Page 81 of 609

80
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Fog Light 
Indicator*
●Comes on when the fog lights are 
on.——
Immobilizer 
System Indicator
●Comes on briefly when you turn the 
ignition switch to ON 
(w*1, then 
goes off.
●Comes on if the immobilizer system 
cannot recognize the key 
information.
●Blinks  - You cannot start the engine. 
Turn the ignition switch to LOCK 
(0*1, 
pull the key out, and then insert the key 
and turn it to ON 
(w*1 again.●Repeatedly blinks  - The system may 
be malfunctioning. Have your vehicle 
checked by a dealer.
●Do not attempt to alter this system or 
add other devices to it. Electrical 
problems can occur.
—
Security System 
Alarm Indicator
●Blinks when the security system 
alarm has been set.
2 Security System Alarm  P. 133—
Indicator
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  80 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 82 of 609
81
uuIndicators u
Continued
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
ECON Mode 
Indicator
●Comes on for a few seconds when 
you turn the ignition switch to ON 
(w*1, then goes off.●Comes on when you press the 
ECON button.
2ECON Button P. 441
CRUISE MAIN  
Indicator*●Comes on when you press the 
CRUISE  button.2Cruise Control  P. 442—
CRUISE 
CONTROL 
Indicator
*
●Comes on if you ha ve set a speed for 
cruise control.
2 Cruise Control  P. 442—
Washer Level 
Indicator*
●Comes on when the washer fluid 
gets low.●Refill the washer fluid.
2Refilling Window Washer Fluid 
P. 528—
Maintenance 
Minder Indicator*
●Comes on when the scheduled 
maintenance is due soon.2Maintenance MinderTM P. 505—
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  81 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 83 of 609

82
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Smart Entry 
System 
Indicator
*
●Comes on for a few seconds when 
you change the power mode to ON.
●Comes on as soon as a problem is 
detected in the smart entry system 
or push button starting system.
●Stays on constantly or does not come 
on at all - Have your vehicle checked by a 
dealer.
Starter System 
Indicator*
●Comes on for a few seconds when 
you turn the igniti on switch to ON 
(w*1, then goes off.●Comes on if the starter system has a 
problem.
●As a temporary measure, press and hold 
the ENGINE START/STOP button for up to 
15 seconds while pressing the brake pedal 
and manually start the engine. Have your 
vehicle checked by a dealer.
—
Light Control 
Indicator*
●Comes on if there is a problem with 
the automatic lighting control 
system or low beam headlights
*.
●Comes on while driving  - Turn the lights 
on manually and have your vehicle checked 
by a dealer.
—
U.S.
Canada
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  82 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 84 of 609
83
uuIndicators u
Continued
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Auto High-Beam 
Indicator 
(Green)
*
●Comes on when all the operating 
conditions of the auto high-beam 
are met.2Auto High-Beam (High Beam Support 
System)* P. 148—
Auto High-Beam 
Indicator 
(Amber)
*
●Comes on if there is a problem with 
the auto high-beam.●Manually operate the headlight switch.●If you are driving with the high-beam 
headlights when this happens, the 
headlights are changed to low beams.
—●Comes on when the area around 
the camera on the windshield is 
blocked by dirt, mud, etc.●Stop your vehicle in a safe place, and wipe 
it off with a soft cloth.
●If the indicator does not go off after 
cleaning the lens, have your vehicle 
checked by a dealer.
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  83 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 85 of 609

84
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Road Departure 
Mitigation (RDM) 
Indicator
*
●Comes on for a few seconds when 
you turn the ignition switch to ON 
(w*1, then goes off.●Comes on if there is a problem with 
the RDM system.
●Stays on constantly - Have your vehicle 
checked by a dealer.
●Comes on when the RDM system 
shuts itself off.●Stays on  - The temperature inside the 
camera is too high.
Use the climate contro l system to cool 
down the camera.
The system activates when the temperature 
inside the camera cools down.
2 Front Sensor Camera* P. 445
●Stays on  - The area around the camera is 
blocked by dirt, mud, etc. Stop your vehicle 
in a safe place, and wipe it off with a soft 
cloth.
●Have your vehicle checked by a dealer if the 
indicator and message come back on after 
you cleaned the area around the camera.
2 Front Sensor Camera* P. 445
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  84 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 86 of 609

85
uuIndicators u
Continued
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Adaptive Cruise 
Control (ACC) 
Indicator 
(Amber)
*
●Comes on for a few seconds when 
you turn the ignition switch to ON 
(w*1, then goes off.●Comes on if there  is a problem with 
ACC.
●Comes on while driving  - Have your 
vehicle checked by a dealer.
●Comes on if anything covers the 
radar sensor cover and prevents the 
sensor from detecting a vehicle in 
front.
●May come on when driving in bad 
weather (rain, snow, fog, etc.)
●ACC has been automatically 
canceled.
●When the radar sensor gets dirty, stop your 
vehicle in a safe place, and wipe off dirt 
using a soft cloth.
●Have your vehicle checked by a dear if the 
indicator does not go off even after you 
clean the sensor cover.
Adaptive Cruise 
Control ( ACC) 
Indicator 
(White)
*
●Comes on when you press the 
MAIN  button.2Adaptive Cruise Control (ACC)* P. 447—
●Comes on if the temperature inside 
the camera is too high.
●ACC has been automatically 
canceled.
●Use the climate control system to cool 
down the camera.
●Goes off  - The camera has been cooled 
down. Pressing the  MAIN button can 
resume the system.
2 Front Sensor Camera* P. 445
2 Adaptive Cruise Control (ACC)* P. 447
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  85 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 87 of 609
86
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Lane Keeping 
Assist System 
(LKAS ) Indicator 
(Amber)
*
●Comes on for a few seconds when 
you turn the ignition switch to ON 
(w*1, then goes off.●Comes on if there is a problem 
with the LKAS.
●Stays on constantly  - Have your vehicle 
checked by a dealer.
Lane Keeping 
Assist System 
( LKAS ) Indicator 
(White)
*
●Comes on when you press the 
MAIN  button.
2Lane Keeping Assist System (LKAS)* 
P. 464—
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  86 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 88 of 609

87
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
Collision 
Mitigation 
Braking System
TM 
(CMBSTM) 
Indicator*
●Comes on for a few seconds when 
you turn the ignition switch to ON 
(w*1, then goes off.●Comes on when you deactivate 
the CMBSTM. A multi-information 
display message appears for five 
seconds.
●Comes on if there is a problem 
with the CMBSTM.
●Stays on constantly without the 
CMBSTM off  - Have your vehicle checked by 
a dealer.
2 Collision Mitigation Braking SystemTM 
(CMBSTM)* P. 483
●Comes on when the CMBSTM 
system shuts itself off.●Stays on  - The area around the camera is 
blocked by dirt, mud, etc. Stop your vehicle 
in a safe place, and wipe it off with a soft 
cloth.
2 Front Sensor Camera* P. 445
●When the radar sensor  gets dirty, stop your 
vehicle in a safe place, and wipe off dirt 
using a soft cloth.
●Have your vehicle checked by a dealer if the 
message does not disappear even after you 
clean the sensor cover.
2 Collision Mitigation Braking SystemTM 
(CMBSTM)* P. 483
●Stays on  - The temperature inside the 
camera is too high. Use the climate control 
system to cool do wn the camera. The 
system activates when the temperature 
inside the camera cools down.
2 Front Sensor Camera* P. 445
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  87 ページ  2015年9月25日 金曜日 午前11時39分