2017 CITROEN E-MEHARI battery

31
e-mehari_en_Chap01_faite-connaissance_ed02-2016
3. Push the charging nozzle (2) i nto the
charging socket until it clicks in place.
4.
Char

ging starts automatically. The
CHARGING indicator on the control unit
comes on to indicate that charging is in
progress.
Two signals indicate that the vehicle's battery
is charging:
-
Th

e right-hand rear lamp flashes 5
t
imes at
the start of the charge.
-
Th

e connection indicator (green plug) in the
display screen flashes continuously.
Stopping the charge
1. Press the unlocking button on the back of
t he charging nozzle then pull it out. The
charging nozzle disengages only if your
E-MEHARI has been unlocked using your
personal RFID key ring. 2. Re
fit the protective cover on the charging
nozzle.
3.
Di

sconnect the plug from the power point.
1
Get to know your E-MEHARI

32
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Comparison of charging
times
Type of chargeEstimated charging
time (0-100%)
Charging point :
16 A 8
t

o 9
h
ours
220V – 10A power point 13
h

our s
When charging the vehicle, particularly
at the roadside, be especially careful of
children when handling the cable and
the charging point.
The cable reel can operate sharply and
cause injury.
Children could trap their fingers in the
charging point closing mechanism.Indications given by the LEDs on the control panel
Green LED Ye l l o w L E D Red LED Description
On for ½
s
ec. On for ½
s
ec. On for ½
s
ec. All of the LEDs come on for ½ second to verify that they work, when the charging cable is
plugged into the power point.
On Off OffThe charging cable is plugged into the power
point. If the YA Z AKI connector is in the vehicle's
charging socket, the charge has finished.
On OnOffThe vehicle's battery is charging.
On OffOn / flashing Fault with the charging cable. Stop using
the charging cable immediately and contact
CITRÖEN ASSISTANCE.
Off OffOffNo electrical power supply is detected at the
power point by the charging cable. Check the
circuit breaker for the power point. If the electrical
power supply is working correctly and none of
the LEDs come on for ½ second to verify that
they are working, it is possible that the charging
cable is damaged. Stop using it immediately and
contact CITRÖEN ASSISTANCE.
Get to know your E-MEHARI

33
e-mehari_en_Chap02_conduite_ed02-2016
Starting / Switching off the vehicle
Before moving off, check that the
position of the drive selector agrees
with your intention.
The drive direction is indicated on the
drive selector by illumination of the ring
in green.
The starting switch (1) is located to the right of
the steering wheel.Starting switch
(1) STOP position: your E-MEHARI is
stationary.
(2) MAR: the 12V battery is connected and the
accessories can be used.
(3) AV V position: switching on the electric
motor.
2
Driving

35
e-mehari_en_Chap02_conduite_ed02-2016
Instruments and indicators on your E-MEHARI
Instrument panel
(1) The instrument panel.
Warning and indicator
lamps
(1) Battery fault.
(2) Motor fault.
(3) Charge indicator.
If warning lamp (1) or (2)
i

s on, you must
stop your E-MEHARI as soon as it is
safe to do so.
Symbols
Main beam
Sidelamps
Rear foglamp
Left-hand direction indicator
Right-hand direction indicator
Braking fault
Alert message
ESP
Defrosting
Heating
Motor power limited
Battery fault
Battery power limited Door locking
Air
c

onditioning
ABS Power steering problem
Seat belt not fastened
Door open (vehicle stationary)
Door open (vehicle moving)
Boot open (vehicle stationary)
Boot open (vehicle moving)
Maintenance
2
Driving

36
e-mehari_en_Chap02_conduite_ed02-2016
Distance recorders
(1) Total distance covered (in km).
(2) Di stance covered since the last reset
(in
k

m).
Speedometer, temperature
indicator and clock
(1) Clock.
(2 ) Ri sk of ice indicator.
(3)
Ambi

ent temperature indicator.
(4)
Curr

ent speed.
Consumption, charge,
state of charge indicators
(1) Image of power demand.
(2 ) Im age of energy recovery.
(3) LMP
® battery state of charge indicator.
(4) Pe
rcentage charge remaining.
Driving

