22
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Adjusting the headlamps
The headlamp beam height on your E-MEHARI
should be adjusted according to the load and
number of passengers in your vehicle, so as to
avoid causing a nuisance to other drivers.
Your E-MEHARI has a thumbwheel for
adjusting the height of the beams.
Visual indicators
Direction indicators
Before changing direction, always
signal your intention well in advance,
using the direction indicators.
Before changing direction, check the
vehicle's immediate surroundings using
the mirrors, taking account also of the
blind spots.
Poorly prepared changes of direction
can lead to collisions and accidents.
To operate the right-hand direction indicators:
push the left-hand control stalk behind the
wheel upward.
To operate the left-hand direction indicators:
pull the left-hand control stalk behind the wheel
downward.
The control stalk automatically returns to its
middle position once the change of direction
has been completed.
Select the desired position using headlamp
beam height adjustment control.
Use the "0" position when driving without heavy
loads.
Get to know your E-MEHARI
34
e-mehari_en_Chap02_conduite_ed02-2016
Your E-MEHARI is a silent electric
vehicle.
Your E-MEHARI produces no noise
from its electric motor.
For any manoeuvre: take particular
care in checking your surroundings,
particularly for pedestrians, cyclists and
other road users.
Moving off
To move off in your E-MEHARI, you should:
1. Unlock your E-MEHARI using your personal
RFID key ring.
2.
In
sert the key in the starting switch then turn
it to the MAR position. The welcome screen
appears.
3.
Wh
en you are invited to do it, turn the key to
the AV V position, holding it until your hear
an audible signal (beep). Release the key,
the switch automatically returns to the MAR
position. The following image appears in the
instrument panel screen: 4. Pr
ess the brake pedal.
5. Pl ace the drive selector at position "D"
(for ward drive) or "R" (reverse).
6.
Re
lease the manual parking brake.Switching off the vehicle
To park your E-MEHARI, you should:
1. Place the vehicle in a secure area suitable
for parking.
2.
Immo
bilise the vehicle.
3.
Pl
ace the drive selector at position
"
N".
4.
Ap
ply the manual parking brake.
5.
Sw
itch off and remove the key from the
starting switch.
Driving
