2017 INFINITI QX60 HYBRID Quick Reference Guide

6
Meters and Gauges
1 Tachometer
2 Assist charge gauge
3 Shift lever indicator
4 Vehicle information display
5 Speedometer
6 Fuel gauge
For more information, refer to your Owner

7
Adjusting the outside mirrors
•

To adjust the outside mirrors,
move the switch
1 right or left to
select the right or left mirror.
•


Adjust the position of the mirror
using the directional control
switch
2.
Folding the outside mirrors
To fold the mirrors closed, push the
left of the
switch 3. To open the
mirrors, push the right of the
switch 4.
Opening the Liftgate
To open the liftgate:
•


Push the power liftgate switch 1 on the instrument panel.
•


Push the liftgate opener switch 2; the liftgate must be unlocked,
or you must have the Intelligent Key with you (that is, in your
pocket or purse).
•


Press the
button 3 on the Infiniti Intelligent Key for longer
than 1 second.
•


The power liftgate operation can be turned on or off by the power
liftgate main switch
4 on the instrument panel.
MOTION ACTIVATED LIFTGATE
The liftgate can also be opened and closed using a
foot kicking motion when it is locked or unlocked. The
Intelligent Key must be present within 3 ft (1 m) of
the liftgate.
To use this feature, make a single kick motion under
the center of the rear bumper
5 . After the motion is
complete, step back to allow the liftgate to open or close.
Outside Mirrors
1
2
4 3
5
REVERSE TILT-DOWN FEATURE (IF SO EQUIPPED)
When backing up the vehicle, the outside mirrors will turn
downward automatically to provide better rear visibility. To
enable the reverse tilt-down feature, move the switch
1 to
either the left or right position.
If the switch
1 is set it in the center (neutral) position, the
mirror will not tilt down when reversing.
1 2
3
4
For more information, refer to your Owner

8
2nd Row Seats
Forward and backward adjustment:
Pull the center of the bar
1 up and hold it while you slide the seat forward or
backward to the desired position until it latches.
Seat angle adjustment:
Pull up on the lever
2 and lean back. To bring the seatback forward, pull the
lever up and lean your body forward until it latches.
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
On the passenger’s side of the vehicle, the 3
rd row can be accessed without
removing a child seat installed in the 2nd row.
•


Lift up on the seatback release lever 3 and slide the entire seat forward.
•


To return the seat to a locked position, push the upper seatback rearwar\
d
until the seatback and track are locked.
1
2
3
Wiper and Washer Switch
1
2 3
Move the lever 1 up or down to one of the following positions to
operate the windshield wipers:
MIST
One sweep operation
OFF





Wipers are OFF
AUTO



Speed-sensing and rain-sensing (if so equipped) automatic wipe
LO


Continuous wipe, slow
HI


Continuous wipe, fast
To adjust the wiper sensitivity for the

AUTO setting, twist the
control ring
2. The rain-sensing function (if so equipped) can be
disabled in the vehicle information display under “Vehicle Settings”\
.
Pull the lever
1 toward you operate the windshield washer.
Rear wiper and washer
Turn the rear wiper switch
3 to one of the following positions to operate
the rear wiper:


OFF

Wiper is OFF


INT



Intermittent wiping


ON

Continuous wipe, slow
Push the lever
1 forward to operate the rear windshield washer.
For more information, refer to your Owner

9
Dynamic Driver Assistance Switch
(if so equipped)
The Dynamic Driver Assistance Switch 1 can be used to temporarily turn on or
off the following systems:
•


Lane Departure Prevention (LDP): The LDP system helps warns the driver\
with
a warning light and chime and helps assist the driver to return the vehi\
cle to
the center of the traveling lane.
•


Distance Control Assist (DCA): The DCA system helps assist the driver \
to
maintain a following distance from a vehicle ahead by activating the bra\
kes
and moving the accelerator pedal upward to decelerate smoothly.
•


Blind Spot Intervention® (BSI): The BSI system helps alert the driver of other
vehicles in adjacent lanes when changing lanes with a warning light and \
chime. It also helps assist the driver to return to the center of the cu\
rrent
traveling lane when another vehicle is present in the adjacent lane.
1
The USB ports are located in the center console under the armrest 1 ,
and on the back of the center console
2. These ports can be used to
charge compatible USB devices.
•


When a compatible USB memory device or iPod® is plugged into
the USB ports, compatible audio files stored on the device can be
played through the vehicle’s audio system.
USB Connection Ports
1 2
For more information, refer to your Owner

10
Remote Start (if so equipped)1
To start your vehicle remotely, press the
button 1 on the Infiniti Intelligent
Key, and within 5 seconds, press and
hold the remote engine start
button
2 for at least 2 seconds.
•


Automatic climate control will begin
heating or cooling the vehicle based
on the temperature inside and
outside the vehicle.
•


The hybrid system will run for 10
minutes and then turn off. To extend
the time for an additional 10-minute
period, repeat the procedure.
•


To start driving, depress the brake
pedal and press the ignition switch

START/STOP button.
Remote start can be enabled or disabled through the vehicle
information display.
HEATED STEERING WHEEL (if so equipped)
The heated steering wheel may be activated during remote
engine start when outside and cabin temperatures are low.
During remote start, the heated steering wheel switch will be
inoperable until the ignition switch is turned on.
1
2
Automatic Drive Positioner (if so equipped)
2 1
Two positions for the driver’s seat, steering column and outside mirr\
ors can be stored
in the automatic drive positioner memory. To set a memory position:
1.