41
e-mehari_en_Chap03_confort_ed02-2016
Heating / Ventilation
Air intake
Air entering the heating and ventilation system
follows different paths according to the settings
made by the driver or passengers.
Air circulating in the passenger compartment
is filtered and comes either from outside
the vehicle or is recirculated from inside the
vehicle.
(1)
Wi
ndscreen demisting/defrosting vents.
(2)
Ce

ntral air vents.
(3)
Si

de air vents
(4)
Foo

twell outlets.
(5)
He

ating and ventilation controls.
Recommendations on ventilation and heating
Ventilation
Observe the following recommendations for the
ventilation system to be fully effective:
● For
a u
niform
d
istribution
o
f
a
ir:
t
ake
c
are
no

t to obstruct the air intakes at the bottom
of the windscreen or the nozzles, vents and
air outlets iside the vehicle.
● Give
p

reference
t
o
t
he
i
ntake
o
f
e
xterior
ai

r: prolonged use of air recirculation can
cause misting of the windscreen and side
windows.
Heating
It operates directly on energy from your
E-MEHARI's LMP® battery.
Its use increases the vehicle's consumption of
electrical energy and reduces its range.
Remember to switch off the heating when it is
no longer needed.
The ventilation and heating systems are more
effective when the vehicle is fully fitted with its
roof and sides.
3
Your comfort

46
e-mehari_en_Chap03_confort_ed02-2016
Interior lighting
(1) Assistance calls microphone
(2 ) Co urtesy lamp switch
(3)
Co

urtesy lamp / Mood lighting
(4)
Tem

perature sensor
Your E-MEHARI's courtesy lamp comes on
automatically on opening the doors and goes
off when closing the doors or when you switch
the vehicle on.
Switching on the courtesy lamp
manually (3)
Press the courtesy lamp switch (2) .
Switching off the courtesy lamp
manually (3)
Press the courtesy lamp switch (2).
The mood lighting mode bathes the passenger
compartment in a blue lighting ambience:
● To
s

witch
o
n
t
he
m
ood
l
ighting:
p
ress
i
ts
sw

itch once.
● To
s

witch
o
ff
t
he
m
ood
l
ighting:
p
ress
t
he
sw

itch again.Before leaving the vehicle, check that
the courtesy lamp and mood lighting
are not still on.
Both are powered by the 12V battery,
which could be completely discharged if
they were to remain on.
Your comfort

53
e-mehari_en_Chap04_entretien_ed02-2016
The drive train is powered directly
by the LMP® battery fitted to your
E-MEHARI.
Never try to do anything to the high
voltage components of your vehicle.
A mistake in handling these
components could cause an electric
shock and serious or fatal injuries.
The underbonnet of the vehicle is a
dangerous area that could cause serious
injuries.
Always keep children well away from
the underbonnet and never leave them
unsupervised.
Under the bonnet
Under the bonnet of your E-MEHARI can
be found the vehicle's drive train and the
reservoirs containing the fluid needed for the
correct operation of your E-MEHARI (brake
fluid, coolant and screenwash fluid).
Opening the bonnet
1. Releasing the bonnet: Pull the bonnet
release lever (1) located below and to the
left of the steering wheel, at the vehicles
left-hand front wheel arch.
Your E-MEHARI's bonnet is opened in two
steps:
The bonnet stay locates into the red cutout (3)
provided for this purpose.
When opening the bonnet, ensure that
it is always supported by the stay, so
as to avoid any injury resulting from the
bonnet dropping.
2.
Ti

p the bonnet safety catch (1)
. Raise and
secure the bonnet using the stay (2) .
4
Maintenance