2017 CITROEN C-ELYSÉE reset

23
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Service indicator
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
System
 
which
 
informs
 
the
 
driver
 
when
 
the
 
n

ext
 
service
 
is
 
due,
 
in
 
accordance
 
with
 
the
 
ma

nufacturer's
 ser

vicing
 s

chedule.
Between 600 miles (1 000 km) and 1 800 miles
(3 000 km) remain before the next service is due
For 5 seconds after the ignition is switched on, t
he   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   739   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 400   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
1
Monitoring

24
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes   to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
For
  BlueHDi   Diesel   versions,   this   alert  
m

ay   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Service indicator
zero reset
After each service, the service indicator must b
e   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears.
5
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 t
he
 
distance
 
recorder
 
resumes
 
its
 
normal
 
ope

ration.
 T

he spanner remains on .The
 
distance
 
remaining
 
may
 
be
 
w

eighted
 
by
 
the
 
time
 
factor,
 
depending
 
o

n
 
the
 
driving
 
conditions.
Therefore,
 
the
 
spanner
 
may
 
also
 
come
 
o

n
 
if
 
you
 
have
 
exceeded
 
the
 
period
 
s

ince
 
the
 
last
 
service,
 
indicated
 
in
 
the
 
ma

nufacturer's
 ser

vice
 s

chedule.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
s

panner
 
may
 
also
 
be
 
brought
 
on
 
earlier
 
t

han
 
expected,
 
depending
 
on
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
(

depending
 
on
 
the
 
country
 
of
 
sale).
The
 
rate
 
of
 
deterioration
 
of
 
the
 
engine
 o
il
 
depends
 
on
 
the
 
driving
 
conditions
 
in
 w
hich
 
the
 
vehicle
 
is
 
used.
Monitoring

25
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Retrieving the service
information
You can access the service information at any   time.
F
 
P
ress   the   trip   distance   recorder   zero   reset  
b

utton.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.
System
  which   measures   the   total   distance  
t

ravelled   by   the   vehicle   during   its   life.
The
  total   and   trip   distances   are   displayed   for  
t

hirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Total distance recorder
System which measures a distance travelled during   a   day   or   other   period   since   it   was   reset  
t

o   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Trip distance recorder
Distance recorders
1
M

27
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Zero reset
F Press  the   control   for   more   than  t
wo   seconds   to   reset   to   zero   the   distance  
t

ravelled,   the   average   fuel   consumption  
a

nd   the   average   speed.
System
 
that
 
gives
 
you
 
information
 
on
 
the
 
current
 
journey
 
(range,
 
fuel
 
consumption…).
Trip computer
Screen in instrument panel
Monochrome screen C
Information displays
F Press   the   button,   located   at   the   end   of   the  w
iper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.
 T

he   trip   computer   provides   the   following  
i

nformation:
-
 ra

nge,
-
 
c
urrent   fuel   consumption,
-
 
d
istance   travelled,
-
 
a
verage   fuel   consumption,
-
 a

verage
 s
peed.
F
 
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
1
M

28
If dashes are displayed continuously while   driving   in   place   of   the   digits,  
c

ontact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. This
  function   is   only   displayed   from  
3

0   km/h.
This   value   may   vary   following   a   change  
i

n   the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
Trip computer, a few definitions
Range
(k m)
The
  number   of   kilometres   which  
c

an   be   covered   with   the   fuel  
r

emaining   in   the   tank.   Related  
t

o   the   average   fuel   consumption  
ov

er   the   last   few   kilometres  
t

ravelled.
When
 
the
 
range   falls   below   30   km,   dashes   are  
d

isplayed.
 
After   filling   with   at   least   5   litres   of  
f

uel,
 
the
 
range   is   recalculated   and   is   displayed  
w

hen
 
it
 
exceeds   100   km.
Current fuel consumption
(l/100 km or km/l)
C alculated   during   the   last  
f

ew   seconds.
Average fuel consumption
(l/100 km or km/l)
C alculated   since   the   last   trip   reset.
Average speed
(km/h)
Calculated  since   the   last   trip   reset.
Distance travelled
(k m)
Calculated  since   the   last   trip  
r

eset.
Monitoring

167
C-elysee_en_Chap09_info-pratiques_ed01-2016
Disconnecting the (+) terminal
F Raise the lever A fully to release the clamp  B.
Reconnecting the (+) terminal
F Position   the   open   clamp   B of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   down   on   the   clamp   to   position   it  
c

orrectly   on   the   battery   post.
F
 
L
ock   the   clamp   by   lowering   the   lever   A.
Do
  not   force   the   lever   as   locking   will  
n

ot   be   possible   if   the   clamp   is   not  
p

ositioned   correctly;   start   the   procedure  
ag

ain.
Disconnecting the battery
In order to maintain an adequate state of   charge   for   starting   the   engine,   it   is  
r

