Page 389 of 516

low end of the indicated range will result in the oil level at
the full end of the indicator range.
CAUTION!
Do not overfill the engine with oil. Overfilling the
engine with oil will cause oil aeration, which can lead
to loss of oil pressure and an increase in oil tempera-
ture. This loss of oil pressure and increased oil tem-
perature could damage your engine.
Change Engine Oil — Gasoline Engine
Refer to the “Scheduled Servicing” in this section for the
proper maintenance intervals.
NOTE:Under no circumstances should oil change inter-
vals exceed 10,000 miles (16,000 km), twelve months or 350
hours of engine run time, whichever comes first. The 350
hours of engine run or idle time is generally only a concern
for fleet customers.
Engine Oil Selection — 1.4L Turbo Engine
For best performance and maximum protection for turbo-
charged engines under all types of operating conditions, the manufacturer recommends synthetic engine oils that
are API Certified and meet the requirements of FCA
Material Standard MS-12991.
Engine Oil Selection — 2.4L Engine
For best performance and maximum protection under all
types of operating conditions, the manufacturer only rec-
ommends 0W-20 engine oils that are API Certified and
meet the requirements of FCA Material Standard MS-6395.
Engine Oil Viscosity (SAE Grade) — 1.4L Turbo
Engine
Mopar SAE 5W-40 synthetic engine oil approved to FCA
Material Standard MS-12991 such as Pennzoil, Shell Helix
or equivalent is recommended for all operating tempera-
tures. This engine oil improves low temperature starting
and vehicle fuel economy.
The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on
engine oil filler cap location, refer to “Engine Compart-
ment” in this section.
Lubricants which do not have both the engine oil certifi-
cation mark and the correct SAE viscosity grade number
should not be used.8
SERVICING AND MAINTENANCE 387
Page 390 of 516

Engine Oil Viscosity (SAE Grade) — 2.4L Engine
Mopar SAE 0W-20 engine oil approved to FCA Material
Standard MS-6395 such as Pennzoil, Shell Helix or equiva-
lent is recommended for all operating temperatures. This
engine oil improves low temperature starting and vehicle
fuel economy.
The engine oil filler cap also shows the recommended
engine oil viscosity for your engine. For information on
engine oil filler cap location, refer to “Engine Compart-
ment” in this section.
Lubricants which do not have both the engine oil certifi-
cation mark and the correct SAE viscosity grade number
should not be used.
Materials Added To Engine Oil
The manufacturer strongly recommends against the addi-
tion of any additives (other than leak detection dyes) to the
engine oil. Engine oil is an engineered product and its
performance may be impaired by supplemental additives.
Disposing Of Used Engine Oil And Oil Filters
Care should be taken in disposing of used engine oil and
oil filters from your vehicle. Used oil and oil filters,
indiscriminately discarded, can present a problem to theenvironment. Contact your authorized dealer, service sta-
tion or governmental agency for advice on how and where
used oil and oil filters can be safely discarded in your area.
Engine Oil Filter
The engine oil filter should be replaced with a new filter at
every engine oil change.
Engine Oil Filter Selection
This manufacturer’s engines have a full-flow type dispos-
able oil filter. Use a filter of this type for replacement. The
quality of replacement filters varies considerably. Only
high quality filters should be used to assure most efficient
service. Mopar engine oil filters are high quality oil filters
and are recommended.
Engine Air Cleaner Filter
Refer to the “Maintenance Plan” in this section for the
proper maintenance intervals.
388 SERVICING AND MAINTENANCE
Page 512 of 516

Tilting.................................38
Security Alarm ......................... .28, 138
Arm The System ..........................28
Disarm The System ........................29
Selection Of Coolant (Antifreeze) ...............439
Sentry Key Key Programming .........................27
Sentry Key Replacement ....................21, 27
Service Assistance ......................... .494
Service Contract .......................... .496
Service Manuals .......................... .497
Shifting Manual Transmission ..................... .260
Shift Lever Override ....................... .365
Shoulder Belts ............................ .206
Side View Mirror Adjustment ...................50
Signals, Turn ....................... .55, 160, 247
Snow Chains (Tire Chains) ....................421
Snow Tires .............................. .417
Spare Tire ............................ .418, 419
Spark Plugs ............................. .439
Specifications Fuel (Gasoline) ......................... .439
Oil.................................. .439
Speed Control (Cruise Control) .................272Starting
.............................. .23, 251
Cold Weather .......................... .253
Engine Fails To Start ..................... .252
Remote ................................23
Starting And Operating ..................... .251
Starting Procedures ........................ .251
Steering Tilt Column .............................48
Wheel, Heated ...........................48
Wheel, Tilt ..............................48
Steering Wheel Audio Controls .................476
Steering Wheel Mounted Sound System Controls . . . .476
Storage, Vehicle .............................81
Stuck, Freeing ............................ .366
Sun Visor Extension .........................110
Supplemental Restraint System - Air Bag ..........216
Sway
Control, Trailer .....................171, 297
System, Remote Starting ......................23
Telescoping Steering Column ...................48
Temperature Control, Automatic (ATC) ............79
Tilt Steering Column .........................48
Time Delay, Headlight ........................54
Tip Start ................................ .252
Tire And Loading Information Placard ............407
510 INDEX