
|    85
       NAVIGATION
INDEX
VOICE COMMAND 
INDEX
CUSTOMER 
INFORMATION
SPECIFICATIONS
MAINTENANCE
HANDLING THE  UNEXPECTED
DRIVING
NAVIGATION
84    |
TABLE OF CONTENTS
VISUAL INDEX
SAFETY 
INFORMATION
INSTRUMENT PANEL
VEHICLE 
CONTROLS 
AUDIO AND 
CONNECTIVITY
BLUETOOTH® 
HANDSFREELINK®
HONDALINK®
SMS Text Messaging and E-Mail
Certain phones can receive and send messages from your paired and connec\
ted 
phone. visit handsfreelink.honda.com (U.S.) or www.handsfreelink.ca (Canada) to 
check phone compatibility. Standard message rates apply. This feature is limited 
while the vehicle is moving.
Models with two displays
 Receiving and Responding to Messages
When you receive a new message, a pop-up appears on the display. Use the 
selector knob or interface dial to view the message when the vehicle is \
stopped. 
You can also reply to it using fixed phrases or call the sender.
1.  When the prompt appears, select Read.
2.  The message is displayed, and the system reads 
it aloud.
  On models with one display, press the selector 
knob to display the options.
  To reply: Select Reply, and choose one of the six available responses. Select 
Send to send the message. You cannot create a new text message.
To call the sender: Select Call.
 Selecting an Account
If your phone has both text message and e-mail accounts, you can select \
only one 
of them at a time to be active and receive notifications. Use the inte\
rface dial to 
make and enter selections.
1.  Press SeTTINGS.
2.  Select Phone Settings.
3.  Select Select Account.
4.  Select Text Messages or an e-mail account.
*if equipped
Learn how to enter a destination and operate the navigation system.
Basic Navigation Operation
A real-time navigation system uses GPS and a map database to show your current 
location and help guide you to a desired destination. You can operate the system 
using voice commands or the system controls.
To reduce the potential for driver distraction, certain manual functions \
may be 
inoperable or grayed out while the vehicle is moving. Voice commands are always 
available.
 Steering Wheel Controls
Use the steering wheel controls to give voice commands.
 Talk Button Tips•  When using the Talk button, wait for the beep before saying a command.
•  To bypass the system prompts, simply press the Talk button again to say your 
command.
•  When the Talk button is pressed, all available voice commands are highlighted 
in yellow.
•  The system recognizes only the commands listed in the v oice Command Index 
(see page 144)
•  Speak in a clear, natural voice.
•  Reduce all background noise.
•  Adjust the dashboard and side vents away from the microphone in the ceil\
ing.
•  Close the windows and moonroof.
Using the navigation system while driving can take your attention away f\
rom 
the road, causing a crash in which you could be seriously injured or kil\
led.
Operate system controls only when the conditions permit you to safely do\
 so.
WARNING
NAVIGATION*
BACK button: Press to cancel 
a command or operation. 
TALK button: Press to give 
navigation commands.
*if equipped 
BLUeTOOTH HANDSFREELINK          

90    ||    91
       DRIVING
NAVIGATION
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Routing
After a destination is set, you can alter or cancel your route.
 Map Legend
 Canceling Your Route
You can cancel your route at any time. Press the Talk button and say “Cancel 
route.” You can also use the interface dial to make and enter selections.
1.  When en route, press DeST/ROUTe.
2.  Select Cancel Route. The route is cleared and the 
map screen returns.
 Taking a Detour
You can calculate a detour route manually if you encounter a road closure\
 or other 
obstacle. Use the interface dial to make and enter selections.
1.  When en route, press DeST/ROUTe.
2.  Select Detour. The system attempts to calculate 
a new route by avoiding the next 5 miles (8 km) 
while on a freeway or 1 mile (1 km) while on a 
surface street.
During route guidance
Next 
guidance 
point
estimated time 
to destination
Distance to 
destination
Calculated 
route
 FM Traffic
view traffic flow, incidents, and construction in major metro areas. You can also 
route around congestion or incidents using voice commands. Press the Talk 
button before saying each command.
1.  When en route, say “Display traffic on my route.” 
A list of incidents on your route appears.
2.  Say the number of the incident you want to avoid.
3.  Say “Avoid” and the incident list returns.
4.  Say “Reroute” to set the new route.
Learn about preparation for driving, as well as other features.
Before Driving
Check the following items before you begin driving.
 Exterior Checks
•  Make sure there are no obstructions on the windows, door mirrors, exterior 
lights, or other parts of the vehicle.
•  Remove any frost, snow, or ice.
•  Make sure the hood is securely closed.
•  Heat from the engine and exhaust can ignite flammable materials left u\
nder 
the hood, causing a fire. If you’ve parked your vehicle for an exte\
nded period, 
inspect and remove any debris that may have collected, such as dried grass 
and leaves that have fallen or have been carried in for use as a nest by\
 a small 
animal. Also check under the hood for leftover flammable materials aft\
er you or 
someone else has performed maintenance on your vehicle. 
•  Make sure the tires are in good condition.
•  Make sure there are no people or objects behind or around the vehicle.
 Interior Checks
•  Store or secure all items on board properly.
•  Do not pile items higher than the seat height.
•  Do not place anything in the front seat footwells. Make sure to secure t\
he floor 
mats.
•  If you have any animals on board, do not let them move freely around in \
the 
vehicle.
•  Securely close and lock all doors and the tailgate.
•  Adjust your seating position, mirrors, and steering wheel properly.
•  Make sure items placed on the floor behind the front seats cannot roll\
 under the 
seats.
•  everyone in the vehicle must fasten their seat belt.
•  Make sure that the indicators in the instrument panel come on when you s\
tart 
the vehicle, and go off soon after.
DRIVING
If the doors are frozen shut, use warm water around the door edges to me\
lt any 
ice. Do not try to force them open, as this can damage the rubber trim a\
round the 
doors. When done, wipe dry to avoid further freezing.
NOTICE                     

