2017 Citroen C5 boot

213
C5_en_Chap08_en-cas-de-panne_ed01-2016
The tyre pressures are indicated on the
label located on the left-hand centre
door pillar.
Tyre pressures are given on this label
for different vehicle loading conditions.Repositioning the "space-saver"
spare wheel
F Return the spare wheel to its housing above the toolbox.
F

U
nscrew the nut on the bolt by a few turns.
F

P
lace the fixing parts (nut and bolt) in the
middle of the wheel.
F

T
ighten the central nut until it clicks to
secure the wheel.
Repositioning the boot floor
F Release the boot floor to return it to its initial position.
8
In the event of a breakdown

222
C5_en_Chap08_en-cas-de-panne_ed01-2016
Rear lamps (Saloon)
Identify the failed bulb.
1. Brake lamps and sidelamps: P21W/5 W
2.
S

idelamps: R5W
3.
R

eversing lamps: H21W
4.
F

oglamps: H21W
5.
D

irection indicators: PY21WBoot lid-mounted lamps
F Refit the bulb holder H .
F C heck that the bulb holder H is secured
correctly by the two clips E .
F

R
efit the connector G .
F

R
eplace and fix the trim F with its 3 clips.
F
O
pen the boot.
F
U
sing a flat screwdriver, remove the 3 clips
which fix the trim in the lamp area.
F

P

artially remove the trim F .
F

D

isconnect the connector G .
F

U

nclip the bulb holder H .
F

R

eplace the failed bulb.
In the event of a breakdown

223
C5_en_Chap08_en-cas-de-panne_ed01-2016
Wing-mounted lamps
F Remove the lateral boot trim flap A. To do
so, pull it towards the inside of the boot,
then pull it upwards.
F

D
isconnect connector B .
F

U
nscrew the 2 fixings C .
F

R
emove the lamp from its housing. F

D
etach the bulb holder D
.
F
R
eplace the failed bulb.
F
R
efit the bulb holder D
.
F
P
lace the lamp in its housing.
F
S
crew in the 2 fixings C
.
F
R
efit connector B
.
F
R
efit the side boot trim A
.
For vehicles fitted with a Hi-Fi amplifier, on the
right-hand side slacken the screw by a quarter
turn, then pull the boot side trim A up. You can use the wheelbrace to screw or
unscrew the fixings C
.
8
In the event of a breakdown

224
C5_en_Chap08_en-cas-de-panne_ed01-2016
Tailgate-mounted lamps
Rear lamps (Tourer)
Identify the failed bulb.
1. Brake lamps and sidelamps: P21W/5 W
2.
S

idelamps: R5W
3.
R

eversing lamps: H21W
4.
F

oglamps: H21W
5.
D

irection indicators: PY21W F

R
efit the bulb holder H ensuring that it is
correctly clipped in place.
F

P
osition the lamp in its housing.
F

T
ighten the fixing nut G.
F

R
efit the connector F.
F

P
osition and clip in place the plastic
cover
E.
F

O
pen the boot.
F

U
sing a flat screwdriver, remove the plastic
cover E .
F

D
isconnect the connector F.
F

U
nscrew the fixing nut G.
F

D
isengage the lamp from its housing.
F

U
nclip the bulb holder H.
F

R
eplace the failed bulb.You can use the wheelbrace to screw or
unscrew the fixing nut G.
In the event of a breakdown

225
C5_en_Chap08_en-cas-de-panne_ed01-2016
Wing-mounted lamps
F Pull away the flap in the boot side trim A.
To do this, pull it towards the middle of the
boot, then pull it up.
F

D
isconnect the connector B .
F

U
nscrew the fixing nut C .
F

R
emove the lamp from its housing. F

D
etach the bulb holder D
.
F
R
eplace the faulty bulb.
F
R
efit the bulb holder D
.
F
P
lace the lamp in its housing.
F
S
crew in the fixing nut C
.
F
R
efit the connector B
.
F
R
efit the side boot trim A
.
For vehicles fitted with a Hi-Fi amplifier, on the
right-hand side slacken the screw by a quarter
turn, then pull the boot side trim A up. You can use the wheelbrace to screw or
unscrew the fixing nut C
.
8
In the event of a breakdown

