2017 HONDA CIVIC SEDAN bulb

[x] Cancel search: bulb

Page 5 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) Contents
Child Safety P. 60Exhaust Gas Hazard P. 72Safety Labels P. 73
Opening and Closing the Trunk P. 153 Security System P. 156 Opening and Closing the Windows P. 159
Operating the Switches Around

Page 87 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 85
uuIndicators u
Continued
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
System M

Page 509 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 507
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 508
Safety When Performing Maintenance .... 509Parts and Fluids Used in M

Page 510 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 508
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of

Page 538 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 536
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to 
remove.
3. Insert a new

Page 539 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 537
uuReplacing Light Bulbs uHeadlight Bulbs
Maintenance
1. Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to 
remove.
3. Insert a new bulb into the headlight 
assembly a

Page 540 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 538
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
Fog Light Bulbs*
When replacing, use the following bulbs.
1.Remove the clips using a flat-tip 
screwdriver, remove  the bolt, and push up 
the

Page 541 of 643

HONDA CIVIC SEDAN 2017  Owners Manual (in English) 539
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to 
remove.
4. Insert a new bulb into the fog light 
assembly
Page:   1-8 9-16 17-24 next >