2017 KIA OPTIMA PLUG-IN HYBRID steering wheel

CAUTION
•Do not strike the horn severely tooperate it, or hit it with your fist.Do not press on the horn with asharp-pointed object.
•When cleaning the steering wheel,do not use an organic solvent suchas thinner, benzene, alcohol andgasoline. Doing so may damagethe steering wheel.

5-43
5
Features of your vehicle

- Distance range: 1 ~ 9,999 km or 1 ~9,999 mi.
NOTICE
•If the vehicle is not on level ground
or the battery power has been in‐
terrupted, the distance to empty
function may not operate correct‐
ly.
•The distance to empty may differ
from the actual driving distance as
it is an estimate of the available
driving distance.
•The trip computer may not regis‐
ter additional fuel if less than
6 liters (1.6 gallons) of fuel are
added to the vehicle.
•The fuel economy and distance to
empty may vary significantly
based on driving conditions, driving
habits, and condition of the vehi‐
cle.
Average Fuel Economy (2)
• The average fuel economy is calcula‐ ted by the total driving distance and
fuel consumption since the last aver‐ age fuel economy reset. - Fuel economy range: 0.0 ~ 99.9
km/L, L/100 km or MPG
• The average fuel economy can be re‐ set both manually and automatically.
Manual reset
To clear the average fuel economy
manually, press the OK button (reset) on the steering wheel for more than 1
second when the average fuel economy
is displayed.
Automatic reset
To make the average fuel economy be reset automatically whenever refueling,
select the L

Trip A/B
0+'-
Tripmeter (1)
• The tripmeter is the total driving dis‐ tance since the last tripmeter reset.- Distance range: 0.0 ~ 9999.9 km or mi.
• To reset the tripmeter, press the OK button (reset) on the steering wheelfor more than 1 second when the
tripmeter is displayed.
Average Vehicle Speed (2)
• The average vehicle speed is calcula‐ ted by the total driving distance and
driving time since the last average
vehicle speed reset. - Speed range: 0 ~ 260 km/h or 0 ~
160 mph
• To reset the average vehicle speed, press the OK button (reset) on the
steering wheel for more than 1 sec‐
ond when the average vehicle speed
is displayed.
NOTICE
•The average vehicle speed is not
displayed if the driving distance
has been less than 50 meters
(0.03 miles) or the driving time
has been less than 10 seconds
since the ignition switch or Engine
Start/Stop button was turned to
ON.
•Even if the vehicle is not in motion,
the average vehicle speed keeps
calculating, as long as while the
engine is running.
Elapsed Time (3)
• The elapsed time is the total driving time since the last elapsed time re‐
set. - Time range (hh:mm): 00:00 ~ 99:59 • To reset the elapsed time, press the
OK button (reset) on the steering
wheel for more than 1 second when
the elapsed time is displayed.
NOTICE
Even if the vehicle is not in motion,
the elapsed time keeps calculating,
as long as the engine is running.
Digital speedometer
This mode displays the current speed
of the vehicle.
Features of your vehicle
5-66

• At this time, the Engine Start/StopButton turns to the ACC position (If
you press the Engine Start/Stop But‐ ton once more, it will turn to the ON
position).
Low key battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lock
when the Engine Start/Stop Button changes to the OFF position.
Check steering wheel lock system
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop
Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates if the smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if the smart key is not detected when
you press the Engine Start/Stop But‐
ton.
Press start button again (for smart
key system)
• This warning message illuminates if you cannot operate the Engine Start/
Stop Button when there is a problem with the Engine Start/Stop Button
system.
• It means that you could start the en‐ gine by pressing the Engine Start/
Stop Button once more.
• If the warning illuminates each time you press the Engine Start/Stop But‐ton, we recommend that you have
the vehicle inspected by an author‐
ized Kia dealer.
Press start button with key (for
smart key system)
• This warning message illuminates if you press the Engine Start/Stop But‐
ton while the warning message L

