478
Maintenance
Accessories and Modifications
Accessories
When installing accessories, check the following:
• Do not install accessories on the windshie ld. They can obstruct your view and 
delay your reaction to driving conditions. In addition, they may become projectiles 
in a crash.
• Do not install any accessorie s over areas marked SRS Airbag, on the sides or backs 
of the front seats, on front or side pillars, or near the side windows. Accessories 
installed in these areas may interfere wi th proper operation of the vehicle’s 
airbags or may be propelled into you or another occupant if the airbags deploy.
• Be sure electronic accessories do not over load electrical circuits or interfere with 
proper operation of your vehicle.
2 Fuses  P. 508
•Before installing any electronic accessory,  have the installer contact an authorized 
Honda Clarity Electric dealer for assistance . If possible, have an authorized Honda 
Clarity Electric dealer inspect the final installation.
1 Accessories and Modifications
Honda Genuine accessor ies are recommended to 
ensure proper operati on on your vehicle.
3WARNING
Improper accessories or modifications can 
affect your vehicle’s handling, stability, and 
performance, and cause a crash in which 
you can be seriously hurt or killed.
Follow all instruction s in this owner’s 
manual regarding  accessories and 
modifications.
3WARNING
Use of improperly designed, engineered or 
manufactured high-voltage battery 
assemblies could cause a fire in your 
vehicle.
A vehicle fire could result in a crash or 
injury.
Only use a genuine Honda high-voltage 
battery assembly, or it s equivalent, in your 
vehicle.
17 CLARITY BEV CSS-31TRV6000.book  478 ページ  2017年4月14日 金曜日 午前11 時8分 
499
uuJump Starting u
Continued
Handling the Unexpected
4.Connect the other end of the second 
jumper cable to the motor/gear case as 
shown. Do not connect this jumper cable to 
any other part of the vehicle.
5. If your vehicle is connected to another 
vehicle, start the assisting vehicle’s engine, 
and increase its rpm slightly.
6. Attempt to start your vehicle’s power 
system. If it isn’t turn on, check that the 
jumper cables have good metal-to-metal 
contact.
17 CLARITY BEV CSS-31TRV6000.book  499 ページ  2017年4月14日 金曜日 午前11 時8分