Push the ignition switch to the ON or ACC position. (The vehicle should\
be stopped
while setting the memory.)
2.


Adjust the driver’s seat, steering column and outside mirrors to the \
desired
positions using the adjusting switches for each feature.
3.


Push the
SET switch
1 , and within 5 seconds, push the memory switch
(1 or 2)
2 . The indicator light for the memory switch you select will illuminate for
approximately 5 seconds and a chime will sound when the memory is stored\
.
4.


Press the unlock button on the key fob to link the memorized position to\
your
Infiniti Intelligent Key.
The driver’s seat and steering column will automatically move when th\
e shift lever
is in the

P (PARK) position to allow the driver to get in and out of the driver’s seat \
more easily. “Exit Seat Slide” and “Exit Steering UP” can be\
disabled in the vehicle
information display under “Vehicle Settings”.
1 For disclaimer, refer to page 17 of this guide.
For more information, refer to your Owner

11
Heater and Air Conditioner (automatic)
• Press the AUTO button 1 to turn the system on and automatically control the
inside temperature.
•


Press the CLIMATE button
2 to adjust the automatic climate controls using the
climate settings on the control panel display screen.
•


Use the driver’s side 3 or passenger’s side 4 control buttons (warmer air) or
(cooler air) to control the desired side’s temperature.
•


Press the air flow control button 5 to manually cycle through the available
air flow modes.
•


Press the DUAL button
6 to turn the system on and off.
•


Press the fan speed control buttons 7 to increase or decrease the fan speed.
•


Press the front defroster button 8 to turn the front defroster system on and off,
and use the temperature control buttons
3 to change the temperature.
•


To defrost the rear window and outside mirrors, press the rear defroster\

switch
9 to turn the system on and off.
1 2
4 3
5 6
7 8109
REAR CONTROLS
•


Press the
REAR ON-OFF button
12 to turn the rear air conditioner on
and off.
•


Press the

OFF button
13 to turn the system off.
•


Adjust the fan speed up or down using the control buttons 14.
•


Press the AUTO button
15 to turn on the automatic mode.
•


Adjust the temperature up or down using the
TEMP buttons
16.
1112
13
15
1416
• Press the intake air control button 10 to recirculate the air inside
the vehicle.
•


Press the OFF button
11 to turn the climate control system off.
For more information, refer to your Owner

12
Connecting your Cellular Phone or
Device via Bluetooth
®,2,3
If you have a compatible Bluetooth® device with streaming audio (A2DP and
AVRCP profiles), you can set up a wireless connection between your Blue\
tooth®
device and the in-vehicle audio system, enabling you to listen to the au\
dio from
your device through the vehicle’s audio system.
After connecting your Bluetooth
® device, press the MEDIA button on the control
panel to switch to Bluetooth® Streaming Audio.
For any Bluetooth® connectivity issues, reboot your cellular phone or device.
Bluetooth® Streaming Audio Voice Recognition
SYSTEM OPERATING TIPS
•


The interior of the vehicle should be as quiet as possible.
•


Speak naturally. Speaking too fast, too slow, too soft, or too loud
makes voice recognition more difficult.
•


Confirm that the correct voice commands are being used. Glance at
the screen to see the currently available commands.
USING THE VOICE RECOGNITION SYSTEM
•


Press the or button 1 on the steering wheel, and a list of
commands will appear on the screen.
•


After the tone sounds, speak the command.
•


To skip the voice prompt and give the command immediately,
press the
or button 1 on the steering wheel to interrupt the
system. Speak the next command after the tone sounds.
•


To cancel the command, press and hold the or button 1 on
the steering wheel.
1
Using Bluetooth® technology, you can
connect (pair) your cellular phone with the
in-vehicle system for hands-free use of your
cellular phone
4.
1.


Press the

SETTING button on the
control panel.
2.


Touch the “Phone/Mail” key.
3. Touch “Connect Device”.
4. Touch “Add New (X/ 5
Free)”.
5.


When a PIN appears on the screen,
operate the Bluetooth® device to enter/
confirm the PIN.
2,3,4 For disclaimer, refer to page 17 of this guide.For any Bluetooth® connectivity issues, reboot your phone or device.
For more information, refer to your Owner

13
Center Display
Infiniti InTouch controls the audio, RearView/Around View® Monitor (if so
equipped), navigation system (if so equipped), InTouch Apps, Bluetoot\
h®
Hands-free phone, and various settings by using the touch-screen display\
,
Infiniti controller, menu button and steering wheel switches.
INFINITI CONTROLLER AND MENU BUTTONS
4 ENTER – Select the highlighted item.

5 Center dial – Turn or slide to select an item or navigate through options.

6 BACK – Return to the previous screen.
7 CAMERA – Press to view the Around View® Monitor (if so
equipped). Press and hold to control the brightness.
STEERING WHEEL SWITCHES
8 – Return to the previous screen.
9 ENTER – Push to select the highlighted item.
10 – Tilt the ENTER button up or down to
navigate through options.
9
810
TOUCH-SCREEN DISPLAY
1 – Return to the previous screen.
2 < or > – Touch the arrow keys to navigate between screens.
3 Touch any key to select that item.
1 3
2 2
5 4 6 7
For more information, refer to your Owner