2017 AUDI TT COUPE wheel

Wheels
plus maximum load. The maxi­
mum load includes the number of
passengers that the vehicle is in­
tended to carry ("seating capaci­
ty") with an assumed weight of 150 lbs (68 kg) for each passen­
ger at a designated seating posi­
tion and the total weight of any luggage in the vehicle.
The
Gross Axle Weight Rating
("GAWR") is the maximum load
that can be applied at each of the
vehicle's two axles.
The fact that there is an upper limit to your vehicle's Gross Vehi­
cle Weight Rating means that the
total weight of whatever is being
carried in the vehicle is limited.
The more passengers in the vehi­ cle or passengers who are heavier
than the standard weights as­
sumed mean that less weight can
be carried as luggage.
The Gross Vehicle Weight Rating and the Gross Axle Weight Rating
are listed on the safety compli­
ance sticker label located on the
driver's side B-pillar
c::> page 265,
fig. 198.
A WARNING
Overloading a vehicle can cause
loss of vehicle control, a crash
268
or other accident, serious per­
sonal injury, and even death.
-Carrying more weight than your vehicle was designed to carry will prevent the vehicle
from handling properly and
increase the risk of the loss of
vehicle control.
-The brakes on a vehicle that has been overloaded may not
be able to stop the vehicle
within a safe distance.
-Tires on a vehicle that has been overloaded can fail sud­
denly, including a blowout and
sudden deflation, causing loss
of control and a crash.
-Always make sure that the to­
tal load being transported does not make the vehicle
heavier than the vehicle's
Gross Vehicle Weight Rating.
Determining correct load
limit
Use the example below to calcu­
late the total weight of the pas­
sengers and luggage or other
things that you plan to transport
so that you can make sure that
your vehicle will not be overload- ed . ..

co
co
.... N
" N .... 0
0
Vl c:o
Steps for Determining Correct Load Limit
1 . Locate the stat em ent "THE
COMBINED WEIGHT OF OCCU­ PANTS AND CARGO SHOULD
NEVER EXCEED XXX KG OR X XX
LBS "on your vehi cle 's pla card
(tire inflation pr essure l abel)
¢ pag e 265 , fig. 198.
2 . Determine the combined
weight of the dri ver and pa s­
sengers that will be riding in
your vehicle.
3. Subtract the comb ined weight
of the driver and passengers
from
" XXX " kilograms or "XXX "
pounds shown on the sticker
¢ page 265, fig. 198 .
4. The resulting figure equals the
available amount of cargo and
luggage load ca pac ity. For ex­
ample, if the
"X XX" amount
equals 1400 lbs and there w ill
be five 150 lbs passengers in
your vehicle , the amount of
available cargo and luggage
load capacity is 650 lb s
(1400- 750 (5
X 150) = 650 lbs)
5. Determine the combined weight of luggage and cargo being loaded on the vehicle.
Th at weight ma y not safely ex­
ceed the a vailable cargo and
Wheels
luggage load capa cit y ca lc ulat ­
e d in Step 4.
6. If your vehicle will be towing a trailer, load f rom your trail er
will b e tran sferred to your ve­
hicle . Con sult thi s manual to
det ermine how this reduces
the a vailable cargo and lug­
gage load c apacity of your vehi ­
c le.
.,,.Check the tire sidewall
(¢ p age 255 , fig. 196) to deter­
mine th e designated lo ad rating
for a spe cifi c tire .
Wheel bolts and rims
Wheel bolts
Whee l bo lts must be clean and loosen/tig hte n
easily.
Rims
Rims with a bo lted r im ring* or with bolted w heel
cove rs* cons ist of mult iple p ieces . These compo­
nents were bolted togethe r using spec ial bolts
and a spe cial pro ced ure. Yo u m ust no t repai r or
disasse mble them
c::> ,&. .
_& WARNING ~ -
Wheel bo lt s th at are tightene d or rep aired in­
cor rect ly can become loose and resu lt in loss
of vehicle co ntro l, w hich increases the risk of
an accident. For t he cor rect tighten ing speci fi­
cation, see
c::> page 286, Finishing .