Icy road warning light (if equipped)
0+'-
This warning light is to warn the driver
the road may be icy.
When the following conditions occur, the warning light (including Outside
Temperature Gauge) blinks 5 times and
then illuminates, and also warning chime sounds once.
- The temperature on the Outside
Temperature Gauge is below approxi‐
mately 4°C (40°F).
NOTICE
If the icy road warning light appears
while driving, you should drive more
attentively and safely refraining
from over-speeding, rapid accelera‐
tion, sudden braking or sharp turn‐
ing, etc.
Align steering wheel
• This warning message illuminates if you start the engine when the steer‐
ing wheel is turned to more than 90 degrees to the left or right.
• It means that you should turn the steering wheel and make the angle of
the steering wheel be less than 30
degrees.
Low washer fluid (if equipped)
• This warning message illuminates on the service reminder mode if the
washer fluid level in the reservoir is nearly empty.
• It means that you should refill the washer fluid.
Turn on FUSE SWITCH (if equipped)
• This warning message illuminates if the fuse switch under the steeringwheel is OFF.
• It means that you should turn the fuse switch on.
For more details, refer to L

SMART PARKING ASSIST SYSTEM (SPAS) (IF EQUIPPED)
1BSBMMFM
QBSLJOH
0+'-
3FWFSTF
QBSLJOH
0+'-
1BSBMMFM
FYJU
0+'-
The Smart Parking Assist System helps
drivers park their vehicle by using sen‐ sors to measure parking spaces, control
the steering wheel to semi-automati‐
cally park the vehicle and provide in‐ struction on the LCD display to help
through parking.
Additionally, the system provides assis‐
tance when leaving (parallel exit) a parking space. ❈ The volume for the Smart Parking
Assist System can be adjusted. Re‐
fer to L

(Continued)
0+'-
8.Leaving a parking space near awallWhen leaving a parking spacethat is narrow and near a wall,the system may not work prop‐erly. When leaving a parkingspace similar to the above pic‐ture, the driver must watch outfor obstacles while leaving.
How the system works (Parking
Mode)
1. Activate the Smart Parking AssistSystem
The shift lever should be placed in
D (Drive), N (Neutral, above
5 km/h). 2. Select parking mode
3. (Optional) Search for parking space
(slowly move forward.)
4. (Optional) Search complete (auto‐ matic search by sensor.)
5. Steering wheel control 1. Shift according to the instructionon the LCD display.
2. Drive slowly with the brake pedal applied.
6. Parking complete
7. If necessary, manually adjust posi‐ tion of vehicle.
If the system already recognized park‐ ing space before activating the Smart
Parking Assist System, you can proceed
from step 4 (Search complete).
NOTICE
•Before activating the system
check if the conditions are possible
to use the system.
•For your safety, always apply the
brake pedal except for when driv‐
ing.
1. Activate Smart Parking Assist
System
0+'-
• Press the Smart Parking Assist Sys‐ tem button (the button indicator will
illuminate).
• The Parking Assist System will be ac‐ tivated.
A warning sound will be heard if an
obstacle is detected.
• Press the Smart Parking Assist Sys‐ tem button
again for more than 2
seconds to turn off the system.
• The Smart Parking Assist System de‐ faults to the OFF position whenever
the ignition switch is turned on.
Features of your vehicle
5-100

• The system will be cancelled if youfirmly hold the steering wheel while it
is controlled automatically.
• The system will be cancelled if vehicle speed is over 7 km/h (4.3 mph).
WARNING
Do not put your hands between thesteering wheel while it is being auto‐matically controlled.
CAUTION
•Always drive slowly with the brakepedal applied.
•Always check for objects aroundyour vehicle before driving.
•If the vehicle does not move eventhough the brake pedal is not de‐pressed, check the surroundingbefore depressing the acceleratorpedal. Be sure not to speed over7 km/h (4.3 mph).
NOTICE
•If you do not follow the instruc‐
tions provided, you may fail to
park your vehicle.
However, if the Parking Assist Sys‐
tem warning sound (distance from
object is within 30 cm: continuous
beep) occurs, slowly drive the ve‐
hicle to the reverse direction of
the detected object after checking
the surrounding.
•Always check the surrounding be‐
fore driving your vehicle if the
Parking Assist System warning
sound (distance from object is
within 30 cm: continuous beep) is
heard for the object is close to
your vehicle. If the vehicle gets too
close to the object, the warning
will not sound.
To cancel the system while parking
• Press the Smart Parking Assist Sys‐ tem button and hold until the system
is cancelled.
• Press long the Smart parking assist system button while the system is
searching for a parking space. • Press shortly the Smart parking as‐
sist system button while the steering
wheel is controlled.
Gear shift while steering wheel control
.BOVBM
USBOTBYMF
0+'- 0+'-
"VUPNBUJD
USBOTBYMF
0+'- 0+'-
When the above message appears with
a beep sound, shift the gear and drive the vehicle with the brake pedal de‐
pressed.
Features of your vehicle
5-104