2017 FORD EXPEDITION air filter

[x] Cancel search: air filter

Page 274 of 500

FORD EXPEDITION 2017 3.G Owners Manual •
Touch-up exposed or primed metal to
prevent rust.
• Cover chrome and stainless steel parts
with a thick coat of auto wax to prevent
discoloration. Re-wax as necessary
when you wash your vehicle.

Page 307 of 500

FORD EXPEDITION 2017 3.G Owners Manual ENGINE SPECIFICATIONS
3.5L Ecoboost
Engine
214
Cubic inches
1-4-2-5-3-6
Firing order
Coil on plug
Ignition system
10.0:1
Compression ratio
0.030 in (0.75 mm) - 0.033 in (0.85 mm)
Spark plug gap
Driveb

Page 311 of 500

FORD EXPEDITION 2017 3.G Owners Manual CAPACITIES AND SPECIFICATIONS
Capacities
WARNING
The air conditioning refrigerant system contains refrigerant under high pressure.
Only qualified personnel should service the air conditioning refriger

Page 449 of 500

FORD EXPEDITION 2017 3.G Owners Manual Multi-Point inspection
Hazard warning system operation
Accessory drive belt(s)
Horn operation
Battery performance
Radiator, cooler, heater and air conditioninghoses
Engine air filter
Suspension compon

Page 451 of 500

FORD EXPEDITION 2017 3.G Owners Manual At every oil change interval as indicated by the information display
*
Inspect the steering linkage, ball joints, suspension, tire-rod ends, driveshaft and U-
joints.
Inspect the wheels and related co

Page 452 of 500

FORD EXPEDITION 2017 3.G Owners Manual SPECIAL OPERATING
CONDITIONS SCHEDULED
MAINTENANCE
If you operate your vehicle primarily in any
of the following conditions, you need to
perform extra maintenance, as indicated.
If you operate your ve

Page 453 of 500

FORD EXPEDITION 2017 3.G Owners Manual Operating in dusty or sandy conditions (such as unpaved or dusty roads)
Replace engine air filter.
Inspect frequently, service
as required
Inspect the wheels and related components for abnormal
noise,

Page 454 of 500

FORD EXPEDITION 2017 3.G Owners Manual Axle and Transfer Case Maintenance
Axle(s) and transfer case (four-wheel drive
vehicles) fluid changes or level checks are
not required unless a leak is suspected or
the assembly has been submerged in
Page:   < prev 1-8 9-16 17-24 next >