Page 15 of 488

NOTE:You can insert the double-sided emergency key
into the lock cylinders with either side up.
Ignition Or Accessory On Message
When opening the driver’s door when the ignition is in
ACC or ON (engine not running), a chime will sound to
remind you to cycle the ignition to OFF. In addition to the
chime, the ignition or accessory on message will display in
the cluster. NOTE:
With the Uconnect system, the power window
switches, radio, power sunroof (if equipped), and power
outlets will remain active for up to ten minutes after the
ignition is placed in the OFF position. Opening either front
door will cancel this feature. The time for this feature is
programmable. Refer to “Uconnect Settings” in “Under-
standing Your Instrument Panel” for further information.
WARNING!
• Before exiting a vehicle, always shift the automatic
transmission into PARK or the manual transmission
into FIRST gear or REVERSE, apply the parking
brake, turn the vehicle OFF, remove the key fobs
from vehicle, and lock all doors.
• Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Leaving children in a
vehicle unattended is dangerous for a number of
reasons. A child or others could be seriously or
fatally injured. Children should be warned not to
touch the parking brake, brake pedal or the gear
selector.
• Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or others
(Continued)
Emergency Key Removal
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13
Page 243 of 488
Uconnect Owner ’s Manual Supplement and “Onboard
Diagnostic System (OBD II) Cybersecurity” in “Maintain-
ing Your Vehicle”.
SETTING THE ANALOG CLOCK
To set the analog clock at the top center of the instrument
panel, push and hold the button until the setting is correct.
UCONNECT RADIOS — IF EQUIPPED
For detailed information about your Uconnect 8.4 radio,
refer to the following images for the correct Uconnect
Owner ’s Manual Supplement.
For the below radio configuration, please refer to the
Uconnect 8.4/8.4 NAV Owner ’s Manual Supplement.
Setting The Analog Clock
Refer to the Uconnect 8.4/8.4 NAV Owner ’s ManualSupplement
4
UNDERSTANDING YOUR INSTRUMENT PANEL 241
Page 244 of 488
For Canadian residents with the below radio configuration,
please refer to the Uconnect 8.4 Owner ’s Manual Supple-
ment.
UCONNECT SETTINGS
The Uconnect system uses a combination of buttons on the
touchscreen and buttons on the faceplate located on the
center of the instrument panel that allows you to access
and change the customer programmable features.
CAUTION!
Do NOT attach any object to the touchscreen, doing so
can result in damage to the touchscreen.
Refer to the Uconnect 8.4 Owner ’s Manual SupplementUconnect 8.4/8.4 NAV Buttons On The Touchscreen AndButtons On The Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
242 UNDERSTANDING YOUR INSTRUMENT PANEL
Page 477 of 488

Maintenance Procedures..................... .408
Maintenance Schedule .......................454
Malfunction Indicator Light (Check Engine) . . . .215, 406
Manual Park Release ........................394
Manual, Service ............................464
Master Cylinder (Brakes) .....................423
Memory Feature (Memory Seat) ................112
Memory Seat ..............................112
Memory Seats And Radio .....................112
Methanol ............................... .358
Mirrors ..................................86
Electric Powered ..........................93
Electric Remote ...........................93
Exterior Folding ..........................92
Heated .................................95
Outside ................................91
Rearview ...............................86
Vanity .................................95
Modifications/Alterations, Vehicle ................7
Monitor, Tire Pressure System ..................351
Mopar Parts .......................... .407, 463
MTBE/ETBE ............................. .358
Multi-Function Control Lever ..................121 New Vehicle Break-In Period
...................75
Occupant Restraints .........................36
Octane Rating, Gasoline (Fuel) .......357, 449, 450, 451
Oil Change Indicator, Reset ...................231
Oil, Engine .....................408, 449, 450, 451
Capacity ...............................447
Change Interval ........................ .409
Checking .......................... .408, 409
Dipstick ............................408, 409
Disposal ...............................411
Filter .......................411, 449, 450, 451
Filter Disposal ...........................411
Identification Logo .......................409
Materials Added To .......................411
Pressure Warning Light ....................211
Recommendation .....................409, 447
Synthetic ............................. .410
Viscosity .......................... .410,447
Oil
Filter, Change ..........................411
Oil Filter, Selection ..........................411
Oil Pressure Light ..........................211
Onboard Diagnostic System ...................405
Operating Precautions .......................405
Operator Manual (Owner’s Manual) ...............4
10
INDEX 475