2017 KIA OPTIMA PLUG-IN HYBRID belt

WARNING
•No modifications or additionsshould be made by the user whichwill either prevent the seat beltadjusting devices from operatingto remove slack, or prevent theseat belt assembly from being ad‐justed to remove slack.
•When you fasten the seat belt, becareful not to latch the seat belt inbuckles of other seat. It's verydangerous and you may not beprotected by the seat belt proper‐ly.
•Do not unfasten the seat belt anddo not fasten and unfasten theseat belt repeatedly while driving.This could result in loss of control,and an accident causing death, se‐rious injury, or property damage.
•When fastening the seat belt,make sure that the seat belt doesnot pass over objects that are hardor can break easily.
•Make sure there is nothing in thebuckle. The seat belt may not befastened securely.
Seat belt warning
Driver's seat belt warning
0+'-
As a reminder to the driver, the seat
belt warning light will illuminate and warning chime will sound for approxi‐
mately 6 seconds each time you turn
the Engine Start/Stop button ON if the seat belt is unfastened.
If you continue not to fasten the seat
belt and you drive over 9 km/h, the
warning light will stay illuminated until you drive under 6 km/h. (if equipped) If you continue not to fasten the seat
belt and you drive over 20 km/h the
seat belt warning chime will sound for approximately 100 seconds and the
corresponding warning light will blink.
(if equipped)
If you unfasten the seat belt while driv‐ ing under 20 km/h, the seat belt warn‐
ing light will illuminate until the seat
belt is fastened.
If you unfasten the seat belt while driv‐ ing over 20 km/h, the seat belt warning
chime will sound for approximately 100
seconds and the corresponding warning light will blink.

4-19
4
Safety features of your vehicle

Front passenger's seat belt warning (if
equipped)
0+'-
As a reminder to the front passenger,
the front passenger’s seat belt warning lights will illuminate for approximately
6 seconds each time you turn the En‐
gine Start/Stop button ON regardless of belt fastening.
If you continue not to fasten the seat
belt and you drive over 9 km/h, the
warning light the warning light will stay illuminated.
If you unfasten the seat belt while driv‐
ing in case of under 20 km/h the seat
belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driv‐
ing over 20 km/h, the seat belt warning
chime will sound for approximately 100 seconds and the corresponding warning
light will blink.
Rear passenger's seat belt warning (if
equipped)
0+'-
When the IGN is in ON, or the engine is
running, the seat belt warning light will illuminate for approximately 6 seconds.
The light will illuminate regardless of
whether the seat belt is worn or not. And then, the rear corresponding seat
belt warning light will illuminate for ap‐
proximately 35 seconds, if you drive
over 9 km/h when the rear belt is not fastened.
This warning operates only once from
start to off the vehicle.
However, the seat belt warning light
will illuminate again for approximately 35 seconds, if you drive under 9 km/h
for about 29 minutes more.
If you unfasten the seat belt while driv‐
ing under 20 km/h the seat belt warn‐ ing light will illuminate for approxi‐
mately 35 seconds.
If you unfasten the seat belt while driv‐
ing over 20 km/h, the seat belt warning chime will sound for approximately 35
seconds and the corresponding warning
light will blink.
Safety features of your vehicle
4-20

Lap/shoulder belt
Height adjustment
¥
'SPOU
TFBU0+'
You can adjust the height of the shoul‐
der belt anchor to one of 4 positions for
maximum comfort and safety.
The height of the adjusting seat belt should not be too close to your neck.
You will not be getting the most effec‐
tive protection. The shoulder portion should be adjusted so that it lies across
your chest and midway over your
shoulder near the door and not your neck.
To adjust the height of the seat belt
anchor, lower or raise the height ad‐
juster into an appropriate position. To raise the height adjuster, pull it up
(1). To lower it, push it down (3) while
pressing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height ad‐ juster to make sure that it has locked
into position.
WARNING
•Verify the shoulder belt anchor islocked into position at the appro‐priate height. Never position theshoulder belt across your neck orface. Improperly positioned seatbelts can cause serious injuries inan accident.
•Failure to replace seat belts afteran accident could leave you withdamaged seat belts that will notprovide protection in the event ofanother collision leading to person‐al injury or death. Replace yourseat belts after being in an acci‐dent as soon as possible.
To fasten your seat belt:
#"/'
To fasten your seat belt, pull it out of
the retractor and insert the metal tab (1) into the buckle (2). There will be an
audible "click" when the tab locks into
the buckle.
The seat belt automatically adjusts to the proper length only after the lap
belt portion is adjusted manually so
that it fits snugly around your hips. If you lean forward in a slow, easy mo‐
tion, the belt will extend and let you
move around. If there is a sudden stop or impact, however, the belt will lock in‐
to position. It will also lock if you try to
lean forward too quickly.