ecommended   that   the   battery   be   disconnected  
i

f   the   vehicle   is   taken   out   of   service   for   a   long  
p

eriod.
Wait
  2   minutes   after   switching   off   the   ignition  
b

efore   disconnecting   the   battery:
F
 
c
lose   all   openings   (doors,   boot,   windows,  
r

oof),
F
 
s
witch   off   all   electrical   consumers   (audio  
s

ystem,   wipers,   lighting,   ...),
F
 
s
witch   off   the   ignition   and   wait   for  
f

our minutes.
Having
  exposed   the   battery,   it   is   only  
n

ecessary   to   disconnect   the   (+)   terminal.
Following reconnection of the
battery
After reconnecting the battery, switch on the ignition   and   wait   1   minute   before   starting   to  
a

llow   initialisation   of   the   electronic   systems.
However,
  if   minor   problems   persist   following  
t

his   operation,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Referring
  to   the   corresponding   section,   you  
m

ust   yourself   reinitialise   or   reset   certain  
s

ystems,   such   as:
-
 
t
he   remote   control,
-
 
t
he   date   and   time,
-
 
t
he   radio   preset   stations.
Quick release terminal
The Stop & Start system may not be operational   during   the   trip   following   the  
f

irst   engine   start.
In
  this   case,   the   system   will   only   be  
a

vailable   again   after   a   continuous  
p

eriod   of   immobilisation   of   the   vehicle,  
a

  period   which   depends   on   the   ambient  
t

emperature   and   the   state   of   charge   of  
t

he   battery   (up   to   about   8   hours).
9
Practical information

01
196
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
On / Off.
FIRST STEPS
Volume adjustment.
Select
 
screen   display  
between

  modes:
Full
 
screen:  
Audio
  (or  
telephone

  if   call   in   progress)   /
In
 
a
 
window:  
Audio
  (or  
telephone

  if   call   in   progress)   -
Time
 
or
 
T
rip   computer.
Long
 
press:   black   screen  
(DARK).
Select

 
AM
  /   FM   wavebands. Select
  preset   radio   station.
Long
  press:   store   a   station.
Display
  the   list   of   stations   received,  
CD/MP3

  tracks   or   folders.
Long
  press:   managing   the  
classification

  of   MP3/WMA
 
files   /  
update

  the   list   of   stations   received.
TA
 

(Traffic  
Announcement)
 
function

  On   /   Off.
Long   press:   access   to   type  of
  information.
Confirmation  
or

  display   of  
contextual

  menu.Automatic
  search   up   /   down  
for

  radio   frequencies.
Select
  previous   /   next   CD,  
USB,

  streaming   track.
Navigation
  in   a   list.
Abandon
  the   current   operation.
Up
  one   level   (menu   or   folder).
Manual
  step   by   step   search   up   /   down   for  
radio

  frequencies.
Select   previous   /   next   MP3   folder.
Select   previous   /   next   folder   /   genre   /   artist   /  
playlist

  in   the   USB   device.
Navigation   in   a   list.
Select   source:
Radio,   CD,  
AUX,
  USB,  
Streaming.
Accept

  an   incoming   call.
Access   to   main   menu.
Audio
  settings:
audio
  ambiences,   treble,   bass,  
loudness,

  distribution,   left/
right
  balance,   front/rear   fader,  
automatic

  volume.

221
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
FREqUENTLY ASKED q UESTIONS
The following tables contain answers to the most frequently asked questions.
q

UESTION ANSWER SOLUTION
There
  is   a   difference   in  
sound

  quality   between  
the

  different   audio  
sources

  (radio,   CD...).For
  optimum   sound   quality,   the   audio   settings   (Volume,   Bass,  
T
reble,  
Ambience,

  Loudness)   can   be   adapted   to   the   different   sound   sources,  
which

  may   result   in   audible   differences   when   changing   source   (radio,  
CD...).Check

  that   the   audio   settings   (Volume,   Bass,  
T

reble,  
Ambience,
  Loudness)   are   adapted   to  
the

  sources   listened   to.   It   is   advisable   to   set  
the

 
AUDIO
  functions   (Bass,  
T
reble,   Front-Rear  
Fader

,   Left-Right   Balance)   to   the   middle   position,  
select

  the   musical   ambience   "None"   and   set   the  
loudness

  correction   to   the   "Active"   position   in   CD  
mode

  or   to   the   "Inactive"   position   in   radio   mode.
When
  changing   the  
settings

  for   treble   and  
bass,

  the   ambience  
setting

  is   deselected.
When
  changing   the  
ambience

  setting,   treble  
and

  bass   are   reset  
to zero. Choosing

  an   ambience   imposes   settings   for   treble   and   bass.   Modifying  
one

  without   the   other   is   not   possible.Modify
  the   treble   and   bass   settings   or   the  
ambience

  setting   to   obtain   the   desired   sound  
quality

.
When
  changing   the  
balance

  setting,  
distribution

  is   deselected.Choosing
  a   distribution   setting   imposes   a   balance   setting.   Modifying   one  
without

  the   other   is   not   possible. Modify
  the   balance   setting   or   the   distribution  
setting

  to   obtain   the   desired   sound   quality.