98    ||    99
       DRIVING
DRIVING
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
The ABS may not function correctly if you use an incorrect tire type and\
 size. 
NOTICE
 Brake Assist System 
During hard or emergency braking, the system increases braking force. The brake 
pedal may move slightly or make a noise; this is normal. Continue to hol\
d the brake 
pedal firmly down. 
 Anti-Lock Brake System (ABS) During hard or emergency braking, the system rapidly pumps the brakes to 
prevent wheel lockup and help you maintain steering control. Do not pump\
 the 
brake pedal, rather continue to hold it firmly down.
When ABS activates, you may notice vibrations through the brake pedal or\
 the 
vehicle body, the brake pedal depressing further than usual, or hear a noise from 
the motor compartment. These are all normal. 
In normal use, the ABS system will occasionally cause a sound from the motor 
compartment, especially when the power system is first started or afte\
r repeated 
use of the brakes.
Vehicle Stability Assist (VSA®)
Also known as electronic Stability Control (eSC), vSA helps to stabilize the vehicle 
during cornering if the vehicle turns more or less than what was intende\
d. It 
assists in maintaining traction on slippery surfaces by regulating engin\
e output and 
selectively applying the brakes.
 Turning VSA On or OffvSA is turned on every time you start the engine, 
even if you previously turned it off. If you turn 
vSA off, your vehicle has normal braking and 
cornering ability, but not vSA traction and stability 
enhancement.
Press and hold the vSA OFF button until you hear a 
beep to turn vSA on or off. The vSA OFF indicator 
appears when the system is off.
Traction control stops functioning, which may make 
it easier when trying to free your vehicle if it is stuck 
in mud or snow.
vSA OFF
indicator
vSA OFF button
Release the parking brake fully before driving. The rear brakes and axle\
 can be 
damaged if you drive with the parking brake applied. 
NOTICECruise Control
Maintain a constant vehicle speed without having to keep your foot on th\
e 
accelerator pedal. Use cruise control on freeways or open roads where yo\
u can 
travel at a constant speed with little acceleration or deceleration.
Improper use of cruise control can lead to a crash.
Use cruise control only when traveling on open highways in good weather.
WARNING
 Activating and Setting the Vehicle Speed1.  Press the CRUISe button. The CRUISe MAIN indicator 
appears.
2.  Accelerate to the desired speed (above 25 mph/ 
40 km/h). Press the DeCeL/SeT button and take your foot 
off the pedal to set the speed. The CRUISe CONTROL 
indicator appears. 
 Adjusting the Vehicle Speed
Press the ReS/ACCeL button to increase speed or the 
DeCeL/SeT button to decrease speed.
each time you press the button, the vehicle speed is 
increased or decreased by about 1 mph (1.6 km/h). If you 
keep the button pressed, the vehicle speed increases or 
decreases until you release it.
 Canceling Cruise ControlPress the CANCeL button or the brake pedal. The CRUISe 
CONTROL indicator goes off.
After cruise control has been canceled, you can still resume 
the prior set speed by pressing the ReS/ACCeL button while 
driving at a speed of at least 25 mph (40 km/h).
Press the CRUISe button to turn the system off.
CRUISe button
ReS/ACCeL button
DeCeL/SeT button
CANCeL button             

