2017 CITROEN RELAY wheel

[x] Cancel search: wheel

Page 111 of 292

CITROEN RELAY 2017  Handbook (in English)  109
Intelligent traction c ontrol
System to improve traction on slippery 
surfaces (snow, black ice, mud...)
This system checks for situations of difficult 
surface adhesion that could make it diffic

Page 124 of 292

CITROEN RELAY 2017  Handbook (in English)  122
GEnErAL POI nt S   O n AI r BAGS
The airbags have been designed to optimise 
the safety of the occupants in the event of 
a serious collision; they work in conjunction 
with the force limiting se

Page 126 of 292

CITROEN RELAY 2017  Handbook (in English)  124
Good practice
If your vehicle is fitted with airbags, observe the safety  guidelines below for these to be fully effective.
Wear a correctly adjusted seat belt.
Sit in a normal upright position.

Page 137 of 292

CITROEN RELAY 2017  Handbook (in English)  135
rOOF cArrYIn G   SYS t EMS
Refer to the "Technical data - 
Dimensions" section for more 
information on the length (L1 to L4) and the 
height (H1 to H3) of the vehicle. Maximum load on th

Page 138 of 292

CITROEN RELAY 2017  Handbook (in English)  136
OtHEr AccESSOrIES
These accessories and parts, having been 
tested and approved for reliability and 
safety, are all adapted to your vehicle. A 
wide range of recommended and genuine 
parts is av

Page 139 of 292

CITROEN RELAY 2017  Handbook (in English)  137
SnOW cHAInS
In wintry conditions, snow chains improve 
traction as well as the behaviour of the 
vehicle when braking.The snow chains must be fitted only to 
the driving wheels. They must never b

Page 151 of 292

CITROEN RELAY 2017  Handbook (in English)  149
FuEL SYS t EM  cut- OFF
After the collision and before restore 
these supplies, check that there is no 
fuel leak or sparks, to avoid the risk of fire. In the event of a collision, a device 
auto

Page 167 of 292

CITROEN RELAY 2017  Handbook (in English)  165
Halogen bulbs must be changed after 
the headlamp has been off for several 
minutes (risk of serious burns). Do not touch 
the bulb directly with your fingers, use a 
lint-free cloth.
When each o