227
C5_en_Chap08_en-cas-de-panne_ed01-2016
Interior lamps
Courtesy lamps
Bulb: W5W
F U nclip the transparent cover of the roof
lamp to reach the bulb.
Rear reading lamps (Tourer)
Bulb: W5W
F D etach the cover of the reading lamp to
access the bulb.
Map reading lamps
Bulb: W5W
F D etach the cover.
F

I
f necessary, detach the partition of the
affected map reading lamp.
Boot lamp
Bulb: W5W
F D etach the lamp cover for access to the
bulb.
8
In the event of a breakdown

232
C5_en_Chap08_en-cas-de-panne_ed01-2016
Fusebox C
Fuse N°Rating Function
F1 15 ARear screen wipe (Tourer)
F2 30 ALocking and deadlocking relay
F3 5 AAirbags
F4 10 AAutomatic gearbox - Additional heater unit (Diesel) - Electrochrome rear view mirrors
F5 30 AFront windows - Sun roof - Passenger door lighting - Passenger door mirror adjustment
F6 30 ARear windows
F7 5 AVanity mirror lighting - Glove box lighting - Interior lamps - Torch (Tourer)
F8 20 AAudio system - Steering mounted controls - Screen - Under-inflation detection - Electric boot ECU
F9 30 ACigarette lighter - Front 12 V socket
F10 15 AAlarm - Steering mounted controls, lighting, signalling and wiper stalks
F11 15 ALow current anti-theft switch
F12 15 ADriver’s electric seat - Instrument panel - Seat belt not fastened warning lamps - Air conditioning controls
F13 5 AEngine relay unit - Hydraulic suspension pump cut-off relay - Airbags ECU supply
F14 15 ARain and sunshine sensor - Parking sensors - Passenger’s electric seat - Trailer relay unit - Hi-Fi amplifier ECU -
Hands-free kit - Lane Departure Warning System
F15 30 ALocking and deadlocking relay
F17 40 AHeated rear screen - Heated door mirrors
FSH SHUNTPA R K S H U NT
In the event of a breakdown

238
C5_en_Chap08_en-cas-de-panne_ed01-2016
Disconnecting the (+) terminal
F Ra ise the lever A fully to release the clamp B .
F

R
emove the clamp B by lifting it off.
Quick-release terminal clamp*
Reconnecting the (+) terminal
F Ra ise the lever A fully.
F

R
efit the open clamp B on the (+) terminal.
F

P
ush the clamp B fully down.
F

L
ower the lever A to lock the clamp B .
Do not force the lever as locking will
not be possible if the clamp is not
positioned correctly; start the procedure
again.
Disconnecting the battery
In order to maintain an adequate state
of charge for starting the engine, it is
recommended that the battery be disconnected
if the vehicle is taken out of service for a long
period.
Before disconnecting the battery:
F

c
lose all openings (doors, boot, windows),
F

s
witch off all electrical consumers (audio
system, wipers, lighting, ...),
F

s
witch off the ignition and wait for
four
m

inutes.
Having exposed the battery, it is only
necessary to disconnect the (+) terminal.Following reconnection of the
battery
After reconnecting the battery, switch on the
ignition and wait 1 minute before starting the
engine to allow initialisation of the electronic
systems.
However, if minor problems persist following
this operation, contact a CITROËN dealer or a
qualified workshop.
Referring to the corresponding section, you
must yourself reinitialise or reset certain
systems, such as:
-

t
he remote control,
-

t
he electric windows,
-

t
he panoramic sunroof blind,
-

t
he date and time in the audio system,
-

t
he radio preset stations.The Stop & Start system may not be
operational during the trip following the
first engine start.
In this case, the system will only be
available again after a continuous
period of immobilisation of the vehicle,
a period which depends on the ambient
temperature and the state of charge of
the battery (up to about 8 hours).
* Depending on version.
In the event of a breakdown