-Always keep the wheel bolts and the
threads in the wheel h ub clean and free of
grease.
- Onl y use wheel bolts that fit the rim.
- Always have damage d rims repaire d by an
author ized Audi dealer or author ized Audi
Serv ice Facility . Never repair o r disassemb le .,,.
269

Wheels
rims yourse lf, because this increases the risk
of an accident.
Winter tires
W inter tire s significan tly improve the vehicle 's
handling when driving in w inter condi tions. Be­
cause of the ir construction (width, compound,
tread pattern) , summe r tires p rovide less trac­
tion o n ice and snow.
.. Use w inter t ires o n all four wheels .
.. Only use w inter t ires that are approved for your
vehicle .
.. Please note that the maximum permitted
speed may be lower with winter tires
¢ & -An
a utho riz ed Aud i dea le r o r authorized Audi Serv­
ice Facility can inform you about the maximum
permitted speed fo r you r tires.
.. Check the tire pr essu re after installing whee ls
¢ page 265.
The effectiveness of winter tires is reduced great ­
ly whe n the tread is wor n down to a depth of
0 .157 in (4 mm). The character istics of winter
tires also decrease great ly as the tire ages, re­
gardless of the remaining tread.
A WARNING
- Never dr ive faste r than the maxim um per ­
mitted speed for your t ires . This cou ld cause
the tires to heat up too much. This increases
t h e risk of an a cciden t be ca use i t can c ause
t h e tire to burst.
- Always adapt yo ur driv ing to t he r oad and
t ra ffic conditions. Drive ca refully and red uce
yo ur sp eed on icy or slippery roads. Even
winte r tires can lose traction on black ice .
@ For the sake of the environment
Reinstall su mme r tir es at the approp ria te
t ime, because they provide bet ter ha ndling
when ro ads are free of snow a nd ice. S ummer
t ires cause less road noise, ti re wea r and fuel
consumption.
270
(D Tips
You can also use a ll season tires instea d of
winter tires . Please note that in some coun­
tries where winter tires are required, on ly
winter tires w it h the
& symbol may be per­
mitted.
' Snow chains
S now cha ins not on ly improve the driv ing in win­
te r road cond it io ns, but a lso the b raking .
.. On ly install snow chai ns on the front wheels .
T his applies also to vehicles with all wheel
dr ive*.
.. Check and co rrect t he seating of the snow
chains after driving a few feet, if nece ssary. Fol­
low t he inst ructions from the m anufac turer.
.. Note the max imum speed of 3 0 mph (50 km/
h). Note the local regulations.
U se of snow c hains is only permitte d wit h cert ain
rim/ tire comb inat ions due to technical reasons.
Check with a n authorized Audi dealer or author ­
i zed Audi Service Facility to see if you may use
snow chains.
You m ust remove the snow chains on roads wi th­
out snow . Otherwise, you co uld impair driving
ability and damage the t ires .
A WARNING
Using incor rect snow chains or installing snow
cha ins incor rectly can result in loss of vehicle
control, which increases the risk of an acci­
dent .
(D Note
-Snow chains can damage the rims/wheel
covers* if the c hains come into direct con­
tact with them. Remove the w heel covers *
first . Use coated snow cha ins .
- Us ing snow c hains that add more tha n 0.53
in (13,5 mm) of height can seve rely damage
the whee l housings and o ther vehicle com­
ponents .

Wheels
Tread wear
The
tread wear grade is a compara tive ra ting
based on the wear rate of the t ire when tes ted
under contro lled conditions on a specified gov­
ernment test course.
F or examp le, a tire graded 150 would wear one
and one half (11/2) t imes as well on the govern­
ment course as a tire graded 100 .
The rela tive perfo rman ce of t ires depe nds upon
t he act ua l condi tions of their use, howeve r, and
may depart signif icant ly from the norm due to
variations in d riving hab its, service practices and
d ifferences in road characteristics and climate .
