Quick Reference Guide I 45
44 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI LANE DEPARTURE WARNING SYSTEM (LDWS)
The Lane Departure Warning System
detects the lane on the road and
warns the driver if the vehicle leaves
the lane. The system operates when
the vehicle speed is over 40 mph.
• To turn on the LDWS, press the
LDWS switch.
• To turn off the LDWS, press the
switch again.
2
The BSD (Blind Spot Detection)
system uses a radar sensor to alert
the driver while driving.
It monitors the rear area of the vehicle
and provides information to the driver.1 Blind Spot Detection2 Lane Change Assist3 Rear Cross Traffic Alert
The system will activate if vehicle speed exceeds 20 mph.• To turn on the BSD, press the BSD
button (indicator illuminated).
• To turn off the BSD, press the BSD
button again.
When the vehicle is in R (Reverse), the system provides an alert if a
vehicle is approaching from the sides.Rear Cross Traffic AlertBLIND SPOT DETECTION SYSTEM (BSD)
3
1
DRIVING
DRIVE MODE INTEGRATED CONTROL SYSTEM
You can select the drive mode
according to your preference or the
road condition.
The system initializes to the NORMAL
mode (except ECO mode)
after the vehicle is restarted.
Each time you press the button, the
drive mode is changed as follows :
Eco mode system helps to improve fuel efficiency. When the ECO
mode system is activated, the vehicle acceleration, gear shift points
and air conditioning perfomance will be reduced to conserve the fuel
consumption.
ECO modeNormal mode provides regular daily driving performance with some
fuel efficiency.NORMAL modeSport mode provides a sporty feel and may have heavier steering
effort. In Sport mode, the fuel efficiency may decrease. SPORT mode
NORMAL
ECO
SPORT
Normal mode is not displayed on
the instrument cluster.
Quick Reference Guide I 47
46 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
DRIVING
AUTONOMOUS EMERGENCY BRAKING (AEB)
The Autonomous Emergency Braking (AEB)
system is designed to detect and monitor the
vehicle ahead or detect a pedestrian in the
roadway through radar signals and camera
recognition to warn the driver that a collision is
imminent, and if necessary, apply emergency
braking.
To activate the system,
Select “User Settings
Driving Assist
Autonomous Emergency Braking”
The system deactivates, when the system
setting is cancelled.
1 To turn on/off the cruise control.2 To resume or increase the cruise
control speed.3 To set or decrease the cruise
control speed.4 To cancel the cruise control. The Cruise Control system allows you to
program the vehicle to maintain a
constant speed without depressing the
accelerator pedal.
If your vehicle is equipped with Advanced Smart Cruise Control and you
wish to eliminate the vehicle distance function, you can change cruise control
setting to a standard setting. Press the Cruise Control button on the steering
wheel to turn on the Cruise Control. Then press and hold the vehicle distance
button for more than 2 seconds to toggle between the Smart Cruise Control
(SCC) and Cruise Control (CC) mode. Please refer to your Owner’s Manual for
more information.
CRUISE CONTROL / SMART CRUISE CONTROL
Setting Vehicle Distance (Smart
Cruise Control only)This system allows you to program
the vehicle to maintain constant
speed and distance without
depressing the accelerator or brake
pedal.
The vehicle to vehicle distance
1 will
automatically activate when you set
the cruise speed
2.
Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as
following:
2
1
Distance 2 Distance 3 Distance 4
(Longest)
Distance 1(Shortest)
2341
