ature setting.
%SJWFSLÓT
TJEF1BTTFOHFSLÓT
TJEF
0+'
2. Turn the temperature control knob to the desired temperature.
NOTICE
•To turn the automatic operation
off, select any button or switch
of the following:
-Mode selection button
-Air conditioning button
(Continued)
(Continued)
-Front windshield defroster
button (Press the button one
more time to deselect the
front windshield defroster
function. The 'AUTO' sign will
illuminate on the information
display once again.)
-Air intake control button
-Fan speed control button
The selected function will be
controlled manually while the
other functions operate auto‐
matically.
•For your convenience and to im‐
prove the effectiveness of the
climate control, use the AUTO
button and set the temperature
to 22°C/71°F (for Europe) or
23°C/73°F (for Except Europe).
Features of your vehicle
5-138

Climate information screen
selection (if equipped)
Press the climate information screen
selection button to display climate in‐ formation on the screen.
Driver Only
If you press the DRIVER ONLY button
and the indicator light illuminates, cold air mostly blows in the direction of the
driverL

(For European region)
Step 1: Blowing air flow toward thewindshield
Step 2: Increasing air flow toward the windshield
Step 3: Operating the air condition‐ ing.
Step 4: Outside air position
(For except European region)
Step 1: Outside air position
Step 2: Operating the air condition‐ ing.
Step 3: Blowing air flow toward the windshield
Step 4: Increasing air flow toward the windshield
To cancel or reset the AutoDefogging System
Press the front windshield defroster
button for 3 seconds when the ignition
switch is in the ON position.
When the Auto Defogging System is canceled, ADS OFF symbol will blink 3
times and the ADS OFF will be displayed
on the climate control information screen.
When the Auto Defogging System is re‐
set, ADS OFF symbol will blink 6 times
without a signal.
Features of your vehicle
5-148

(Continued)
•The wireless charging will stopwhen using the wireless smart keysearch function to prevent radiowave disruption.
•The wireless charging will stopwhen the smart key is moved outof the vehicle with the ignition inON.
•The wireless charging will stopwhen any of the doors is opened(applicable for vehicles equippedwith smart keys).
•The wireless charging will stopwhen the vehicle is turned OFF.
•The wireless charging will stopwhen the smart phone is not incomplete contact with the wirelesscharging pad.
•Items equipped with magneticcomponents such as credit card,telephone card, bankbook, anytransportation ticket and suchmay become damaged duringwireless charging.
(Continued)
(Continued)
•Place the smart phone on the cen‐ter of the charge pad for best re‐sults. The smart phone may notcharge when placed near the rimof the charging pad. When thesmart phone does get charged, itmay heat up excessively.
•For smart phones without built inwireless charging system, an ap‐propriate accessory has to beequipped.
•Smart phones of some manufac‐turers may display messages onweak current. This is due to theparticular characteristic of thesmart phone and does not imply amalfunction on wireless chargingfunction.
•The indicator light of some manu‐facturers’ smart phones may stillbe yellow after the smart phone isfully charged. This is due to theparticular characteristic of thesmart phone and not a malfunc‐tion of the wireless charging.
(Continued)
(Continued)
•When any smart phone without awireless charging function or ametallic object is placed on thecharging pad, a small noise maysound. This small sound is due tothe vehicle discerning compatibilityof the object placed on the charg‐ing pad. It does not affect your ve‐hicle or the smart phone in anyway.
Clothes hanger (if equipped)
0+'
❈The actual feature may differ from
the illustration.
Features of your vehicle
5-160

- çress the button: çreviewseach broadcast for 5 secondseach.
• CD, UêB, My Music *
mode
- çress the button: çreviews each song (file) for 10 secondseach.
- çress the button again to con‐ tinue listening to the currentsong (file).
10.
• êhortly press the button: Moves to the Display, êound, Clock, çhone, êystem setting modes.
• çress and hold the button: Move to the Time setting screen.
11.
MENU
• Displays menus for the current mode.
• içod ®
List: Move to parent cate‐
gory.
12.
FOLDER
• Mç3 CD / UêB mode: Folder êearch.
13.
TUNE knob
• éadio mode: Changes frequency by turning the knob left/right.
* if equipped •
CD, UêB, içod ®
, My Music *
mode:
êearches songs (files) by turning the knob left/right.
When the desired song is dis‐
played, press the knob to playthe song.
• Moves focus in all selection me‐ nus and selects menus.
14.FM (Type A-4)
• Changes to FM mode.
• Each time the button is pressed, the mode changed in order of FM1
FM2.
15.
AM (Type A-4)
• Changes to AM mode.
* if equipped
Before using the audio system
NOTICE
nUsing the Discs
•If the temperature inside the car is
too high, open the car windows to
ventilate before using the system.
•It is illegal to copy and use
Mç3/WMA files without permis‐
sion. Use CDs that are created only
by lawful means.
•Do not apply volatile agents, such
as benzene and thinner, normal
cleaners and magnetic sprays
made for analogue disc onto CDs.
•To prevent the disc surface from
getting damaged, hold CDs by the
edges or the center hole only.
•Clean the disc surface with a piece
of soft cloth before playback (wipe
it from the center to the outside
edge).
(Continued)
Audio system
6-12