T raction
The
tra ction g rades, from highes t to lowes t, are
AA, A, Band
C. T hose gr ades represen t the t ire's
ab ility to stop on wet pavement as meas ured un ­
der controlled conditions on specified govern­ m ent test sur faces of asphalt and conc ret e. A tire
marked C may have poor traction performance
¢ &, .
Temperature The
temperature grades are A (the highest), B,
and C, representing the tire's resistance to the
generation of heat and its ability to d iss ipate
heat when tested under controlled conditions on
a specified indoor laboratory test wheel.
Sustained high temperature can cause the mate ­
rial of the tire to degenerate and red uce tire life,
and excess ive temperature can lead to sudden
tire failure ¢&, .
The gra de C corresponds to a leve l of perform­
ance which a ll passenger ca r tires must meet un­
der the Federa l Moto r Vehicle Safety Standard
No. 109. Grades Band A represent higher leve ls
of performance on the laborato ry test wheel than
the m in imum required by law .
A WARNING
-
The traction grade ass igned to this tire is
based on straight -ahe ad braking t ract ion
t e sts, and does not include a ccele rat ion, cor­
nering, hydrop laning o r peak tract ion charac­
teristics .
272
A WARNING
--
The temperat ure grade for th is tire is estab­
lished for a tire that is properly inflated and
n ot overloaded . Excessive speed, underinfla­
tion, o r excessive load ing, either separately or
in comb ina tion, can ca use hea t bu ildu p and
possib le tire f ailure.
A WARNING
Tempe rature g rades apply to tire s th at are
p rope rly inflated and not over o r underinfla t­
e d.
-
Tire pressure monitoring
system
ill General notes
E ach tire, including the spare (if p rov ided),
shou ld be checked monthly when cold and in flat ­
ed to the inflat ion press ure recommended by the
vehicle manufacturer on the vehicle placard or
tire inflation pressure labe l. (If your veh icle has
tires of a different size than the size ind icated on
the ve hicle placard or tire inflat ion press ure la­
bel, you sho uld dete rm ine the proper t ire infla­
tion press ure for those tires).
As a n added safety feature, your vehicle has been
equipped with a tire pressure mon itor ing system
(TPMS) that illuminates a low tire p ressure tell ­
ta le when o ne or mo re of your tires is s ignificant­
l y unde r-inflated. According ly, w hen the low t ire
pressure tell tale illum ina tes, you sho uld stop and
c h ec k yo ur t ires as soon as possib le, and inf late
t h em to the proper p ressure . Dr iving on a sign ifi ­
cant ly under-inflated tire ca uses the tire to over­
heat and can lead to tire fa ilure. Und er- inflation
also red uces fue l eff iciency and tire tread life,
and may affect the vehicle's handling and stop­
ping ability .
P lease note that the TPMS is not a s ubstitute fo r
proper tire maintenance, and it is the dr iver 's re­
spons ibility to main tain correct t ire pressure,
even if under -in flat io n has not reached the level
to trigge r illumination of the TPM S low t ire pres-
su re te lltale . .,.

co
co
.... N
" N .... 0
0
Vl c:o
Your vehicle has also been equipped with a TPMS
malfunction indicator to indicate when the sys­
tem is not operating properly. The TPMS mal­
function indicator is combined with the low tire pressure telltale. When the system detects a
malfunction, the telltale will flash for approxi ­
mately one minute and then remain continuously
illuminated . This sequence will continue upon
subsequent vehicle start-ups as long as the mal­
function exists .
When the malfunction indicator is illuminated,
the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions
may occur for a variety of reasons, including the
installation of replacement or alternate tires or
wheels on the vehicle that prevent the TPMS
from functioning properly . Always check the
TPMS malfunction telltale after replacing one or
more tires or wheels on your vehicle to ensure
that the replacement or alternate tires and
wheels allow the TPMS to continue to function properly.
If the Tire Pressure Monitoring System
indicator appears
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too low
or if there is a system malfunction .