110    ||    111
       HANDLING THE UNEXPECTED
HANDLING THE UNEXPECTED
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Overheating
If the temperature gauge needle is at the H mark, the engine suddenly lo\
ses power, 
or steam or spray comes out from under the hood, your engine is overheat\
ing.
1.  Immediately park the vehicle in a safe place. Turn 
off all accessories and turn on the hazard warning 
lights.
2.  If steam or spray is not present: Keep the engine 
running and open the hood.
If steam or spray is present: Turn off the engine and 
wait until it subsides. Then, open the hood.
3.  Check that the cooling fan is operating and stop the engine once the tem\
perature 
gauge needle comes down. If the cooling fan is not operating, immediatel\
y stop 
the engine.
4.  Once the engine has cooled down, inspect the coolant level and check the\
 
cooling system components for leaks. If the coolant level in the reserve\
 tank 
is low, add coolant until it reaches the MAX mark. If there is no coolant in t\
he 
reserve tank, make sure the radiator is cool, then cover the radiator ca\
p with a 
heavy cloth and open the cap. If necessary, add coolant up to the base of the 
filler neck, and put the cap back on.
5.  Once the engine has cooled sufficiently, restart it and check the temperature 
gauge. If the temperature needle has gone down, resume driving. If it ha\
s not 
gone down, contact a dealer for repairs.
Steam and spray from an overheated engine can seriously scald you.
Do not open the hood if steam is coming out.
WARNING
Removing the radiator cap while the engine is hot can cause the coolant \
to 
spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiato\
r cap.
WARNING
Continuing to drive with the temperature gauge needle at the H mark may \
damage 
the engine.
NOTICE
Reserve
tank
MAXMIN
Emergency Engine Stop*
The eNGINe START/STOP button may be used to stop the engine due to an 
emergency situation even while driving. If you must stop the engine, cho\
ose one of 
the following operations:
•  Press and hold the eNGINe START/STOP button for 
two seconds, or
•  Firmly press the eNGINe START/STOP button two 
times.
Emergency Towing
Call a professional towing service if you need to tow your vehicle.
Flat bed equipment: The operator loads your vehicle on the back of a tru\
ck. This is 
the best way to transport your vehicle.
Wheel lift equipment: The tow truck uses two pivoting arms that go under\
 the front 
tires and lift them off the ground. The rear tires remain on the ground.\
 This is an 
acceptable way to tow your vehicle.
Trying to lift or tow your vehicle by the bumpers will cause serious dama\
ge. The 
bumpers are not designed to support the vehicle’s weight.
Improper towing such as towing behind a motorhome or other motor vehicle\
 can 
damage the transmission.
NOTICE
*if equipped
The steering wheel will not lock. The power mode changes to ACCeSSORY, unless 
the shift lever is in Park (P), in which case the power mode changes t\
o veHICLe OFF.
Because turning off the engine also disables the power assist the engine\
 provides 
to the steering and braking systems, it will require significantly mor\
e physical effort 
and time to steer and slow the vehicle. Downshift gears and use both fee\
t on the 
brake pedal, if necessary, to slow the vehicle and stop immediately in a safe place. Do not press the button while driving unless it is absolutely necessary \
for the 
engine to be switched off.
NOTICE  

112    ||    113
       HANDLING THE UNEXPECTED
HANDLING THE UNEXPECTED
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Driving on an extremely underinflated tire can cause it to overheat. A\
n overheated 
tire can fail. Always inflate your tires to the specified pressure.
NOTICE
Tire Pressure Monitoring System (TPMS)
Monitors the tire pressure while you are driving.
If your vehicle’s tire pressure becomes significantly low, 
the low tire pressure indicator comes on and a message 
appears on the multi-information display.
Stop your vehicle in a safe place. Check the tire 
pressure and adjust the pressure to the specified 
level. The specified tire pressure is on a label on the 
driver’s doorjamb.
Changing a Flat Tire
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually 
to reduce speed. Then, stop in a safe place. Replace the flat tire wit\
h the compact 
spare tire. Go to a dealer as soon as possible to have the full-size tir\
e repaired or 
replaced.
 Getting Ready to Change the Tire
Park the vehicle on a firm, level, non-slippery surface. Apply the par\
king brake, 
shift to Park (P), and turn the vehicle off. Turn on the hazard warning lights.
1.  Open the tailgate. Turn on the cargo lights if 
necessary (see page 39). Remove the floor mat 
under the second-row seat.
2.  Pull up the floor carpet.
3.  Lift up the floor lid using the handle and remove it.
4.  Take the tool case out of the spare tire well. Take 
the jack and wheel nut wrench out of the tool 
case.
Handle
Floor lid
Floor carpet
Tool case
Spare tire
5. Unscrew the wing bolt, then remove the spare 
tire.
6.  Place a wheel block or rock in front and rear of 
the wheel diagonal to the flat tire.
7.  Place the compact spare tire (wheel side up)
under the vehicle body, near the tire that needs 
to be replaced.
8.  Loosen each wheel nut about one turn using the 
wheel nut wrench.
 Setting Up the Jack
1.  Place the jack under the jacking point closest to 
the tire to be changed.
2.  Turn the end bracket (as shown in the image) 
clockwise until the top of the jack contacts the 
jacking point. Make sure that the jacking point 
tab is resting in the jack notch.
3.  Raise the vehicle, using the jack handle bar and 
the jack handle, until the tire is off the ground.
Jack
handle
bar Wheel nut
Wrench as jack handle
The vehicle can easily roll off the jack, seriously injuring anyone unde\
rneath.
Follow the directions for changing a tire exactly, and never get under the 
vehicle when it is supported only by the jack.
WARNING  

