2017 BMW M3 Owners Manual

Driving
tips
This chapter provides you with information useful in dealing with specific driving and operating modes.Online Edition for Part no. 01 40 2 976 002 - X/16

BMW
M3
technologyVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
High-performance
engine
General
information
With a displacement of 3 liters, the high-perj formance engine generates a maximum power
of 425 hp, with Competition Package 444 hp and a maximum torque of 406 lb ft/550 Nm.With its spontaneous response behavior, aspeed range of wide utility results. The maxijmum engine speed is 7,600 rpm and is elecj
tronically controlled. Because of the high enj gine dynamics, the maximum engine speed
with the vehicle stationary is reduced.
Warm-up
During the engine warm-up phase, the high-
performance engine has a somewhat rougher
running behavior because of the emission conj
trols.
When the engine is cold, the exhaust system has a slightly metallic undertone due to the naj
ture of the system.
For more information about the warm-up proj
cedure: Engine speed, refer to page 84, and
engine oil temperature, refer to page 85.Compound
brake
The high-performance braking system has
perforated compound brake discs.
Because of particular structural characteristics,
there may be operation-related noises during
braking. However, this has no effect on perj
formance, operational reliability and reliability
of the brake.
Correct
braking
To keep the brake system in optimum condij tion, it is expedient to apply them at regular injtervals corresponding to the vehicle character.
M
carbon
ceramic
brakeThe high-performance braking system has
perforated carbon ceramic brake discs.
Due to properties of the materials used, brakj ing may be associated with louder function
noises, particularly in wet conditions, just bej
fore the vehicle comes to a stop. However, this
has no effect on the performance, operational
reliability and durability of the brake.
The effects of moisture and road salt from usj ing a vehicle wash, dew formation overnight,
driving in rain, etc., may render the braking efj
fect comparable to that of a conventional brakj
ing system. This may be perceived as reduced
braking effect and can be compensated for, if
needed, by pressing the brake pedal harder.
Before washing the vehicle in an automatic
carwash or wash tunnel, clean the brake discs
and brake calipers with a steam jet or high-
pressure washer as well, to prevent encrustaj
tions and dirt buildups, caused by salt crystals,
for instance if the vehicle is immobile afterj
wards. The cleaning effect of automatic carj
washes or wash tunnels is usually not adej
quate for this in the area around the wheels.Seite 162Driving
tipsBMW
M3
technology162
Online Edition for Part no. 01 40 2 976 002 - X/16

To do this, also follow the instructions inWashing the vehicle, refer to page 216, and
Braking safely, refer to page 165.
Drivetrain
With this vehicle, particular value was placed
on the direct connection from engine to the
drivetrain. Due to the torsionally rigid design of the drivetrain, as is typical in a sports car, the
transmission of the torque also gives acoustic
feedback.
When there are load changes, this may result
in clicking noises. The do not cause any imj
pairment of the operation or the service life of
the components.
Driving
on
racetracksHigher mechanical and thermal loads during
racetrack operation lead to increased wear.
This wear is not covered by the warranty. The
vehicle is not designed for use in motor sports competition.
The standard brake linings and the wear indij
cators are not designed for racetrack operaj tion.Seite 163BMW
M3
technologyDriving
tips163
Online Edition for Part no. 01 40 2 976 002 - X/16

Things
to
remember
when
drivingVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Breaking-in
period
General
information Moving parts need to begin working togethersmoothly.
The following instructions will help you to achj
ieve a long vehicle life and good efficiency.
During break-in, do not use the Launch Conj trol.
Safety
information WARNING
Due to new parts and components,
safety and driver assistance systems can react
with a delay. There is a risk of an accident. Afj
ter installing new parts or with a new vehicle,
drive conservatively and intervene early if necj
essary. Observe the break-in procedures of
the respective parts and components.'

General
driving
notes
Closing
the
tailgate WARNING
An open tailgate protrudes from the vehij
cle and can endanger occupants and other
traffic participants or damage the vehicle in the
event of an accident, braking or evasive maj
neuvers. In addition, exhaust fumes may enter
the vehicle interior. There is a risk of injury or
risk of damage to property. Do not drive with
the tailgate open.'

In certain braking situations, the perforated
brake discs can emit functional noises. Howj
ever, this has no effect on the performance and
operational reliability of the brake.
Objects
in
the
movement
area
around
pedals
and
floor
area
WARNING
Objects in the driver's floor area can limit
the pedal distance or block a depressed pedal.
There is a risk of an accident. Stow objects in
the vehicle such that they are secured and
cannot enter into the driver's floor area. Use
floor mats that are suitable for the vehicle and
can be safely attached to the floor. Do not use loose floor mats and do not layer several floormats. Make sure that there is sufficient clearjance for the pedals. Ensure that the floor mats
are securely fastened again after they were rej
moved, e.g., for cleaning.'

a risk of property damage. Ensure that there issufficient ground clearance available.'

LoadingVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Safety
information WARNING
High gross weight can overheat the tires,
damage them internally and cause a sudden
drop in tire inflation pressure. Driving characj
teristics may be negatively impacted, reducing
lane stability, lengthening the braking distanj ces and changing the steering response.
There is a risk of an accident. Pay attention to the permitted load capacity of the tires and
never exceed the permitted gross weight.'