Using the ABS sensors, the tire pressure monitor­
ing system compares the tire tread circumfer­
ence and vibration characteristics of the individu­
al tires. If the pressure changes in one or more
tires, this is indicated in the Infotainment system
display w ith an indicator light
RE and a message.
If only one tire is affected, the location of that
tire will be indicated.
The tire pressures must be stored in the Infotain­
ment system again each time the pressures
change (switching between partial and full load
pressure) or after changing or replacing a tire on
your vehicle
c::;, page 274 . The tire pressure moni­
toring system only monitors the tire pressure you have stored. Refer to the tire pressure label for
the recommended tire pressure for your vehicle
¢ page 265, fig. 199.
Wheels
Tire tread circumference and vibration character­
istics can change and cause a tire pressure warn­
ing if :
- the tire pressure in one or more tires is too low.
- the tire has structural damage.
- the tire was replaced or the tire pressure was
changed and it was not stored
c::;, page 274.
- the spare tire* is installed .
Indicator lights
RE-Loss of pressure in at least one tire c::;, &,.
Check the tires and replace or repair if necessary.
Check/correct the pressures of all four tires and
store the pressure again in the Infotainment sys­
tem
¢ page 274.
mm (Tire Pressure Monitoring System) Tire
pressure: malfunction! See owner's manual -If
mm appears after switching on the ignition or
while driving and then the indicator light
RE in
the instrument cluster also starts to blink for
about one minute and then stays on permanent­
ly, there is a system malfunction. Try to store the
correct tire pressures
c::;, page 2 74 . If the indica­
tor light does turn off or turns on again after a short period of time, drive to an authorized Audi
dealer or authorized Audi Service Facility immedi­
ately to have the malfunction corrected.
A WARNING
..-
- If the tire pressure indicator appears in the
display, reduce your speed immediately and
avoid any hard steering or braking maneu­
vers. Stop as soon as possible and check the
tires and their pressure.
- The driver is responsible for maintaining the
correct tire pressures . You must check the
tire pressures regularly .
- Under certain conditions (such as a sporty
driving style, winter conditions or unpaved
roads), the pressure monitor indicator may
be delayed.
- Do not use run-flat tires on your vehicle . Us­
ing them when not permitted can lead to
vehicle damage or accidents.
273

Wheels
(D Tips
- The tire pressure monitoring system can al­
so stop work ing when there is an ESC mal­
funct ion.
- Using snow chains may result in a system
malfunction.
- The tires with the identification "AO"
¢ page 262 have been matched with your
A udi tire pressure monitoring system. We
r ecommend t hat you use these t ires.
Storing tire pressures
If the tire pressure changes or a tire is replaced, it must be confirmed in the Infotainment sys­tem .
... Make s ure before storing that the tire p ressures
of all fo ur t ires meet the specified val ues and
are adapted to the load
¢page 263 .
.,. Switc h on the ignition .
.,. Se lect in the In fota inment system: the
I MENU I
button > Vehicle > left contro l bu tton > Service
& checks > Tire pressure monitoring .
@ Tips
Do not store the tire press ures if snow chains
are i nsta lied.
274

Care and cleaning
wash operator to reduce the risk of acci­
dents.
- To reduce the risk of cuts, protect yourself
from sharp metal components when wash­ ing the underbody or the inside of the wheel
housings.
- After washing the vehicle, the braking effect
may be delayed due to moisture on the
brake rotors or ice in the winter. This in­
creases the risk of an accident. The brakes
must be dried first with a few careful brake
applications.
(D Note
- If you wash the vehicle in an automatic car
wash, you must retract the extendable rear
spoi ler* if necessary, and fold the exterior
mirrors in to reduce the risk of damage.
Power folding exterior mirrors* must only
be folded in and out using the power folding
function .
- To reduce the risk of paint damage, do not
wash the vehicle in direct sunlight. -
To reduce the risk of damage to the surface,
do not use insect removing sponges, kitchen
sponges or similar items.
