2017 FIAT 124 SPIDER door lock

[x] Cancel search: door lock

Page 29 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Note:The red indication can be seen
when the door-lock knob is unlocked.
Operation From Outside
To lock the passenger door with the
door-lock knob from the outside, push
the door-lock knob to the lock

Page 30 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Double Locking System
— If Equipped
The double locking system is designed
to prevent someone who has broken
into your vehicle from opening the door
from the inside. If you have any
problems with the

Page 31 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual To Unlock
Drivers door request switch located on
the exterior door handle.
To unlock the doors, trunk lid, and the
fuel filler door, push the request switch
on the exterior door handle and the
hazard

Page 32 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Auto-Lock Function
A beep sound is heard when both
doors are closed while the key is being
carried. Both doors, the trunk lid, and
fuel door are locked automatically after
about three seconds when the

Page 33 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Auto Lock / Unlock Function — If Equipped
When the vehicle speed exceeds 12 MPH (20 km/h), both doors, and fuel filler door lock automatically.
When the ignition is placed in the OFF position, both

Page 34 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Settings Changing
Settings can be changed using the
following procedure:
1. Safely park the vehicle. Both doors
must remain closed.
2. Place the ignition in the ON position.
3. Push and hold the lock

Page 40 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Power Mirrors
The ignition must be switched to ACC
or ON position.
To adjust, rotate the mirror switch to the
left(L)orright(R).
After adjusting the mirror, lock the
control by rotating the switch to

Page 58 of 300

FIAT 124 SPIDER 2017 2.G Owners Manual Note:Do not obstruct either sensor,
otherwise the air-conditioning system
will not operate properly.
POWER WINDOWS
Power Window Controls
The ignition must be placed in the ON
position for the power wi
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 48 next >