2017 HONDA CR-V bulb

[x] Cancel search: bulb

Page 4 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual Contents
Child Safety P. 63Exhaust Gas Hazard P. 76Safety Labels P. 77
Opening and Closing the Tailgate P. 147 Security System P. 158 Opening and Closing the Windows P. 161
Operating the Switches Arou

Page 91 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 90
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
System Message 
In

Page 538 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 537
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 538
Safety When Performing Maintenance...539Parts and Fluids Used in Main

Page 539 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 538
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of

Page 569 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 568
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to 
remove.
3. Insert a new

Page 570 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 569
uuReplacing Light Bulbs uHeadlight Bulbs
Maintenance
1. Remove the holding clip using a flat-tip 
screwdriver, then remo ve the upper part of 
the window washer reserve tank.
2. Push the tab to re

Page 571 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 570
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
Fog Light Bulbs*
When replacing, use the following bulbs.
1.Remove the screw using a Phillips-head 
screwdriver and remove the holding clips

Page 572 of 657

HONDA CR-V 2017 RM1, RM3, RM4 / 4.G Owners Manual 571
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
3. Push the tab to remove the coupler.
4. Rotate the old bulb counter-clockwise to 
remove.
5. Insert a new bulb into the fog light 
assembly
Page:   1-8 9-16 next >