157
Berlingo2VP_en_Chap07_Verification_ed02-2016Berlingo2VP_en_Chap07_Verification_ed02-2016
LEVELS
Oil change
This must be carried out at
the intervals specified in the
manufacturer's
servicing schedule.
Ask
for
advice from a CITROËN dealer.
Remove
the dipstick before filling.
Check
the level after filling (never
exceed
the max mark).
Refit
the oil filler cap before closing the
bonnet.
Changing the brake fluid
The brake fluid must be changed at the intervals stated, according to the
manufacturer's servicing schedule.
Use
fluids recommended by the
manufacturer
, which meet the DOT4
standard.
The level must be between the MIN
and
MAX marks on the reservoir.
If
fluid has to be added frequently,
this indicates a fault which must be
checked
by a CITROËN dealer or
a
qualified workshop as soon as
possible.
Warning lamps
If you have to remove / refit the engine style cover, handle it with
care
to avoid damaging the fixing
clips.
Oil level
It is recommended that the oil level be
checked every 3 000 miles (5 000 km)
and topped up if necessary between oil
changes.
Check
the level with the vehicle level,
engine
cold, using the dipstick.
Dipstick
Viscosity selection
In all cases, the oil selected must
meet
the requirements specified in the
manufacturer's
service schedule.
These regular maintenance
operations
will keep your vehicle
in
good working order.
Ask
for
advice from a CITROËN dealer or refer
to the maintenance and warranty guide
in
the handbook pack.
Checks using the warning
lamps in the instrument panel
is described in chapter 3,
"Instruments and controls"
section.
There
are two marks on
the
dipstick:
A = maximum
If
you fill past this mark,
contact a CITROËN
dealer
or a qualified
workshop.
B
= minimum
Never allow the level to
fall
below this mark.
To maintain the reliability
of engines and emission
control systems, the use
of additives in engine oil
is
prohibited.
CHECKS
7
Levels