114    ||    115
       HANDLING THE UNEXPECTED
HANDLING THE UNEXPECTED
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
 Storing the Flat Tire
The storage bag, bracket, and mounting wing bolts (A and B) are in the\
 tool case.
1.   Put the flat tire in the storage bag provided with 
your vehicle.
2.   Pull down the U-shaped carpet piece, fold it, and 
tuck the end under the carpet.
3.   Remove the plastic screw with a coin.
4.   Install the bracket and the mounting wing bolt (A) 
on the attachment point, and tighten the bolt.
5.   Install the flat tire on the bracket with the inside 
of the wheel facing toward you.
6.   Install the mounting wing bolt (B) to the bracket 
through one of the five wheel nut holes, and 
tighten the bolt. Poke a hole in the storage bag as 
needed.
Storing a flat tire on the folded third–row seat
1.  Turn over the flap on the left side of the cargo 
area floor.
2.  Pull down the U-shaped carpet piece and remove 
the plastic screw with a coin.
3.  Place the flat tire face down on the attachment 
point.
4.  Put the tire mounting wing bolt (B) in the 
attachment point through one of the five wheel 
nut holes, and tighten the bolt. Poke a hole in the 
storage bag as needed.
The following instructions must be followed to use the jack safely:
•  Do not use the jack with people or luggage in the vehicle.
•  Use the jack provided in your vehicle. Other jacks may not support the w\
eight 
(“load”) or fit the jacking point.
•  Do not use while the engine is running.
•  Use only where the ground is firm and level.
•  Use only at the jacking points.
•  Do not get in the vehicle while using the jack.
•  Do not put anything on top of or underneath the jack.
 Replacing the Flat Tire
1.  Remove the wheel nuts, wheel cover (if 
necessary), and flat tire.
2.  Mount the compact spare tire. Replace the 
wheel nuts, and lightly tighten them.
3.  Lower the vehicle and remove the jack. Tighten 
the wheel nuts in the order indicated in the 
image. Go around, tightening the nuts, two to 
three times in this order. Do not overtighten the 
wheel nuts.
If you drive with the spare tire installed, the 
low tire pressure/TPMS indicator appears. The 
indicator stays on until a regular tire is installed.
Loose items can fly around the interior in a crash and can seriously i\
njure the 
occupants.
Store the wheel, jack, and tools securely before driving.
WARNING
Plastic screw
Carpet piece
Mounting wing  bolt (B)
Bracket Storage bag
Mounting wing bolt (B)
Mounting wing bolt (A)
Bracket
Mounting wing  bolt (B)
Mounting wing bolt (A)
Plastic screw  

122    ||    123
       MAINTENANCE
MAINTENANCE
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Learn about basic maintenance that you can perform on the vehicle yourse\
lf, as well 
as information about how to best maintain the vehicle.
Safety Precautions
Some of the most important safety precautions are listed below; however, we cannot 
warn you of every conceivable hazard that can arise in performing mainte\
nance. 
Only you can decide whether or not you should perform a given task.
 Maintenance Safety
•  To reduce the possibility of fire or explosion, keep cigarettes, sparks\
, and flames 
away from the battery and all fuel-related parts.
•  Never leave rags, towels, or other flammable objects under the hood. H\
eat from 
the engine and exhaust can ignite them, causing a fire.
•  To clean parts, use a commercially available degreaser or parts cleaner, not 
gasoline.
•  Wear eye protection and protective clothing when working with the battery\
 or 
compressed air.
•  Do not run the engine in confined spaces where carbon monoxide gas can\
 