4-21
4
Safety features of your vehicle

NOTICE
If you are not able to pull out the
seat belt from the retractor, firmly
pull the belt out and release it. Then
you will be able to pull the belt out
smoothly.
#"/'
WARNING
You should place the lap belt portionas low as possible and snugly acrossyour hips, not on your waist. If thelap belt is located too high on your
(Continued)
(Continued)
waist, it may increase the chance ofinjury in the event of a collision. Botharms should not be under or overthe belt. Rather, one should be overand the other under, as shown in theillustration.Never wear the seat belt under thearm near the door.
0+'-
0+'-
Pull the metal tab (3) and insert it (3)
into the buckle (4). There will be an au‐ dible L

When using the rear center seat belt
the buckle with the L

-Retractor Pretensioner
The purpose of the retractor preten‐
sioner is to make sure that the shoul‐
der belts fit in tightly against the oc‐ cupant's upper body in certain frontal
collisions.
If the system senses excessive tension
on the driver seat belt when the pre- tensioner system activates, the load
limiter inside the retractor pretensioner
will release some of the pressure on the affected seat belt. (if equipped)
NOTICE
The pre-tensioner will activate not
only in a frontal collision but also in a
side collision, if the vehicle is equip‐
ped with a side or curtain air bag.
WARNING
For your safety, be sure that thebelt webbing is not loose or twistedand always sit properly on your seat.
NOTICE
nif equipped with rollover sen‐
sor
The pre-tensioner will activate not
only in a frontal collision but also in a
side collision or rollover, if the vehicle
is equipped with a side or curtain air
bag.
NOTICE
nwithout rollover sensor
The pre-tensioner will activate not
only in a frontal collision but also in a
side collision, if the vehicle is equip‐
ped with a side or curtain air bag.
The seat belt pre-tensioner system
consists mainly of the following compo‐
nents. Their locations are shown in the
illustration: 1. SRS air bag warning light
2. Front retractor pre-tensioner as‐ sembly
3. SRS control module
WARNING
To obtain maximum benefit from apre-tensioner seat belt:
(Continued)
Safety features of your vehicle
4-24

(Continued)
1.The seatbelt must be worn cor‐rectly and adjusted to the properposition. Please read and followall of the important informationand precautions about your vehi‐cle’s occupant safety features –including seat belts and air bags– that are provided in this man‐ual.
2.Be sure you and your passen‐gers always wear seat beltsproperly.
NOTICE
•Pre-tensioner seat belts will be
activated in certain frontal colli‐
sions. The pre-tensioner seat
belts can be activated, where the
frontal collision is severe enough,
together with the air bags.
(Continued)
(Continued)
•When the pre-tensioner seat belts
are activated, a loud noise may be
heard and fine dust, which may
appear to be smoke, may be visi‐
ble in the passenger compart‐
ment. These are normal operating
conditions and are not hazardous.
•Although it is harmless, the fine
dust may cause skin irritation and
should not be breathed for pro‐
longed periods. Wash all exposed
skin areas thoroughly after an ac‐
cident in which the pre-tensioner
seat belts were activated.
•Because the sensor that activates
the SRS air bag is connected with
the pre-tensioner seat belt, the
SRS air bag warning light on the
instrument panel will illuminate for
approximately 6 seconds after the
Engine Start/Stop button has been
turned to the "ON" position, and
then it should turn off.
CAUTION
If the pre-tensioner seat belt is notworking properly, the SRS air bagwarning light will illuminate even ifthere is no malfunction of the SRSair bag. If the SRS air bag warninglight does not illuminate when theEngine Start/Stop button is turnedto ON, or if it remains illuminated af‐ter illuminating for approximately 6seconds, or if it illuminates while thevehicle is being driven, we recom‐mend that the system be inspectedby an authorized Kia dealer.
WARNING
•Pre-tensioners are designed to op‐erate only one time. After activa‐tion, pre-tensioner seat beltsmust be replaced. All seat belts, ofany type, should always be re‐placed after they have been wornduring a collision.
(Continued)

4-25
4
Safety features of your vehicle

(Continued)
•The pre-tensioner seat belt as‐sembly mechanisms become hotduring activation. Do not touch thepre-tensioner seat belt assembliesfor several minutes after theyhave been activated.
•Do not attempt to inspect or re‐place the pre-tensioner seat beltsyourself. We recommend that thesystem be inspected by an author‐ized Kia dealer.
•Do not strike the pre-tensionerseat belt assemblies.
•Do not attempt to service or repairthe pre-tensioner seat belt sys‐tem in any manner.
•Improper handling of the preten‐sioner seat belt assemblies, andfailure to heed the warnings not tostrike, modify, inspect, replace,service or repair the pre-tensionerseat belt assemblies may lead toimproper operation or inadvertentactivation and serious injury.
•Always wear the seat belts whendriving or riding in a motor vehicle.
(Continued)
(Continued)
•If the vehicle or pre-tensioner seatbelt must be discarded, we recom‐mend that you contact an author‐ized Kia dealer.
CAUTION
Body work on the front area of thevehicle may damage the pretension‐er seat belt system. Therefore, werecommend that the system beserviced by an authorized Kia dealer.
Seat belt precautions
WARNING
All occupants of the vehicle mustwear their seat belts at all times.Seat belts and child restraints re‐duce the risk of serious or fatal inju‐ries for all occupants in the event ofa collision or sudden stop. Without aseat belt, occupants could be shiftedtoo close to a deploying air bag,strike the interior structure or be
(Continued)
(Continued)
thrown from the vehicle. Properlyworn seat belts greatly reduce thesehazards.Always follow the precautions aboutseat belts, air bags and occupantseating contained in this manual.
Infant or small child
You should be aware of the specific re‐quirements in your country. Child
and/or infant seats must be properly
placed and installed in the rear seat. For more information about the use of
these restraints, refer toL