2017 Citroen BERLINGO MULTISPACE RHD ABS

185
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Rear lamps
This procedure requires the use of
the spanner supplied with the tools for
changing  a   wheel.
When
  refitting,   take   care   to  
reposition the tabs and the wiring
correctly to avoid trapping the
wiring.
After changing the rear direction
indicator bulb, the reinitialisation time is
above

  2   minutes.
-
Move aside the 4 tabs then extract
the
  bulb   holder.
-

Remove the faulty bulb by
pressing it lightly while turning it
anticlockwise.
-

 
Change
  the   bulb.
When
  removing   the   lamp   unit:
-

with tailgate, pull the lamp unit
towards the centre of the vehicle,
-


with hinged doors, pull the lamp
unit

  towards   you.
For more information on bulbs, refer to
the
 
"Types
 
of
 
bulb".
1.

Brake lamps / sidelamps


T

ype B,
 
P21/5W
 
-
 
21/5W
2.

Direction indicators


T

ype B, PY21W - 21W (amber)
3.

Reversing lamps


T

ype B, P21W - 21W
4.

Foglamps


T

ype B, P21W - 21W
High pressure jet washing When using this type of washing
on stubborn dirt, do not persist on
the headlamps, the other lamps
and their edges to avoid damaging
their
 
coating
 
and
 
seals. Chapter 9, "Changing a wheel"
section.
-

Identify the failed bulb, then open
the

  rear   doors   to   180°.
Chapter
  3,   "Access"   section.
-
 
Remove
  the   two   fixing   bolts   using  
the

  spanner   provided.
-
 
Pull
  the   lamp   unit   from   the   outside.
-

Holding the lamp, disconnect the
electrical

  connector.
QUICK HELP
8
Changing a bulb

192
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Without lifting (4 wheels on the
road)
You should always use a towing arm.
BEING TOWED
This procedure involves the use of
the towing eye supplied with the tools
for
  changing   a   wheel.
From the front
- Unclip the cover by pressing the
bottom  part.
-

Fully screw in the removable
towing eye.
From the rear
- Unclip the cover using a coin or the
flat   part   of   the   towing   eye,
-

Fully screw in the removable
towing eye. When towing with the engine
switched

  off,   there   is   no   braking   or  
steering

  assistance.
Lifting (only 2 wheels on the
road)
It is preferable to raise the vehicle
using
  professional   lifting   equipment.Vehicles fitted with a manual
gearbox (Diesel version)
In
  the   case   of   vehicles   fitted   with  
a manual gearbox, the gear lever
must be in neutral, failure to observe
this special condition may result in
damage

  to   transmission   and   braking  
components and the absence of
braking

  assistance   when   the   engine   is  
started

  again.
Section
 
8,
 
"Changing
 
a
 
wheel".
Having your vehicle towed

258
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Radio
QUESTIONANSWER SOLUTION
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through
  which   the   vehicle   is   travelling.Activate the "RDS" function by means of the
short-cut
  menu   to   enable   the   system   to   check  
w

hether there is a more power ful transmitter in
the
  geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This phenomenon is normal and does not indicate
a
  fault   with   the   audio   system.
The aerial is absent or has been damaged (for example when going
through
  a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I cannot find some radio
stations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list.Press on the "Update list" function in the system
to
  update   the   list   of   stations   received.
Some radio stations send other information in place of their name
(the
  title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The name of the radio
station
 c

hanges.
Audio and Telematics

281
Berlingo2VP_en_Chap10b_RD45_ed02-2016
QUESTIONANSWER SOLUTION
The stored stations do not
function (no sound,
87.5
 
Mhz   is   displayed...). An
  incorrect   waveband   is   selected.Press the BAND AST button to return to the
waveband (AM, FM1, FM2, FMAST) on which the
stations
  are   stored.
The traffic announcement
(TA)
 
is
 
displayed.   I  
d
o  
n

ot receive any traffic
information. The radio station is not part of the regional traffic information
network.
Tune to a radio station which broadcasts traffic
information.
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through
  which   the   vehicle   is   travelling.Activate the RDS function to enable the system
to
  check   whether   there   is   a   more   power ful  
t

ransmitter   in   the   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   underground   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This phenomenon is normal and does not
indicate
  a   failure   of   the   audio   equipment.
The aerial is absent or has been damaged (for example when going
through
  an   automatic   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
Sound cut-outs of 1 to
2 seconds
  in   radio   mode.During this brief sound cut-out, the RDS searches for another
frequency
  giving   better   reception   of   the   station.Deactivate the RDS function if the phenomenon
is
  too   frequent   and   always   on   the   same   route.
Audio and Telematics
TECHNOLOGY on BOARD
10