Quick Reference Guide I 19
18 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
1 ECO guide2 Speedometer3 Warning and indicator lights4 LCD display (including Trip computer)5 Battery SOC (State of Charge) gauge
3
4
1
2
5
FEATURES AND CONTROLS
WARNINGS AND INDICATORSReady indicator
Service warning
light
Power down warning
lightAir bag warning lightElectric Power Steering
(EPS) warning light
Electronic Brake force
Distribution (EBD)
System warning light
Charging indicator
TPMS Malfunction /
Low tire pressure
warning light
AUTO HOLD indicator
Autonomous
Emergency Braking
(AEB) warning lightLane Departure
Warning System
(LDWS) Indicator
LED headlamp
warning light
Charging system
warning light
(for 12-volt battery)Anti-lock Brake
System (ABS)
warning light
Electic Parking Brake
(EPB) warning light
Parking brake &
brake fluid warning
light
Seat belt
warning light
Turn signal indicator
light
Immobilizer indicator
Master warning light
Electronic Stability
Control (ESC) OFF
indicator light
Electronic Stability
Control (ESC)
Indicator LightLight ON indicator
light
ECO mode indicatorCruise indicator
Adaptive Front Lighting
System (AFLS) warning
lightHigh beam indicator
lightCruise SET indicator
SPORT mode
indicator
INSTRUMENT CLUSTER
High voltage battery
low level warning
light
Quick Reference Guide I 23
22 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
FEATURES AND CONTROLSModes Symbol ExplanationTrip ComputerThis mode displays driving information such
as the tripmeter, fuel economy, etc.
Turn By Turn (TBT)
(if equipped)This mode displays the state of the
navigation.
Assist• This mode displays the state of the Advanced
Smart Cruise Control (ASCC) and
Lane Departure Warning System (LDWS).
•
This mode displays information related to
Tire Pressure.
User SettingsIn this mode, you can change settings of
the doors, lamps, etc.
WarningThis mode displays warning messages related
to the Blind Spot Detection system, etc.
LCD DISPLAY MODES
Type B Type A
1 : MODE button for changing
modes2 : MOVE switch for changing
items3 : SELECT / RESET button for
setting or resetting the
selected item
LCD DISPLAY CONTROL
3
2
2
1
1
Press the illumination control button
to adjust the instrument cluster
illumination brightness.
INSTRUMENT PANEL ILLUMINATION
The Aux. Battery Saver+ function monitors the
charging status of the 12 V auxiliary battery. If the
auxiliary battery level is low, the main high voltage
battery charges the auxiliary battery.
The default setting for Aux. Battery Saver+ is ON.
The driver may cancel the function. Go to ‘User
Settings
Other Features
Aux. Battery Saver+‘.
AUX. BATTERY SAVER+
When the function is activating the third Charging
Indicator Lamp will blink. The message is
displayed if the
Aux. Battery
Saver+ function
was activated.NOTE:Do not touch the high voltage electric wire
(orange), connector, and all electric components
and devices when the function is activating.
1
32