accumulate.
 Vehicle Safety
•  The vehicle must be stationary, and parked on level ground with the parking 
brake set and the engine off.
•  Be aware that hot parts can burn you.
•  Be aware that moving parts can injure you.
Improperly maintaining this vehicle or failing to correct a problem befo\
re 
driving can cause a crash in which you can be seriously hurt or killed. \
Always follow the inspection and maintenance recommendations according 
to the schedules in this guide. 
WARNING
Failure to properly follow maintenance instructions and precautions can \
cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this guide. 
WARNING
MAINTENANCEMaintenance Minder™
Reminds you when indicated maintenance service is due.
Models with information display
When maintenance is due, the Maintenance Minder indicator comes on and a\
 
message appears on the display every time you turn the vehicle on. Press\
 the select/
reset knob to change displays (see page 28).
Models with multi-information display
When maintenance is due, the system message indicator comes on and a mes\
sage 
appears on the display every time you turn the vehicle on. Press the Inf\
o button on 
the steering wheel to change displays (see page 29).
Maintenance 
Minder indicator
Main items
Sub itemsMaintenance Minder message
Maintenance 
Minder indicator
Main items Sub items
Maintenance Minder message
• Independent of the Maintenance Minder information, replace the brake fl\
uid 
every 3 years.
•  Inspect idle speed every 160,000 miles (256,000 km).
•  Adjust the valves during services A, B, 1, 2, or 3 if they are noisy.  

132    ||    133
       MAINTENANCE
MAINTENANCE
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Tire Information
To safely operate your vehicle, your tires must be of the proper type and\
 size, in good 
condition with adequate tread, and properly inflated.
 Inflation Guidelines
•  Properly inflated tires provide the best combination of handling, trea\
d life, and 
comfort. Refer to the driver’s doorjamb label or the specifications (see page 
140) for the specified pressure.
•  Underinflated tires wear unevenly, adversely affect handling and fuel economy, 
and are more likely to fail from overheating.
•  Overinflated tires make your vehicle ride harshly, are more prone to road 
hazards, and wear unevenly.
•  every day before you drive, look at each of the tires. If one looks lower\
 than the 
others, check the pressure with a tire gauge.
•  Measure the air pressure when tires are cold. This means the vehicle has been 
parked for at least 3 hours, or driven less than 1 mile (1.6 km). If n\
ecessary, add 
or release air until the specified pressure is reached. If checked whe\
n hot, 
tire pressure can be as much as 4-6 psi (30-40 kPa, 0.3-0.5 kgf/cm
2) higher than 
checked when cold.
•  At least once a month or before long trips, use a gauge to measure the p\
ressure 
in all tires, including the spare. even tires in good condition can lose 1-2 psi  
(10-20 kPa, 0.1-0.2 kgf/cm
2) per month.
 Inspection Guidelines
every time you inflate the tires, check for the following:
•  Any damage to tires, including bumps, bulges, cuts, splits, or cracks in\
 the side 
or tread. Remove any foreign objects and inspect for air leaks. Replace \
tires if 
you see fabric or cord. 
•  Uneven or excessive tread wear. Have a dealer check the wheel alignment.
•  Cracks or other damage around the valve stems. 
 Wear Indicators
The groove where the wear indicator is located is 
1/16 inch (1.6 mm) shallower than elsewhere on the 
tire. If the tread has worn so low that the indicator is 
exposed, replace the tire. Worn out tires have poor 
traction on wet roads.
Example of a wear
indicator mark
 Tire and Loading Information LabelThe label attached to the driver’s doorjamb provides necessary tire and 
loading information. Using tires that are excessively worn or improperly inflated can cause\
 
a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner’s manual regarding tire inflation 
and maintenance
.
WARNING
Original 
tire sizes
Number of 
people your 
vehicle can 
carry Proper cold 
tire pressure
Total weight 
your vehicle 
can carry 
(do not exceed)
 Tire and Wheel Replacement
Replace your tires with radials of the same size, load range, speed rati\
ng, and 
maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires 
of a different size or construction can cause certain vehicle systems to\
 work 
incorrectly. It is best to replace all four tires at the same time. If that isn’\
t possible, 
replace the front or rear tires in pairs.
If you change or replace a wheel, make sure that the wheel’s specifications match 
those of the original wheels. Only use TPMS-specified wheels approved \
for your 
vehicle.
Installing improper tires on your vehicle can affect handling and stabil\
ity.
This can cause a crash in which you can be seriously hurt or killed.
Always use the size and type of tires recommended in the Owner’s Manual.
WARNING