- Matte finish painted vehicle components:
- To reduce the risk of damage to the sur-
face, do not use polishing agents or hard
wax.
- Never use protective wax. It can destroy
the matte finish effect.
- Do not place any stickers or magnetic
signs on vehicle parts painted with matte
finish paint. The paint could be damaged
when the stickers or magnets are re­
moved.
@ For the sake of the environment
Only wash the veh icle in facilities spec ially de­
signed for that purpose. This will reduce the
risk of dirty water contaminated with oil from
entering the sewer system.
Cleaning and care information
When cleaning and caring for individual vehicle
components, refer to the following tables. The
information contained there is simply recom­
mendations. For questions or for components that
are not listed, consult an authorized Audi
dealer or authorized Audi Service Facility. Also
follow the information found in¢.&. .
Exterior cleaning
Component Situation Solution
Windshield wiper
Deposits ¢ page42
blades
Headlights/
Deposits Soft sponge with
a m ild soap solution a>
Tail lights
Sensors/
Deposits Sensors: soft cloth with solvent-free cleaning solution
Camera lenses Camera lenses: soft cloth with alcohol -free cleaning solu-
tion
Snow/ice Hand brush/solvent-free de-icing spray
Wheels Road salt
Water
Brake dust Acid-free special cleaning solution
Exhaust tail pipes Road salt Water, cleaning solution suitab le for stainless steel, if nee-
essary
276

Care and cleaning
Component Situation Solution
Te xtil es
Deposits adhering to the Vacuum cleaner
artificial le ather, surface
A lcan tara Water-based deposits such Absorbent cloth and mild soap solution3>
as coffee, tea, blood, etc.
Oil-based depos its such as Apply a mild soap solution a>, blot away the dis-
oil, make-up, etc. sol.ved oil or dye, treat afterward with water, if nee-
essary
Special deposits such as ink, Special stain remover, blot with absorbent materi- nai l polish, latex paint, shoe al, treat afterward with mild soap solution, if neces-
polish, etc. sary
a)
Natural le ather Fr esh sta ins Wool cloth w
ith a mi ld soap solutiona l
Water-based deposits such Fresh stains: absorbent cloth
as coffee, tea, blood, etc . dried stains: stain remover suitable for leather
Oi l-based deposits s uch as Fresh stains: absorbent cloth and stain remover
oil, make-up , etc. suitable for leather
dried stains: oil cleaning spray
Special deposits such as ink, Spot remover suitable for leather
na il polish, latex pain t, shoe
polish, etc.
Care Regularly apply conditioning cream that protects
from light and penetrates into the material. Use
specially-colored conditioning cream, if necessa ry .
Carbon parts Deposits clean the same way as plastic parts
al M ild soap sol ution: maxim um two tablesp oons of neutral s oap in 1 quar t (1 liter) of wate r
A WARNING
The windshie ld may not be treated with wa­
ter-repell ing windshield coating agents . Un­
favorable cond itions s uch as wetness, dark­
ness, or low sun can result i n increased glare.
Wipe r blade chatter is also possible.
([) Note
-Headlights /tail lights
- N ever clean headlights or ta il lights with a
dry cloth or sponge .
- Do not use any cleaning p rodu ct that con­
tains alcohol, because they co uld cause
cracks to form .
-Wheels
-Never use any paint po lish or other abra-
sive mater ials.
278
-
- Damage to the protective laye r on the
rims such as stone chips or sc ratches must
be repaired immediately.
- Sensors/camera lenses
- Never use warm or hot water to remove
snow or ice from the camera lens . This
could cause the lens to cra ck.
- Never use abrasive cleaning materials or
a lcohol to clean the camera lens. This
could cause s cratches and cracks.
- Door w indow s
- Remove snow and ice on windows and ex -
terior mirrors with a plastic sc rape r. To
avoid scratches, move the scraper only in
one direct ion and not back and forth.
- Neve r remove snow or ice from door win­
dows and mirrors us ing warm or hot water
because this could cause cracks to form . ..,.